Symfony Profiler

[
  "product" => App\Entity\Product\Product {#7311
    #id: 9814
    #code: "IEEE00002999"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038579 {#7274
      date: 2025-06-27 17:36:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34265
        #name: "IEEE N42.12:1994"
        #slug: "ieee-n42-12-1994-ieee00002999-241466"
        #description: """
          New IEEE Standard - Active.<br />\n
          Methods for performance testing, calibration, and usage of NaI(Tl) detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the<br />\n
          determination of gamma ray energies and intensities are established. Both energy calibration and<br />\n
          efficiency calibration are covered.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of thallium-activated sodium iodide [NaI(Tl)] detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma ray energies and intensities. It covers both energy calibration and efficiency calibration. The following three techniques are considered:<br />\n
          a) Total spectrum counting (see 4.1) employs a system that counts all pulses above a low-energy<br />\n
          threshold (see 6.1, 6.2, and 6.3).<br />\n
          b) Single-channel analyzer (SCA) counting (see 4.2) employs a system with a counting “window,” which establishes upper and lower energy boundaries (see 6.1, 6.2, and 6.3).<br />\n
          c) Multichannel analyzer (MCA) counting (see 4.3) employs a system in which multiple counting windows are utilized. This technique allows measurements for which the continuum under the full energy peak may be subtracted without introducing unacceptable error.<br />\n
          In case of overlapping peaks in the spectrum, it is realized that an MCA with access to a spectrum-stripping program is necessary. Such cases are not covered by this standard.<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium<br />\n
          iodide detector systems for the measurement of gamma ray emission rates of radionuclides. Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. An NaI(Tl) detector system consists of three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photo multipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation that powers the photomultiplier and processes the output signal. (See IEEE Std 398-1972. The theory of operation of NaI(Tl) detectors is presented in numerous publications, including [B3], [B5], and [B9] in clause 7
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @791074800 {#7318
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @791074800 {#7316
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#93055
  +product: App\Entity\Product\Product {#7311
    #id: 9814
    #code: "IEEE00002999"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038579 {#7274
      date: 2025-06-27 17:36:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34265
        #name: "IEEE N42.12:1994"
        #slug: "ieee-n42-12-1994-ieee00002999-241466"
        #description: """
          New IEEE Standard - Active.<br />\n
          Methods for performance testing, calibration, and usage of NaI(Tl) detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the<br />\n
          determination of gamma ray energies and intensities are established. Both energy calibration and<br />\n
          efficiency calibration are covered.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of thallium-activated sodium iodide [NaI(Tl)] detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma ray energies and intensities. It covers both energy calibration and efficiency calibration. The following three techniques are considered:<br />\n
          a) Total spectrum counting (see 4.1) employs a system that counts all pulses above a low-energy<br />\n
          threshold (see 6.1, 6.2, and 6.3).<br />\n
          b) Single-channel analyzer (SCA) counting (see 4.2) employs a system with a counting “window,” which establishes upper and lower energy boundaries (see 6.1, 6.2, and 6.3).<br />\n
          c) Multichannel analyzer (MCA) counting (see 4.3) employs a system in which multiple counting windows are utilized. This technique allows measurements for which the continuum under the full energy peak may be subtracted without introducing unacceptable error.<br />\n
          In case of overlapping peaks in the spectrum, it is realized that an MCA with access to a spectrum-stripping program is necessary. Such cases are not covered by this standard.<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium<br />\n
          iodide detector systems for the measurement of gamma ray emission rates of radionuclides. Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. An NaI(Tl) detector system consists of three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photo multipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation that powers the photomultiplier and processes the output signal. (See IEEE Std 398-1972. The theory of operation of NaI(Tl) detectors is presented in numerous publications, including [B3], [B5], and [B9] in clause 7
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @791074800 {#7318
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @791074800 {#7316
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7311
    #id: 9814
    #code: "IEEE00002999"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038579 {#7274
      date: 2025-06-27 17:36:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34265
        #name: "IEEE N42.12:1994"
        #slug: "ieee-n42-12-1994-ieee00002999-241466"
        #description: """
          New IEEE Standard - Active.<br />\n
          Methods for performance testing, calibration, and usage of NaI(Tl) detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the<br />\n
          determination of gamma ray energies and intensities are established. Both energy calibration and<br />\n
          efficiency calibration are covered.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of thallium-activated sodium iodide [NaI(Tl)] detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma ray energies and intensities. It covers both energy calibration and efficiency calibration. The following three techniques are considered:<br />\n
          a) Total spectrum counting (see 4.1) employs a system that counts all pulses above a low-energy<br />\n
          threshold (see 6.1, 6.2, and 6.3).<br />\n
          b) Single-channel analyzer (SCA) counting (see 4.2) employs a system with a counting “window,” which establishes upper and lower energy boundaries (see 6.1, 6.2, and 6.3).<br />\n
          c) Multichannel analyzer (MCA) counting (see 4.3) employs a system in which multiple counting windows are utilized. This technique allows measurements for which the continuum under the full energy peak may be subtracted without introducing unacceptable error.<br />\n
          In case of overlapping peaks in the spectrum, it is realized that an MCA with access to a spectrum-stripping program is necessary. Such cases are not covered by this standard.<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium<br />\n
