Symfony Profiler

[
  "product" => App\Entity\Product\Product {#7310
    #id: 11609
    #code: "IEEE00006368"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039833 {#7274
      date: 2025-06-27 17:57:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 41445
        #name: "IEEE 275:1966"
        #slug: "ieee-275-1966-ieee00006368-243261"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          A wide variety of synthetic electrical insulating materials are available for application in electric machinery and apparatus. Included in these materials are the silicones, fluorocarbons, wire enamels, new films, rubbers and varnishes. As there is a growing tendency to either rely solely on these materials as electrical insulation, or to employ them with the old familiar materials in novel combinations, there is a corresponding increase in the problems associated with the selection and evaluation of insulations. Frequently an insulation system or combination of insulation materials must be evaluated rather than one insulating material. Many of the specifications regulating the use of insulation materials were written before the advent of the newer synthetics and were based upon experience gained with the old materials over a long period of time. Difficulties arise, thereefore, when an effort is made to classify these new materials or combinations for insulation purposes under the USA Standards as Class A, Class B, Class F or Class H insulations. This Test Procedure has been prepared to outline useful procedures for the evaluation of systems of insulation for form-wound rotating electric machines. It is expected that the several insulating materials, or components, making up any insulation system to be tested will first be screened in accordance with specific test procedures for each type of material.<br />\n
          The chief purpose of this Test Procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is to classify according to the recognized A, B, F and H categories, whose usual continuous hotspot temperatures are 105°C, 130°C, 155°C and 180°C respectively.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for A-C Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated at 50 to 2000 horsepower 35 to 1500 Kilowatts mechanical output and below 6600 volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-128998800 {#7318
      date: 1965-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 8
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#93007
  +product: App\Entity\Product\Product {#7310
    #id: 11609
    #code: "IEEE00006368"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039833 {#7274
      date: 2025-06-27 17:57:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 41445
        #name: "IEEE 275:1966"
        #slug: "ieee-275-1966-ieee00006368-243261"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          A wide variety of synthetic electrical insulating materials are available for application in electric machinery and apparatus. Included in these materials are the silicones, fluorocarbons, wire enamels, new films, rubbers and varnishes. As there is a growing tendency to either rely solely on these materials as electrical insulation, or to employ them with the old familiar materials in novel combinations, there is a corresponding increase in the problems associated with the selection and evaluation of insulations. Frequently an insulation system or combination of insulation materials must be evaluated rather than one insulating material. Many of the specifications regulating the use of insulation materials were written before the advent of the newer synthetics and were based upon experience gained with the old materials over a long period of time. Difficulties arise, thereefore, when an effort is made to classify these new materials or combinations for insulation purposes under the USA Standards as Class A, Class B, Class F or Class H insulations. This Test Procedure has been prepared to outline useful procedures for the evaluation of systems of insulation for form-wound rotating electric machines. It is expected that the several insulating materials, or components, making up any insulation system to be tested will first be screened in accordance with specific test procedures for each type of material.<br />\n
          The chief purpose of this Test Procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is to classify according to the recognized A, B, F and H categories, whose usual continuous hotspot temperatures are 105°C, 130°C, 155°C and 180°C respectively.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for A-C Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated at 50 to 2000 horsepower 35 to 1500 Kilowatts mechanical output and below 6600 volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-128998800 {#7318
      date: 1965-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 8
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 11609
    #code: "IEEE00006368"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039833 {#7274
      date: 2025-06-27 17:57:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 41445
        #name: "IEEE 275:1966"
        #slug: "ieee-275-1966-ieee00006368-243261"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          A wide variety of synthetic electrical insulating materials are available for application in electric machinery and apparatus. Included in these materials are the silicones, fluorocarbons, wire enamels, new films, rubbers and varnishes. As there is a growing tendency to either rely solely on these materials as electrical insulation, or to employ them with the old familiar materials in novel combinations, there is a corresponding increase in the problems associated with the selection and evaluation of insulations. Frequently an insulation system or combination of insulation materials must be evaluated rather than one insulating material. Many of the specifications regulating the use of insulation materials were written before the advent of the newer synthetics and were based upon experience gained with the old materials over a long period of time. Difficulties arise, thereefore, when an effort is made to classify these new materials or combinations for insulation purposes under the USA Standards as Class A, Class B, Class F or Class H insulations. This Test Procedure has been prepared to outline useful procedures for the evaluation of systems of insulation for form-wound rotating electric machines. It is expected that the several insulating materials, or components, making up any insulation system to be tested will first be screened in accordance with specific test procedures for each type of material.<br />\n
          The chief purpose of this Test Procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is to classify according to the recognized A, B, F and H categories, whose usual continuous hotspot temperatures are 105°C, 130°C, 155°C and 180°C respectively.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for A-C Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated at 50 to 2000 horsepower 35 to 1500 Kilowatts mechanical output and below 6600 volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-128998800 {#7318
      date: 1965-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 8
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]

App\Twig\Components\ProductType {#93187
  +product: App\Entity\Product\Product {#7310
    #id: 11609
    #code: "IEEE00006368"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039833 {#7274
      date: 2025-06-27 17:57:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 41445
        #name: "IEEE 275:1966"
        #slug: "ieee-275-1966-ieee00006368-243261"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          A wide variety of synthetic electrical insulating materials are available for application in electric machinery and apparatus. Included in these materials are the silicones, fluorocarbons, wire enamels, new films, rubbers and varnishes. As there is a growing tendency to either rely solely on these materials as electrical insulation, or to employ them with the old familiar materials in novel combinations, there is a corresponding increase in the problems associated with the selection and evaluation of insulations. Frequently an insulation system or combination of insulation materials must be evaluated rather than one insulating material. Many of the specifications regulating the use of insulation materials were written before the advent of the newer synthetics and were based upon experience gained with the old materials over a long period of time. Difficulties arise, thereefore, when an effort is made to classify these new materials or combinations for insulation purposes under the USA Standards as Class A, Class B, Class F or Class H insulations. This Test Procedure has been prepared to outline useful procedures for the evaluation of systems of insulation for form-wound rotating electric machines. It is expected that the several insulating materials, or components, making up any insulation system to be tested will first be screened in accordance with specific test procedures for each type of material.<br />\n
          The chief purpose of this Test Procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is to classify according to the recognized A, B, F and H categories, whose usual continuous hotspot temperatures are 105°C, 130°C, 155°C and 180°C respectively.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for A-C Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated at 50 to 2000 horsepower 35 to 1500 Kilowatts mechanical output and below 6600 volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-128998800 {#7318
      date: 1965-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 8
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Standard"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 11609
    #code: "IEEE00006368"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039833 {#7274
      date: 2025-06-27 17:57:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 41445
        #name: "IEEE 275:1966"
        #slug: "ieee-275-1966-ieee00006368-243261"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          A wide variety of synthetic electrical insulating materials are available for application in electric machinery and apparatus. Included in these materials are the silicones, fluorocarbons, wire enamels, new films, rubbers and varnishes. As there is a growing tendency to either rely solely on these materials as electrical insulation, or to employ them with the old familiar materials in novel combinations, there is a corresponding increase in the problems associated with the selection and evaluation of insulations. Frequently an insulation system or combination of insulation materials must be evaluated rather than one insulating material. Many of the specifications regulating the use of insulation materials were written before the advent of the newer synthetics and were based upon experience gained with the old materials over a long period of time. Difficulties arise, thereefore, when an effort is made to classify these new materials or combinations for insulation purposes under the USA Standards as Class A, Class B, Class F or Class H insulations. This Test Procedure has been prepared to outline useful procedures for the evaluation of systems of insulation for form-wound rotating electric machines. It is expected that the several insulating materials, or components, making up any insulation system to be tested will first be screened in accordance with specific test procedures for each type of material.<br />\n
          The chief purpose of this Test Procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is to classify according to the recognized A, B, F and H categories, whose usual continuous hotspot temperatures are 105°C, 130°C, 155°C and 180°C respectively.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for A-C Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated at 50 to 2000 horsepower 35 to 1500 Kilowatts mechanical output and below 6600 volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-128998800 {#7318
      date: 1965-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 8
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]

App\Twig\Components\ProductMostRecent {#93262
  +product: App\Entity\Product\Product {#7310
    #id: 11609
    #code: "IEEE00006368"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039833 {#7274
      date: 2025-06-27 17:57:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 41445
        #name: "IEEE 275:1966"
        #slug: "ieee-275-1966-ieee00006368-243261"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          A wide variety of synthetic electrical insulating materials are available for application in electric machinery and apparatus. Included in these materials are the silicones, fluorocarbons, wire enamels, new films, rubbers and varnishes. As there is a growing tendency to either rely solely on these materials as electrical insulation, or to employ them with the old familiar materials in novel combinations, there is a corresponding increase in the problems associated with the selection and evaluation of insulations. Frequently an insulation system or combination of insulation materials must be evaluated rather than one insulating material. Many of the specifications regulating the use of insulation materials were written before the advent of the newer synthetics and were based upon experience gained with the old materials over a long period of time. Difficulties arise, thereefore, when an effort is made to classify these new materials or combinations for insulation purposes under the USA Standards as Class A, Class B, Class F or Class H insulations. This Test Procedure has been prepared to outline useful procedures for the evaluation of systems of insulation for form-wound rotating electric machines. It is expected that the several insulating materials, or components, making up any insulation system to be tested will first be screened in accordance with specific test procedures for each type of material.<br />\n