          iodide detector systems for the measurement of gamma ray emission rates of radionuclides. Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. An NaI(Tl) detector system consists of three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photo multipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation that powers the photomultiplier and processes the output signal. (See IEEE Std 398-1972. The theory of operation of NaI(Tl) detectors is presented in numerous publications, including [B3], [B5], and [B9] in clause 7
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @791074800 {#7318
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @791074800 {#7316
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]

App\Twig\Components\ProductType {#93233
  +product: App\Entity\Product\Product {#7311
    #id: 9814
    #code: "IEEE00002999"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038579 {#7274
      date: 2025-06-27 17:36:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34265
        #name: "IEEE N42.12:1994"
        #slug: "ieee-n42-12-1994-ieee00002999-241466"
        #description: """
          New IEEE Standard - Active.<br />\n
          Methods for performance testing, calibration, and usage of NaI(Tl) detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the<br />\n
          determination of gamma ray energies and intensities are established. Both energy calibration and<br />\n
          efficiency calibration are covered.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of thallium-activated sodium iodide [NaI(Tl)] detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma ray energies and intensities. It covers both energy calibration and efficiency calibration. The following three techniques are considered:<br />\n
          a) Total spectrum counting (see 4.1) employs a system that counts all pulses above a low-energy<br />\n
          threshold (see 6.1, 6.2, and 6.3).<br />\n
          b) Single-channel analyzer (SCA) counting (see 4.2) employs a system with a counting “window,” which establishes upper and lower energy boundaries (see 6.1, 6.2, and 6.3).<br />\n
          c) Multichannel analyzer (MCA) counting (see 4.3) employs a system in which multiple counting windows are utilized. This technique allows measurements for which the continuum under the full energy peak may be subtracted without introducing unacceptable error.<br />\n
          In case of overlapping peaks in the spectrum, it is realized that an MCA with access to a spectrum-stripping program is necessary. Such cases are not covered by this standard.<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium<br />\n
          iodide detector systems for the measurement of gamma ray emission rates of radionuclides. Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. An NaI(Tl) detector system consists of three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photo multipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation that powers the photomultiplier and processes the output signal. (See IEEE Std 398-1972. The theory of operation of NaI(Tl) detectors is presented in numerous publications, including [B3], [B5], and [B9] in clause 7
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @791074800 {#7318
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @791074800 {#7316
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Standard"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7311
    #id: 9814
    #code: "IEEE00002999"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038579 {#7274
      date: 2025-06-27 17:36:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34265
        #name: "IEEE N42.12:1994"
        #slug: "ieee-n42-12-1994-ieee00002999-241466"
        #description: """
          New IEEE Standard - Active.<br />\n
          Methods for performance testing, calibration, and usage of NaI(Tl) detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the<br />\n
          determination of gamma ray energies and intensities are established. Both energy calibration and<br />\n
          efficiency calibration are covered.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of thallium-activated sodium iodide [NaI(Tl)] detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma ray energies and intensities. It covers both energy calibration and efficiency calibration. The following three techniques are considered:<br />\n
          a) Total spectrum counting (see 4.1) employs a system that counts all pulses above a low-energy<br />\n
          threshold (see 6.1, 6.2, and 6.3).<br />\n
          b) Single-channel analyzer (SCA) counting (see 4.2) employs a system with a counting “window,” which establishes upper and lower energy boundaries (see 6.1, 6.2, and 6.3).<br />\n
          c) Multichannel analyzer (MCA) counting (see 4.3) employs a system in which multiple counting windows are utilized. This technique allows measurements for which the continuum under the full energy peak may be subtracted without introducing unacceptable error.<br />\n
          In case of overlapping peaks in the spectrum, it is realized that an MCA with access to a spectrum-stripping program is necessary. Such cases are not covered by this standard.<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium<br />\n
          iodide detector systems for the measurement of gamma ray emission rates of radionuclides. Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. An NaI(Tl) detector system consists of three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photo multipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation that powers the photomultiplier and processes the output signal. (See IEEE Std 398-1972. The theory of operation of NaI(Tl) detectors is presented in numerous publications, including [B3], [B5], and [B9] in clause 7
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @791074800 {#7318
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @791074800 {#7316
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]

App\Twig\Components\ProductMostRecent {#93300
  +product: App\Entity\Product\Product {#7311
    #id: 9814
    #code: "IEEE00002999"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038579 {#7274
      date: 2025-06-27 17:36:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34265
        #name: "IEEE N42.12:1994"
        #slug: "ieee-n42-12-1994-ieee00002999-241466"
        #description: """
          New IEEE Standard - Active.<br />\n
          Methods for performance testing, calibration, and usage of NaI(Tl) detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the<br />\n
          determination of gamma ray energies and intensities are established. Both energy calibration and<br />\n
          efficiency calibration are covered.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of thallium-activated sodium iodide [NaI(Tl)] detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma ray energies and intensities. It covers both energy calibration and efficiency calibration. The following three techniques are considered:<br />\n