          The chief purpose of this Test Procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is to classify according to the recognized A, B, F and H categories, whose usual continuous hotspot temperatures are 105°C, 130°C, 155°C and 180°C respectively.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for A-C Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated at 50 to 2000 horsepower 35 to 1500 Kilowatts mechanical output and below 6600 volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-128998800 {#7318
      date: 1965-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 8
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106823
    #id: 11713
    #code: "IEEE00006473"
    #attributes: Doctrine\ORM\PersistentCollection {#106806 …}
    #variants: Doctrine\ORM\PersistentCollection {#106803 …}
    #options: Doctrine\ORM\PersistentCollection {#106799 …}
    #associations: Doctrine\ORM\PersistentCollection {#106801 …}
    #createdAt: DateTime @1751039920 {#106831
      date: 2025-06-27 17:58:40.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#106804
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106817 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106856
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106823}
        #id: 41861
        #name: "IEEE/AIEE 511:1956"
        #slug: "ieee-aiee-511-1956-ieee00006473-243365"
        #description: """
           - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          The chief purpose of this test procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is, first, to classify according to the recognized A, B and H categories, whose usual continuous hot-spot temperatures are 105, 130 and 180C, respectively. Second, to ascertain whether it is appropriate to change the present hot-spot temperatures for certain applications. It is not the intention to use this procedure at present to define any new or intermediate insulation classes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "AIEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for Electric Machinery Employing Form-Wound Pre-insulated Coils for Machines Rated at 50-2000 horsepower and below 6600 Volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106814 …}
    #channels: Doctrine\ORM\PersistentCollection {#106808 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106812 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106810 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106824 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106791
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106830
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-418266000 {#106829
      date: 1956-09-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "511"
    -bookCollection: ""
    -pageCount: 10
    -documents: Doctrine\ORM\PersistentCollection {#106821 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106819 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#106839
  +product: App\Entity\Product\Product {#106823
    #id: 11713
    #code: "IEEE00006473"
    #attributes: Doctrine\ORM\PersistentCollection {#106806 …}
    #variants: Doctrine\ORM\PersistentCollection {#106803 …}
    #options: Doctrine\ORM\PersistentCollection {#106799 …}
    #associations: Doctrine\ORM\PersistentCollection {#106801 …}
    #createdAt: DateTime @1751039920 {#106831
      date: 2025-06-27 17:58:40.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#106804
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106817 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106856
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106823}
        #id: 41861
        #name: "IEEE/AIEE 511:1956"
        #slug: "ieee-aiee-511-1956-ieee00006473-243365"
        #description: """
           - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          The chief purpose of this test procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is, first, to classify according to the recognized A, B and H categories, whose usual continuous hot-spot temperatures are 105, 130 and 180C, respectively. Second, to ascertain whether it is appropriate to change the present hot-spot temperatures for certain applications. It is not the intention to use this procedure at present to define any new or intermediate insulation classes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "AIEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for Electric Machinery Employing Form-Wound Pre-insulated Coils for Machines Rated at 50-2000 horsepower and below 6600 Volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106814 …}
    #channels: Doctrine\ORM\PersistentCollection {#106808 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106812 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106810 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106824 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106791
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106830
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-418266000 {#106829
      date: 1956-09-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "511"
    -bookCollection: ""
    -pageCount: 10
    -documents: Doctrine\ORM\PersistentCollection {#106821 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106819 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106823
    #id: 11713
    #code: "IEEE00006473"
    #attributes: Doctrine\ORM\PersistentCollection {#106806 …}
    #variants: Doctrine\ORM\PersistentCollection {#106803 …}
    #options: Doctrine\ORM\PersistentCollection {#106799 …}
    #associations: Doctrine\ORM\PersistentCollection {#106801 …}
    #createdAt: DateTime @1751039920 {#106831
      date: 2025-06-27 17:58:40.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#106804
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106817 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106856
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106823}
        #id: 41861
        #name: "IEEE/AIEE 511:1956"
        #slug: "ieee-aiee-511-1956-ieee00006473-243365"
        #description: """
           - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          The chief purpose of this test procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is, first, to classify according to the recognized A, B and H categories, whose usual continuous hot-spot temperatures are 105, 130 and 180C, respectively. Second, to ascertain whether it is appropriate to change the present hot-spot temperatures for certain applications. It is not the intention to use this procedure at present to define any new or intermediate insulation classes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "AIEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for Electric Machinery Employing Form-Wound Pre-insulated Coils for Machines Rated at 50-2000 horsepower and below 6600 Volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106814 …}
    #channels: Doctrine\ORM\PersistentCollection {#106808 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106812 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106810 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106824 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106791
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106830
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-418266000 {#106829
      date: 1956-09-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "511"
    -bookCollection: ""
    -pageCount: 10
    -documents: Doctrine\ORM\PersistentCollection {#106821 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106819 …}
  }
]

App\Twig\Components\ProductMostRecent {#106938
  +product: App\Entity\Product\Product {#106823
    #id: 11713
    #code: "IEEE00006473"
    #attributes: Doctrine\ORM\PersistentCollection {#106806 …}
    #variants: Doctrine\ORM\PersistentCollection {#106803 …}
    #options: Doctrine\ORM\PersistentCollection {#106799 …}
    #associations: Doctrine\ORM\PersistentCollection {#106801 …}
    #createdAt: DateTime @1751039920 {#106831
      date: 2025-06-27 17:58:40.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#106804
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106817 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106856
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106823}
        #id: 41861
        #name: "IEEE/AIEE 511:1956"
        #slug: "ieee-aiee-511-1956-ieee00006473-243365"
        #description: """
           - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          The chief purpose of this test procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is, first, to classify according to the recognized A, B and H categories, whose usual continuous hot-spot temperatures are 105, 130 and 180C, respectively. Second, to ascertain whether it is appropriate to change the present hot-spot temperatures for certain applications. It is not the intention to use this procedure at present to define any new or intermediate insulation classes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "AIEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for Electric Machinery Employing Form-Wound Pre-insulated Coils for Machines Rated at 50-2000 horsepower and below 6600 Volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106814 …}
    #channels: Doctrine\ORM\PersistentCollection {#106808 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106812 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106810 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106824 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106791
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106830
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-418266000 {#106829
      date: 1956-09-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "511"
    -bookCollection: ""
    -pageCount: 10
    -documents: Doctrine\ORM\PersistentCollection {#106821 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106819 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#93683
    #id: 8434
    #code: "IEEE00000464"
    #attributes: Doctrine\ORM\PersistentCollection {#93664 …}
    #variants: Doctrine\ORM\PersistentCollection {#93662 …}
    #options: Doctrine\ORM\PersistentCollection {#93724 …}
    #associations: Doctrine\ORM\PersistentCollection {#93660 …}
    #createdAt: DateTime @1751037413 {#93693
      date: 2025-06-27 17:16:53.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#93672
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93676 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93716
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93683}
        #id: 28745
        #name: "IEEE 275:1992 (R1998)"
        #slug: "ieee-275-1992-r1998-ieee00000464-240086"
        #description: """
          Revision Standard - Inactive-Withdrawn.<br />\n
          A test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature is described. The procedure is limited to insulation systems for ac electric machines using form-wound preinsulated stator coils and rated 6900 V and below. This procedure is intended to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines that are enclosed in gas atmospheres, or that are subjected to strong chemicals, to metal dust, or to submersion in liquids, etc. The procedure includes instructions for testing candidate systems in comparison with known systems having a proven record of service experience and interpretation of the results.<br />\n
          \t\t\t\t<br />\n
          This standard outlines a test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature. The procedure is limited to insulation systems for ac electric machines using formwound preinsulated stator coils and rated 6900 V and below.<br />\n
          It is the intent of this procedure to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines that are enclosed in gas atmospheres, or that are subjected to strong chemicals, to metal dusts, or to submersion in liquids, etc.<br />\n
          The procedure includes instructions for testing candidate systems in comparison with known systems having a proven record of service experience and interpretation of the results.<br />\n
          The purpose of this procedure is to classify insulation systems for the machinery within the scope of this standard in accordance with their temperature limits by test, rather than by chemical composition. Data from such tests may be used to establish the temperature classification of new insulation systems before they are service proven.<br />\n
          Service-proven systems shall also be tested according to this test procedure.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Thermal Evaluation of Insulation Systems for Alternating-Current Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated 6900 V and Below"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93674 …}
    #channels: Doctrine\ORM\PersistentCollection {#93667 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93671 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93669 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93682 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93656
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#93692
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @717980400 {#93691
      date: 1992-10-02 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @905896800 {#93685
      date: 1998-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1074207600 {#93686
      date: 2004-01-16 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#93680 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93678 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#113579
  +product: App\Entity\Product\Product {#93683
    #id: 8434
    #code: "IEEE00000464"
    #attributes: Doctrine\ORM\PersistentCollection {#93664 …}
    #variants: Doctrine\ORM\PersistentCollection {#93662 …}
    #options: Doctrine\ORM\PersistentCollection {#93724 …}
    #associations: Doctrine\ORM\PersistentCollection {#93660 …}
    #createdAt: DateTime @1751037413 {#93693
      date: 2025-06-27 17:16:53.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#93672