          a) Total spectrum counting (see 4.1) employs a system that counts all pulses above a low-energy<br />\n
          threshold (see 6.1, 6.2, and 6.3).<br />\n
          b) Single-channel analyzer (SCA) counting (see 4.2) employs a system with a counting “window,” which establishes upper and lower energy boundaries (see 6.1, 6.2, and 6.3).<br />\n
          c) Multichannel analyzer (MCA) counting (see 4.3) employs a system in which multiple counting windows are utilized. This technique allows measurements for which the continuum under the full energy peak may be subtracted without introducing unacceptable error.<br />\n
          In case of overlapping peaks in the spectrum, it is realized that an MCA with access to a spectrum-stripping program is necessary. Such cases are not covered by this standard.<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium<br />\n
          iodide detector systems for the measurement of gamma ray emission rates of radionuclides. Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. An NaI(Tl) detector system consists of three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photo multipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation that powers the photomultiplier and processes the output signal. (See IEEE Std 398-1972. The theory of operation of NaI(Tl) detectors is presented in numerous publications, including [B3], [B5], and [B9] in clause 7
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @791074800 {#7318
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @791074800 {#7316
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7311
    #id: 9814
    #code: "IEEE00002999"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038579 {#7274
      date: 2025-06-27 17:36:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34265
        #name: "IEEE N42.12:1994"
        #slug: "ieee-n42-12-1994-ieee00002999-241466"
        #description: """
          New IEEE Standard - Active.<br />\n
          Methods for performance testing, calibration, and usage of NaI(Tl) detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the<br />\n
          determination of gamma ray energies and intensities are established. Both energy calibration and<br />\n
          efficiency calibration are covered.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of thallium-activated sodium iodide [NaI(Tl)] detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma ray energies and intensities. It covers both energy calibration and efficiency calibration. The following three techniques are considered:<br />\n
          a) Total spectrum counting (see 4.1) employs a system that counts all pulses above a low-energy<br />\n
          threshold (see 6.1, 6.2, and 6.3).<br />\n
          b) Single-channel analyzer (SCA) counting (see 4.2) employs a system with a counting “window,” which establishes upper and lower energy boundaries (see 6.1, 6.2, and 6.3).<br />\n
          c) Multichannel analyzer (MCA) counting (see 4.3) employs a system in which multiple counting windows are utilized. This technique allows measurements for which the continuum under the full energy peak may be subtracted without introducing unacceptable error.<br />\n
          In case of overlapping peaks in the spectrum, it is realized that an MCA with access to a spectrum-stripping program is necessary. Such cases are not covered by this standard.<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium<br />\n
          iodide detector systems for the measurement of gamma ray emission rates of radionuclides. Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. An NaI(Tl) detector system consists of three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photo multipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation that powers the photomultiplier and processes the output signal. (See IEEE Std 398-1972. The theory of operation of NaI(Tl) detectors is presented in numerous publications, including [B3], [B5], and [B9] in clause 7
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @791074800 {#7318
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @791074800 {#7316
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#100297
  +product: App\Entity\Product\Product {#7311
    #id: 9814
    #code: "IEEE00002999"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038579 {#7274
      date: 2025-06-27 17:36:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34265
        #name: "IEEE N42.12:1994"
        #slug: "ieee-n42-12-1994-ieee00002999-241466"
        #description: """
          New IEEE Standard - Active.<br />\n
          Methods for performance testing, calibration, and usage of NaI(Tl) detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the<br />\n
          determination of gamma ray energies and intensities are established. Both energy calibration and<br />\n
          efficiency calibration are covered.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of thallium-activated sodium iodide [NaI(Tl)] detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma ray energies and intensities. It covers both energy calibration and efficiency calibration. The following three techniques are considered:<br />\n
          a) Total spectrum counting (see 4.1) employs a system that counts all pulses above a low-energy<br />\n
          threshold (see 6.1, 6.2, and 6.3).<br />\n
          b) Single-channel analyzer (SCA) counting (see 4.2) employs a system with a counting “window,” which establishes upper and lower energy boundaries (see 6.1, 6.2, and 6.3).<br />\n
          c) Multichannel analyzer (MCA) counting (see 4.3) employs a system in which multiple counting windows are utilized. This technique allows measurements for which the continuum under the full energy peak may be subtracted without introducing unacceptable error.<br />\n
          In case of overlapping peaks in the spectrum, it is realized that an MCA with access to a spectrum-stripping program is necessary. Such cases are not covered by this standard.<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium<br />\n
          iodide detector systems for the measurement of gamma ray emission rates of radionuclides. Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. An NaI(Tl) detector system consists of three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photo multipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation that powers the photomultiplier and processes the output signal. (See IEEE Std 398-1972. The theory of operation of NaI(Tl) detectors is presented in numerous publications, including [B3], [B5], and [B9] in clause 7
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @791074800 {#7318
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @791074800 {#7316
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7311
    #id: 9814
    #code: "IEEE00002999"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038579 {#7274
      date: 2025-06-27 17:36:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34265
        #name: "IEEE N42.12:1994"
        #slug: "ieee-n42-12-1994-ieee00002999-241466"
        #description: """