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93676 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93716
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93683}
        #id: 28745
        #name: "IEEE 275:1992 (R1998)"
        #slug: "ieee-275-1992-r1998-ieee00000464-240086"
        #description: """
          Revision Standard - Inactive-Withdrawn.<br />\n
          A test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature is described. The procedure is limited to insulation systems for ac electric machines using form-wound preinsulated stator coils and rated 6900 V and below. This procedure is intended to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines that are enclosed in gas atmospheres, or that are subjected to strong chemicals, to metal dust, or to submersion in liquids, etc. The procedure includes instructions for testing candidate systems in comparison with known systems having a proven record of service experience and interpretation of the results.<br />\n
          \t\t\t\t<br />\n
          This standard outlines a test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature. The procedure is limited to insulation systems for ac electric machines using formwound preinsulated stator coils and rated 6900 V and below.<br />\n
          It is the intent of this procedure to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines that are enclosed in gas atmospheres, or that are subjected to strong chemicals, to metal dusts, or to submersion in liquids, etc.<br />\n
          The procedure includes instructions for testing candidate systems in comparison with known systems having a proven record of service experience and interpretation of the results.<br />\n
          The purpose of this procedure is to classify insulation systems for the machinery within the scope of this standard in accordance with their temperature limits by test, rather than by chemical composition. Data from such tests may be used to establish the temperature classification of new insulation systems before they are service proven.<br />\n
          Service-proven systems shall also be tested according to this test procedure.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Thermal Evaluation of Insulation Systems for Alternating-Current Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated 6900 V and Below"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93674 …}
    #channels: Doctrine\ORM\PersistentCollection {#93667 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93671 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93669 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93682 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93656
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#93692
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @717980400 {#93691
      date: 1992-10-02 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @905896800 {#93685
      date: 1998-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1074207600 {#93686
      date: 2004-01-16 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#93680 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93678 …}
  }
  +appearance: "state-withdrawn"
  +labels: [
    "Withdrawn"
    "Confirmed"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#93683
    #id: 8434
    #code: "IEEE00000464"
    #attributes: Doctrine\ORM\PersistentCollection {#93664 …}
    #variants: Doctrine\ORM\PersistentCollection {#93662 …}
    #options: Doctrine\ORM\PersistentCollection {#93724 …}
    #associations: Doctrine\ORM\PersistentCollection {#93660 …}
    #createdAt: DateTime @1751037413 {#93693
      date: 2025-06-27 17:16:53.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#93672
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93676 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93716
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93683}
        #id: 28745
        #name: "IEEE 275:1992 (R1998)"
        #slug: "ieee-275-1992-r1998-ieee00000464-240086"
        #description: """
          Revision Standard - Inactive-Withdrawn.<br />\n
          A test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature is described. The procedure is limited to insulation systems for ac electric machines using form-wound preinsulated stator coils and rated 6900 V and below. This procedure is intended to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines that are enclosed in gas atmospheres, or that are subjected to strong chemicals, to metal dust, or to submersion in liquids, etc. The procedure includes instructions for testing candidate systems in comparison with known systems having a proven record of service experience and interpretation of the results.<br />\n
          \t\t\t\t<br />\n
          This standard outlines a test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature. The procedure is limited to insulation systems for ac electric machines using formwound preinsulated stator coils and rated 6900 V and below.<br />\n
          It is the intent of this procedure to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines that are enclosed in gas atmospheres, or that are subjected to strong chemicals, to metal dusts, or to submersion in liquids, etc.<br />\n
          The procedure includes instructions for testing candidate systems in comparison with known systems having a proven record of service experience and interpretation of the results.<br />\n
          The purpose of this procedure is to classify insulation systems for the machinery within the scope of this standard in accordance with their temperature limits by test, rather than by chemical composition. Data from such tests may be used to establish the temperature classification of new insulation systems before they are service proven.<br />\n
          Service-proven systems shall also be tested according to this test procedure.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Thermal Evaluation of Insulation Systems for Alternating-Current Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated 6900 V and Below"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93674 …}
    #channels: Doctrine\ORM\PersistentCollection {#93667 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93671 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93669 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93682 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93656
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#93692
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @717980400 {#93691
      date: 1992-10-02 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @905896800 {#93685
      date: 1998-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1074207600 {#93686
      date: 2004-01-16 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#93680 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93678 …}
  }
]

App\Twig\Components\ProductMostRecent {#113650
  +product: App\Entity\Product\Product {#93683
    #id: 8434
    #code: "IEEE00000464"
    #attributes: Doctrine\ORM\PersistentCollection {#93664 …}