          New IEEE Standard - Active.<br />\n
          Methods for performance testing, calibration, and usage of NaI(Tl) detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the<br />\n
          determination of gamma ray energies and intensities are established. Both energy calibration and<br />\n
          efficiency calibration are covered.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of thallium-activated sodium iodide [NaI(Tl)] detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma ray energies and intensities. It covers both energy calibration and efficiency calibration. The following three techniques are considered:<br />\n
          a) Total spectrum counting (see 4.1) employs a system that counts all pulses above a low-energy<br />\n
          threshold (see 6.1, 6.2, and 6.3).<br />\n
          b) Single-channel analyzer (SCA) counting (see 4.2) employs a system with a counting “window,” which establishes upper and lower energy boundaries (see 6.1, 6.2, and 6.3).<br />\n
          c) Multichannel analyzer (MCA) counting (see 4.3) employs a system in which multiple counting windows are utilized. This technique allows measurements for which the continuum under the full energy peak may be subtracted without introducing unacceptable error.<br />\n
          In case of overlapping peaks in the spectrum, it is realized that an MCA with access to a spectrum-stripping program is necessary. Such cases are not covered by this standard.<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium<br />\n
          iodide detector systems for the measurement of gamma ray emission rates of radionuclides. Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. An NaI(Tl) detector system consists of three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photo multipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation that powers the photomultiplier and processes the output signal. (See IEEE Std 398-1972. The theory of operation of NaI(Tl) detectors is presented in numerous publications, including [B3], [B5], and [B9] in clause 7
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @791074800 {#7318
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @791074800 {#7316
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]

App\Twig\Components\ProductMostRecent {#100361
  +product: App\Entity\Product\Product {#7311
    #id: 9814
    #code: "IEEE00002999"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038579 {#7274
      date: 2025-06-27 17:36:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34265
        #name: "IEEE N42.12:1994"
        #slug: "ieee-n42-12-1994-ieee00002999-241466"
        #description: """
          New IEEE Standard - Active.<br />\n
          Methods for performance testing, calibration, and usage of NaI(Tl) detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the<br />\n
          determination of gamma ray energies and intensities are established. Both energy calibration and<br />\n
          efficiency calibration are covered.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of thallium-activated sodium iodide [NaI(Tl)] detector systems for the measurement of gamma ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma ray energies and intensities. It covers both energy calibration and efficiency calibration. The following three techniques are considered:<br />\n
          a) Total spectrum counting (see 4.1) employs a system that counts all pulses above a low-energy<br />\n
          threshold (see 6.1, 6.2, and 6.3).<br />\n
          b) Single-channel analyzer (SCA) counting (see 4.2) employs a system with a counting “window,” which establishes upper and lower energy boundaries (see 6.1, 6.2, and 6.3).<br />\n
          c) Multichannel analyzer (MCA) counting (see 4.3) employs a system in which multiple counting windows are utilized. This technique allows measurements for which the continuum under the full energy peak may be subtracted without introducing unacceptable error.<br />\n
          In case of overlapping peaks in the spectrum, it is realized that an MCA with access to a spectrum-stripping program is necessary. Such cases are not covered by this standard.<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium<br />\n
          iodide detector systems for the measurement of gamma ray emission rates of radionuclides. Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. An NaI(Tl) detector system consists of three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photo multipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation that powers the photomultiplier and processes the output signal. (See IEEE Std 398-1972. The theory of operation of NaI(Tl) detectors is presented in numerous publications, including [B3], [B5], and [B9] in clause 7
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @791074800 {#7318
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @791074800 {#7316
      date: 1995-01-26 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#100276
    #id: 9815
    #code: "IEEE00003000"
    #attributes: Doctrine\ORM\PersistentCollection {#100257 …}
    #variants: Doctrine\ORM\PersistentCollection {#100254 …}
    #options: Doctrine\ORM\PersistentCollection {#100250 …}
    #associations: Doctrine\ORM\PersistentCollection {#100252 …}
    #createdAt: DateTime @1751038580 {#100282
      date: 2025-06-27 17:36:20.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#100243
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100267 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100435
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100276}
        #id: 34269
        #name: "IEEE/ANSI N42.12:1980 (R1985)"
        #slug: "ieee-ansi-n42-12-1980-r1985-ieee00003000-241467"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Methods are established for performance testing, calibration, and use of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides, assay for radioactivity, and the determination of gamma-ray energies. Both energy calibration and efficiency calibration are covered. Three techniques are considered: total spectrum counting, which employs a system that counts all events above a low-energy threshold; single-channel analyzer counting, which employs a system with a counting window that establishes upper and lower energy boundaries; and multichannel analyzer counting, which employs a system utilizing multiple counting windows.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma-ray energies. It covers both energy calibration and efficiency calibration. The following three techniques are considered: (1) Total spectrum counting (see 5.1) employs a system that counts all events above a low-energy threshold (see 7.1, 7.2, and 7.3). (2) Single-channel analyzer counting (see 5.2) employs a system with a counting window which establishes upper and lower energy boundaries (see 7.1, 7.2, and 7.3). (3) Multichannel analyzer counting (see 5.3) employs a system in which multiple counting windows are utilized. This technique applies to measurements that do not involve overlapping peaks and those for which the continuum under the full-energy peak can be subtracted without introducing unacceptable error [4].<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides.<br />\n
          Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. A sodium iodide detector system consists of: &quot;. . .three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photomultipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation which powers the photomultiplier and processes the output signal&quot;. [See ANSI/IEEE Std 398-1972 (Reaff 1977), Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field.] The theory of operation of sodium iodide detectors is presented in numerous publications, including refs [1] - [3]
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Sodium Iodide Detector Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100265 …}
    #channels: Doctrine\ORM\PersistentCollection {#100259 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100263 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100261 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100274 …}
    -apiLastModifiedAt: DateTime @1743289200 {#100256
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#100283
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @343609200 {#100287
      date: 1980-11-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @473382000 {#100241
      date: 1985-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 11
    -documents: Doctrine\ORM\PersistentCollection {#100272 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100270 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#100450
  +product: App\Entity\Product\Product {#100276
    #id: 9815
    #code: "IEEE00003000"
    #attributes: Doctrine\ORM\PersistentCollection {#100257 …}
    #variants: Doctrine\ORM\PersistentCollection {#100254 …}
    #options: Doctrine\ORM\PersistentCollection {#100250 …}
    #associations: Doctrine\ORM\PersistentCollection {#100252 …}
    #createdAt: DateTime @1751038580 {#100282
      date: 2025-06-27 17:36:20.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#100243
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100267 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100435
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100276}
        #id: 34269
        #name: "IEEE/ANSI N42.12:1980 (R1985)"
        #slug: "ieee-ansi-n42-12-1980-r1985-ieee00003000-241467"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Methods are established for performance testing, calibration, and use of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides, assay for radioactivity, and the determination of gamma-ray energies. Both energy calibration and efficiency calibration are covered. Three techniques are considered: total spectrum counting, which employs a system that counts all events above a low-energy threshold; single-channel analyzer counting, which employs a system with a counting window that establishes upper and lower energy boundaries; and multichannel analyzer counting, which employs a system utilizing multiple counting windows.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma-ray energies. It covers both energy calibration and efficiency calibration. The following three techniques are considered: (1) Total spectrum counting (see 5.1) employs a system that counts all events above a low-energy threshold (see 7.1, 7.2, and 7.3). (2) Single-channel analyzer counting (see 5.2) employs a system with a counting window which establishes upper and lower energy boundaries (see 7.1, 7.2, and 7.3). (3) Multichannel analyzer counting (see 5.3) employs a system in which multiple counting windows are utilized. This technique applies to measurements that do not involve overlapping peaks and those for which the continuum under the full-energy peak can be subtracted without introducing unacceptable error [4].<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides.<br />\n
          Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. A sodium iodide detector system consists of: &quot;. . .three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photomultipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation which powers the photomultiplier and processes the output signal&quot;. [See ANSI/IEEE Std 398-1972 (Reaff 1977), Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field.] The theory of operation of sodium iodide detectors is presented in numerous publications, including refs [1] - [3]
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Sodium Iodide Detector Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100265 …}
    #channels: Doctrine\ORM\PersistentCollection {#100259 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100263 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100261 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100274 …}
    -apiLastModifiedAt: DateTime @1743289200 {#100256
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#100283
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @343609200 {#100287
      date: 1980-11-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @473382000 {#100241
      date: 1985-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 11
    -documents: Doctrine\ORM\PersistentCollection {#100272 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100270 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
    "Confirmed"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#100276
    #id: 9815
    #code: "IEEE00003000"
    #attributes: Doctrine\ORM\PersistentCollection {#100257 …}
    #variants: Doctrine\ORM\PersistentCollection {#100254 …}
    #options: Doctrine\ORM\PersistentCollection {#100250 …}
    #associations: Doctrine\ORM\PersistentCollection {#100252 …}
    #createdAt: DateTime @1751038580 {#100282
      date: 2025-06-27 17:36:20.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#100243
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100267 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100435
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100276}
        #id: 34269
        #name: "IEEE/ANSI N42.12:1980 (R1985)"
        #slug: "ieee-ansi-n42-12-1980-r1985-ieee00003000-241467"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Methods are established for performance testing, calibration, and use of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides, assay for radioactivity, and the determination of gamma-ray energies. Both energy calibration and efficiency calibration are covered. Three techniques are considered: total spectrum counting, which employs a system that counts all events above a low-energy threshold; single-channel analyzer counting, which employs a system with a counting window that establishes upper and lower energy boundaries; and multichannel analyzer counting, which employs a system utilizing multiple counting windows.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma-ray energies. It covers both energy calibration and efficiency calibration. The following three techniques are considered: (1) Total spectrum counting (see 5.1) employs a system that counts all events above a low-energy threshold (see 7.1, 7.2, and 7.3). (2) Single-channel analyzer counting (see 5.2) employs a system with a counting window which establishes upper and lower energy boundaries (see 7.1, 7.2, and 7.3). (3) Multichannel analyzer counting (see 5.3) employs a system in which multiple counting windows are utilized. This technique applies to measurements that do not involve overlapping peaks and those for which the continuum under the full-energy peak can be subtracted without introducing unacceptable error [4].<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides.<br />\n
          Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. A sodium iodide detector system consists of: &quot;. . .three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photomultipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation which powers the photomultiplier and processes the output signal&quot;. [See ANSI/IEEE Std 398-1972 (Reaff 1977), Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field.] The theory of operation of sodium iodide detectors is presented in numerous publications, including refs [1] - [3]
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Sodium Iodide Detector Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100265 …}
    #channels: Doctrine\ORM\PersistentCollection {#100259 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100263 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100261 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100274 …}
    -apiLastModifiedAt: DateTime @1743289200 {#100256
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#100283
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @343609200 {#100287
      date: 1980-11-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @473382000 {#100241
      date: 1985-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 11
    -documents: Doctrine\ORM\PersistentCollection {#100272 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100270 …}
  }
]

App\Twig\Components\ProductMostRecent {#100515
  +product: App\Entity\Product\Product {#100276
    #id: 9815
    #code: "IEEE00003000"
    #attributes: Doctrine\ORM\PersistentCollection {#100257 …}
    #variants: Doctrine\ORM\PersistentCollection {#100254 …}
    #options: Doctrine\ORM\PersistentCollection {#100250 …}
    #associations: Doctrine\ORM\PersistentCollection {#100252 …}
    #createdAt: DateTime @1751038580 {#100282
      date: 2025-06-27 17:36:20.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#100243
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100267 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100435
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100276}
        #id: 34269
        #name: "IEEE/ANSI N42.12:1980 (R1985)"
        #slug: "ieee-ansi-n42-12-1980-r1985-ieee00003000-241467"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Methods are established for performance testing, calibration, and use of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides, assay for radioactivity, and the determination of gamma-ray energies. Both energy calibration and efficiency calibration are covered. Three techniques are considered: total spectrum counting, which employs a system that counts all events above a low-energy threshold; single-channel analyzer counting, which employs a system with a counting window that establishes upper and lower energy boundaries; and multichannel analyzer counting, which employs a system utilizing multiple counting windows.<br />\n
          \t\t\t\t<br />\n
          This standard establishes methods for performance testing, calibration, and usage of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides; the assay for radioactivity; and the determination of gamma-ray energies. It covers both energy calibration and efficiency calibration. The following three techniques are considered: (1) Total spectrum counting (see 5.1) employs a system that counts all events above a low-energy threshold (see 7.1, 7.2, and 7.3). (2) Single-channel analyzer counting (see 5.2) employs a system with a counting window which establishes upper and lower energy boundaries (see 7.1, 7.2, and 7.3). (3) Multichannel analyzer counting (see 5.3) employs a system in which multiple counting windows are utilized. This technique applies to measurements that do not involve overlapping peaks and those for which the continuum under the full-energy peak can be subtracted without introducing unacceptable error [4].<br />\n
          The purpose of this document is to provide a standardized basis for the calibration and usage of sodium iodide detector systems for the measurement of gamma-ray emission rates of radionuclides.<br />\n
          Typical applications include radionuclide identification and assay in various industrial, environmental, and medical applications. A sodium iodide detector system consists of: &quot;. . .three major components: a scintillating medium that produces a flash of light when ionizing radiation interacts with it; one or more photomultipliers, optically coupled to the scintillator, which converts the light flash to an amplified electrical impulse; and associated electronic instrumentation which powers the photomultiplier and processes the output signal&quot;. [See ANSI/IEEE Std 398-1972 (Reaff 1977), Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field.] The theory of operation of sodium iodide detectors is presented in numerous publications, including refs [1] - [3]
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Calibration and Usage of Sodium Iodide Detector Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100265 …}
    #channels: Doctrine\ORM\PersistentCollection {#100259 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100263 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100261 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100274 …}
    -apiLastModifiedAt: DateTime @1743289200 {#100256
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#100283
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @343609200 {#100287
      date: 1980-11-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @473382000 {#100241
      date: 1985-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "N42.12"
    -bookCollection: ""
    -pageCount: 11
    -documents: Doctrine\ORM\PersistentCollection {#100272 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100270 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#121794
    #id: 8522
    #code: "IEEE00000610"
    #attributes: Doctrine\ORM\PersistentCollection {#121774 …}
    #variants: Doctrine\ORM\PersistentCollection {#121772 …}
    #options: Doctrine\ORM\PersistentCollection {#121767 …}
    #associations: Doctrine\ORM\PersistentCollection {#121769 …}
    #createdAt: DateTime @1751037488 {#121765
      date: 2025-06-27 17:18:08.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121800
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#121785 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#121878
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121794}
        #id: 29097
        #name: "IEEE 398:1972 (R2006)"