    #variants: Doctrine\ORM\PersistentCollection {#93662 …}
    #options: Doctrine\ORM\PersistentCollection {#93724 …}
    #associations: Doctrine\ORM\PersistentCollection {#93660 …}
    #createdAt: DateTime @1751037413 {#93693
      date: 2025-06-27 17:16:53.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#93672
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93676 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93716
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93683}
        #id: 28745
        #name: "IEEE 275:1992 (R1998)"
        #slug: "ieee-275-1992-r1998-ieee00000464-240086"
        #description: """
          Revision Standard - Inactive-Withdrawn.<br />\n
          A test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature is described. The procedure is limited to insulation systems for ac electric machines using form-wound preinsulated stator coils and rated 6900 V and below. This procedure is intended to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines that are enclosed in gas atmospheres, or that are subjected to strong chemicals, to metal dust, or to submersion in liquids, etc. The procedure includes instructions for testing candidate systems in comparison with known systems having a proven record of service experience and interpretation of the results.<br />\n
          \t\t\t\t<br />\n
          This standard outlines a test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature. The procedure is limited to insulation systems for ac electric machines using formwound preinsulated stator coils and rated 6900 V and below.<br />\n
          It is the intent of this procedure to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines that are enclosed in gas atmospheres, or that are subjected to strong chemicals, to metal dusts, or to submersion in liquids, etc.<br />\n
          The procedure includes instructions for testing candidate systems in comparison with known systems having a proven record of service experience and interpretation of the results.<br />\n
          The purpose of this procedure is to classify insulation systems for the machinery within the scope of this standard in accordance with their temperature limits by test, rather than by chemical composition. Data from such tests may be used to establish the temperature classification of new insulation systems before they are service proven.<br />\n
          Service-proven systems shall also be tested according to this test procedure.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Thermal Evaluation of Insulation Systems for Alternating-Current Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated 6900 V and Below"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93674 …}
    #channels: Doctrine\ORM\PersistentCollection {#93667 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93671 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93669 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93682 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93656
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#93692
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @717980400 {#93691
      date: 1992-10-02 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @905896800 {#93685
      date: 1998-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1074207600 {#93686
      date: 2004-01-16 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#93680 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93678 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#113497
    #id: 8433
    #code: "IEEE00000463"
    #attributes: Doctrine\ORM\PersistentCollection {#113532 …}
    #variants: Doctrine\ORM\PersistentCollection {#113534 …}
    #options: Doctrine\ORM\PersistentCollection {#113538 …}
    #associations: Doctrine\ORM\PersistentCollection {#113536 …}
    #createdAt: DateTime @1751037412 {#113509
      date: 2025-06-27 17:16:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#113508
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#113522 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#113717
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#113497}
        #id: 28741
        #name: "IEEE 275:1981"
        #slug: "ieee-275-1981-ieee00000463-240085"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          This standard outlines a test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature. The procedure is limited to insulation systems for alternating-current electrical machines using form-wound pre-insulated stator coils and rated 6900 V and below. It is the intent of this procedure to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines enclosed in gas atmospheres, subjected to strong chemicals, to metal dusts, or to submersion in liquids, etc. The procedure includes instructions for testing candidate systems in comparison with known systems having a proven record of service experience and interpretation of the results.<br />\n
          The purpose of this procedure is to classify insulation systems for the machinery within the scope of this standard in accordance with their temperature limits by test, rather than by chemical composition. Data from such tests may be used to establish the temperature classification of new insulation systems before they are service proven. Service proven systems must also be tested according to this test procedure.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Thermal Evaluation of Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils, Machines Rated 6900 V and Below"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#113524 …}
    #channels: Doctrine\ORM\PersistentCollection {#113530 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#113526 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#113528 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#113516 …}
    -apiLastModifiedAt: DateTime @1754517600 {#113506
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#113504
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @358725600 {#113507
      date: 1981-05-15 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @691887600 {#113500
      date: 1991-12-05 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 12
    -documents: Doctrine\ORM\PersistentCollection {#113518 …}
    -favorites: Doctrine\ORM\PersistentCollection {#113520 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#113732
  +product: App\Entity\Product\Product {#113497
    #id: 8433
    #code: "IEEE00000463"
    #attributes: Doctrine\ORM\PersistentCollection {#113532 …}
    #variants: Doctrine\ORM\PersistentCollection {#113534 …}
    #options: Doctrine\ORM\PersistentCollection {#113538 …}
    #associations: Doctrine\ORM\PersistentCollection {#113536 …}
    #createdAt: DateTime @1751037412 {#113509
      date: 2025-06-27 17:16:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#113508
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#113522 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#113717
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#113497}
        #id: 28741