        #slug: "ieee-398-1972-r2006-ieee00000610-240174"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Tests for measuring the pulse-height, spurious-pulse, and pulse-timing characteristics of photomultipliers used in scintillation and Cerenkov counters are presented. Five different measurement techniques are described. They are rise-time measurements, fall-time measurements, photocathode transit-time difference measurements, and transit-time spread measurements.<br />\n
          \t\t\t\t<br />\n
          The photomultiplier is an essential component in scintillation and Cerenkov counting. In these applications there are special requirements with regard to pulse-height characteristics, spurious pulses, and timing.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121782 …}
    #channels: Doctrine\ORM\PersistentCollection {#121776 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#121780 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#121778 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121791 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121751
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1580338800 {#121799
      date: 2020-01-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @85791600 {#121758
      date: 1972-09-20 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1143669600 {#121771
      date: 2006-03-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#121792
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "398"
    -bookCollection: ""
    -pageCount: 125
    -documents: Doctrine\ORM\PersistentCollection {#121789 …}
    -favorites: Doctrine\ORM\PersistentCollection {#121787 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "additionalClasses" => "product__teaser--with-grey-border"
  "hasStretchedLink" => true
  "hoverType" => "shadow"
  "linkLabel" => "See more"
]

App\Twig\Components\ProductCard {#121831
  +product: App\Entity\Product\Product {#121794
    #id: 8522
    #code: "IEEE00000610"
    #attributes: Doctrine\ORM\PersistentCollection {#121774 …}
    #variants: Doctrine\ORM\PersistentCollection {#121772 …}
    #options: Doctrine\ORM\PersistentCollection {#121767 …}
    #associations: Doctrine\ORM\PersistentCollection {#121769 …}
    #createdAt: DateTime @1751037488 {#121765
      date: 2025-06-27 17:18:08.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121800
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#121785 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#121878
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121794}
        #id: 29097
        #name: "IEEE 398:1972 (R2006)"
        #slug: "ieee-398-1972-r2006-ieee00000610-240174"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Tests for measuring the pulse-height, spurious-pulse, and pulse-timing characteristics of photomultipliers used in scintillation and Cerenkov counters are presented. Five different measurement techniques are described. They are rise-time measurements, fall-time measurements, photocathode transit-time difference measurements, and transit-time spread measurements.<br />\n
          \t\t\t\t<br />\n
          The photomultiplier is an essential component in scintillation and Cerenkov counting. In these applications there are special requirements with regard to pulse-height characteristics, spurious pulses, and timing.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121782 …}
    #channels: Doctrine\ORM\PersistentCollection {#121776 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#121780 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#121778 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121791 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121751
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1580338800 {#121799
      date: 2020-01-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @85791600 {#121758
      date: 1972-09-20 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1143669600 {#121771
      date: 2006-03-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#121792
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "398"
    -bookCollection: ""
    -pageCount: 125
    -documents: Doctrine\ORM\PersistentCollection {#121789 …}
    -favorites: Doctrine\ORM\PersistentCollection {#121787 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "product__teaser--with-grey-border"
  +linkLabel: "See more"
  +imageFilter: "product_thumbnail_teaser"
  +hasStretchedLink: true
  +backgroundColor: "white"
  +hoverType: "shadow"
}

[
  "product" => App\Entity\Product\Product {#121794
    #id: 8522
    #code: "IEEE00000610"
    #attributes: Doctrine\ORM\PersistentCollection {#121774 …}
    #variants: Doctrine\ORM\PersistentCollection {#121772 …}
    #options: Doctrine\ORM\PersistentCollection {#121767 …}
    #associations: Doctrine\ORM\PersistentCollection {#121769 …}
    #createdAt: DateTime @1751037488 {#121765
      date: 2025-06-27 17:18:08.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121800
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#121785 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#121878
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121794}
        #id: 29097
        #name: "IEEE 398:1972 (R2006)"
        #slug: "ieee-398-1972-r2006-ieee00000610-240174"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Tests for measuring the pulse-height, spurious-pulse, and pulse-timing characteristics of photomultipliers used in scintillation and Cerenkov counters are presented. Five different measurement techniques are described. They are rise-time measurements, fall-time measurements, photocathode transit-time difference measurements, and transit-time spread measurements.<br />\n
          \t\t\t\t<br />\n
          The photomultiplier is an essential component in scintillation and Cerenkov counting. In these applications there are special requirements with regard to pulse-height characteristics, spurious pulses, and timing.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121782 …}
    #channels: Doctrine\ORM\PersistentCollection {#121776 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#121780 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#121778 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121791 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121751
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1580338800 {#121799
      date: 2020-01-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @85791600 {#121758
      date: 1972-09-20 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1143669600 {#121771
      date: 2006-03-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#121792
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "398"
    -bookCollection: ""
    -pageCount: 125
    -documents: Doctrine\ORM\PersistentCollection {#121789 …}
    -favorites: Doctrine\ORM\PersistentCollection {#121787 …}
  }
]

[
  "showFullLabel" => false
]

App\Twig\Components\ProductState {#121882
  +product: App\Entity\Product\Product {#121794
    #id: 8522
    #code: "IEEE00000610"
    #attributes: Doctrine\ORM\PersistentCollection {#121774 …}