        #name: "IEEE 275:1981"
        #slug: "ieee-275-1981-ieee00000463-240085"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          This standard outlines a test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature. The procedure is limited to insulation systems for alternating-current electrical machines using form-wound pre-insulated stator coils and rated 6900 V and below. It is the intent of this procedure to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines enclosed in gas atmospheres, subjected to strong chemicals, to metal dusts, or to submersion in liquids, etc. The procedure includes instructions for testing candidate systems in comparison with known systems having a proven record of service experience and interpretation of the results.<br />\n
          The purpose of this procedure is to classify insulation systems for the machinery within the scope of this standard in accordance with their temperature limits by test, rather than by chemical composition. Data from such tests may be used to establish the temperature classification of new insulation systems before they are service proven. Service proven systems must also be tested according to this test procedure.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Thermal Evaluation of Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils, Machines Rated 6900 V and Below"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#113524 …}
    #channels: Doctrine\ORM\PersistentCollection {#113530 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#113526 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#113528 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#113516 …}
    -apiLastModifiedAt: DateTime @1754517600 {#113506
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#113504
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @358725600 {#113507
      date: 1981-05-15 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @691887600 {#113500
      date: 1991-12-05 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 12
    -documents: Doctrine\ORM\PersistentCollection {#113518 …}
    -favorites: Doctrine\ORM\PersistentCollection {#113520 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#113497
    #id: 8433
    #code: "IEEE00000463"
    #attributes: Doctrine\ORM\PersistentCollection {#113532 …}
    #variants: Doctrine\ORM\PersistentCollection {#113534 …}
    #options: Doctrine\ORM\PersistentCollection {#113538 …}
    #associations: Doctrine\ORM\PersistentCollection {#113536 …}
    #createdAt: DateTime @1751037412 {#113509
      date: 2025-06-27 17:16:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#113508
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#113522 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#113717
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#113497}
        #id: 28741
        #name: "IEEE 275:1981"
        #slug: "ieee-275-1981-ieee00000463-240085"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          This standard outlines a test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature. The procedure is limited to insulation systems for alternating-current electrical machines using form-wound pre-insulated stator coils and rated 6900 V and below. It is the intent of this procedure to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines enclosed in gas atmospheres, subjected to strong chemicals, to metal dusts, or to submersion in liquids, etc. The procedure includes instructions for testing candidate systems in comparison with known systems having a proven record of service experience and interpretation of the results.<br />\n
          The purpose of this procedure is to classify insulation systems for the machinery within the scope of this standard in accordance with their temperature limits by test, rather than by chemical composition. Data from such tests may be used to establish the temperature classification of new insulation systems before they are service proven. Service proven systems must also be tested according to this test procedure.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Thermal Evaluation of Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils, Machines Rated 6900 V and Below"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#113524 …}
    #channels: Doctrine\ORM\PersistentCollection {#113530 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#113526 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#113528 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#113516 …}
    -apiLastModifiedAt: DateTime @1754517600 {#113506
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#113504
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @358725600 {#113507
      date: 1981-05-15 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @691887600 {#113500
      date: 1991-12-05 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 12
    -documents: Doctrine\ORM\PersistentCollection {#113518 …}
    -favorites: Doctrine\ORM\PersistentCollection {#113520 …}
  }
]

App\Twig\Components\ProductMostRecent {#113784
  +product: App\Entity\Product\Product {#113497
    #id: 8433
    #code: "IEEE00000463"
    #attributes: Doctrine\ORM\PersistentCollection {#113532 …}
    #variants: Doctrine\ORM\PersistentCollection {#113534 …}
    #options: Doctrine\ORM\PersistentCollection {#113538 …}
    #associations: Doctrine\ORM\PersistentCollection {#113536 …}
    #createdAt: DateTime @1751037412 {#113509
      date: 2025-06-27 17:16:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#113508
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#113522 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#113717
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#113497}
        #id: 28741
        #name: "IEEE 275:1981"
        #slug: "ieee-275-1981-ieee00000463-240085"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          This standard outlines a test procedure for comparing two or more insulation systems in accordance with their expected life at rated temperature. The procedure is limited to insulation systems for alternating-current electrical machines using form-wound pre-insulated stator coils and rated 6900 V and below. It is the intent of this procedure to evaluate insulation systems for use in usual service conditions with air cooling. It does not cover such special requirements as machines enclosed in gas atmospheres, subjected to strong chemicals, to metal dusts, or to submersion in liquids, etc. The procedure includes instructions for testing candidate systems in comparison with known systems having a proven record of service experience and interpretation of the results.<br />\n
          The purpose of this procedure is to classify insulation systems for the machinery within the scope of this standard in accordance with their temperature limits by test, rather than by chemical composition. Data from such tests may be used to establish the temperature classification of new insulation systems before they are service proven. Service proven systems must also be tested according to this test procedure.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Thermal Evaluation of Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils, Machines Rated 6900 V and Below"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#113524 …}