    #variants: Doctrine\ORM\PersistentCollection {#121772 …}
    #options: Doctrine\ORM\PersistentCollection {#121767 …}
    #associations: Doctrine\ORM\PersistentCollection {#121769 …}
    #createdAt: DateTime @1751037488 {#121765
      date: 2025-06-27 17:18:08.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121800
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#121785 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#121878
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121794}
        #id: 29097
        #name: "IEEE 398:1972 (R2006)"
        #slug: "ieee-398-1972-r2006-ieee00000610-240174"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Tests for measuring the pulse-height, spurious-pulse, and pulse-timing characteristics of photomultipliers used in scintillation and Cerenkov counters are presented. Five different measurement techniques are described. They are rise-time measurements, fall-time measurements, photocathode transit-time difference measurements, and transit-time spread measurements.<br />\n
          \t\t\t\t<br />\n
          The photomultiplier is an essential component in scintillation and Cerenkov counting. In these applications there are special requirements with regard to pulse-height characteristics, spurious pulses, and timing.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121782 …}
    #channels: Doctrine\ORM\PersistentCollection {#121776 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#121780 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#121778 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121791 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121751
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1580338800 {#121799
      date: 2020-01-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @85791600 {#121758
      date: 1972-09-20 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1143669600 {#121771
      date: 2006-03-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#121792
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "398"
    -bookCollection: ""
    -pageCount: 125
    -documents: Doctrine\ORM\PersistentCollection {#121789 …}
    -favorites: Doctrine\ORM\PersistentCollection {#121787 …}
  }
  +appearance: "state-withdrawn"
  +labels: [
    "Withdrawn"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#121794
    #id: 8522
    #code: "IEEE00000610"
    #attributes: Doctrine\ORM\PersistentCollection {#121774 …}
    #variants: Doctrine\ORM\PersistentCollection {#121772 …}
    #options: Doctrine\ORM\PersistentCollection {#121767 …}
    #associations: Doctrine\ORM\PersistentCollection {#121769 …}
    #createdAt: DateTime @1751037488 {#121765
      date: 2025-06-27 17:18:08.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121800
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#121785 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#121878
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121794}
        #id: 29097
        #name: "IEEE 398:1972 (R2006)"
        #slug: "ieee-398-1972-r2006-ieee00000610-240174"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Tests for measuring the pulse-height, spurious-pulse, and pulse-timing characteristics of photomultipliers used in scintillation and Cerenkov counters are presented. Five different measurement techniques are described. They are rise-time measurements, fall-time measurements, photocathode transit-time difference measurements, and transit-time spread measurements.<br />\n
          \t\t\t\t<br />\n
          The photomultiplier is an essential component in scintillation and Cerenkov counting. In these applications there are special requirements with regard to pulse-height characteristics, spurious pulses, and timing.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121782 …}
    #channels: Doctrine\ORM\PersistentCollection {#121776 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#121780 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#121778 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121791 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121751
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1580338800 {#121799
      date: 2020-01-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @85791600 {#121758
      date: 1972-09-20 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1143669600 {#121771
      date: 2006-03-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#121792
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "398"
    -bookCollection: ""
    -pageCount: 125
    -documents: Doctrine\ORM\PersistentCollection {#121789 …}
    -favorites: Doctrine\ORM\PersistentCollection {#121787 …}
  }
]

App\Twig\Components\ProductMostRecent {#121960
  +product: App\Entity\Product\Product {#121794
    #id: 8522
    #code: "IEEE00000610"
    #attributes: Doctrine\ORM\PersistentCollection {#121774 …}
    #variants: Doctrine\ORM\PersistentCollection {#121772 …}
    #options: Doctrine\ORM\PersistentCollection {#121767 …}
    #associations: Doctrine\ORM\PersistentCollection {#121769 …}
    #createdAt: DateTime @1751037488 {#121765
      date: 2025-06-27 17:18:08.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121800
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#121785 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#121878
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121794}
        #id: 29097
        #name: "IEEE 398:1972 (R2006)"
        #slug: "ieee-398-1972-r2006-ieee00000610-240174"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Tests for measuring the pulse-height, spurious-pulse, and pulse-timing characteristics of photomultipliers used in scintillation and Cerenkov counters are presented. Five different measurement techniques are described. They are rise-time measurements, fall-time measurements, photocathode transit-time difference measurements, and transit-time spread measurements.<br />\n
          \t\t\t\t<br />\n
          The photomultiplier is an essential component in scintillation and Cerenkov counting. In these applications there are special requirements with regard to pulse-height characteristics, spurious pulses, and timing.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121782 …}
    #channels: Doctrine\ORM\PersistentCollection {#121776 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#121780 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#121778 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121791 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121751
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1580338800 {#121799
      date: 2020-01-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @85791600 {#121758
      date: 1972-09-20 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1143669600 {#121771
      date: 2006-03-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#121792
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "398"
    -bookCollection: ""
    -pageCount: 125
    -documents: Doctrine\ORM\PersistentCollection {#121789 …}
    -favorites: Doctrine\ORM\PersistentCollection {#121787 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}