    #channels: Doctrine\ORM\PersistentCollection {#113530 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#113526 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#113528 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#113516 …}
    -apiLastModifiedAt: DateTime @1754517600 {#113506
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#113504
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @358725600 {#113507
      date: 1981-05-15 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @691887600 {#113500
      date: 1991-12-05 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 12
    -documents: Doctrine\ORM\PersistentCollection {#113518 …}
    -favorites: Doctrine\ORM\PersistentCollection {#113520 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 11609
    #code: "IEEE00006368"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039833 {#7274
      date: 2025-06-27 17:57:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 41445
        #name: "IEEE 275:1966"
        #slug: "ieee-275-1966-ieee00006368-243261"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          A wide variety of synthetic electrical insulating materials are available for application in electric machinery and apparatus. Included in these materials are the silicones, fluorocarbons, wire enamels, new films, rubbers and varnishes. As there is a growing tendency to either rely solely on these materials as electrical insulation, or to employ them with the old familiar materials in novel combinations, there is a corresponding increase in the problems associated with the selection and evaluation of insulations. Frequently an insulation system or combination of insulation materials must be evaluated rather than one insulating material. Many of the specifications regulating the use of insulation materials were written before the advent of the newer synthetics and were based upon experience gained with the old materials over a long period of time. Difficulties arise, thereefore, when an effort is made to classify these new materials or combinations for insulation purposes under the USA Standards as Class A, Class B, Class F or Class H insulations. This Test Procedure has been prepared to outline useful procedures for the evaluation of systems of insulation for form-wound rotating electric machines. It is expected that the several insulating materials, or components, making up any insulation system to be tested will first be screened in accordance with specific test procedures for each type of material.<br />\n
          The chief purpose of this Test Procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is to classify according to the recognized A, B, F and H categories, whose usual continuous hotspot temperatures are 105°C, 130°C, 155°C and 180°C respectively.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for A-C Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated at 50 to 2000 horsepower 35 to 1500 Kilowatts mechanical output and below 6600 volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-128998800 {#7318
      date: 1965-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 8
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#113848
  +product: App\Entity\Product\Product {#7310
    #id: 11609
    #code: "IEEE00006368"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039833 {#7274
      date: 2025-06-27 17:57:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 41445
        #name: "IEEE 275:1966"
        #slug: "ieee-275-1966-ieee00006368-243261"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          A wide variety of synthetic electrical insulating materials are available for application in electric machinery and apparatus. Included in these materials are the silicones, fluorocarbons, wire enamels, new films, rubbers and varnishes. As there is a growing tendency to either rely solely on these materials as electrical insulation, or to employ them with the old familiar materials in novel combinations, there is a corresponding increase in the problems associated with the selection and evaluation of insulations. Frequently an insulation system or combination of insulation materials must be evaluated rather than one insulating material. Many of the specifications regulating the use of insulation materials were written before the advent of the newer synthetics and were based upon experience gained with the old materials over a long period of time. Difficulties arise, thereefore, when an effort is made to classify these new materials or combinations for insulation purposes under the USA Standards as Class A, Class B, Class F or Class H insulations. This Test Procedure has been prepared to outline useful procedures for the evaluation of systems of insulation for form-wound rotating electric machines. It is expected that the several insulating materials, or components, making up any insulation system to be tested will first be screened in accordance with specific test procedures for each type of material.<br />\n
          The chief purpose of this Test Procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is to classify according to the recognized A, B, F and H categories, whose usual continuous hotspot temperatures are 105°C, 130°C, 155°C and 180°C respectively.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for A-C Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated at 50 to 2000 horsepower 35 to 1500 Kilowatts mechanical output and below 6600 volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-128998800 {#7318
      date: 1965-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 8
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 11609
    #code: "IEEE00006368"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039833 {#7274
      date: 2025-06-27 17:57:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 41445
        #name: "IEEE 275:1966"
        #slug: "ieee-275-1966-ieee00006368-243261"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          A wide variety of synthetic electrical insulating materials are available for application in electric machinery and apparatus. Included in these materials are the silicones, fluorocarbons, wire enamels, new films, rubbers and varnishes. As there is a growing tendency to either rely solely on these materials as electrical insulation, or to employ them with the old familiar materials in novel combinations, there is a corresponding increase in the problems associated with the selection and evaluation of insulations. Frequently an insulation system or combination of insulation materials must be evaluated rather than one insulating material. Many of the specifications regulating the use of insulation materials were written before the advent of the newer synthetics and were based upon experience gained with the old materials over a long period of time. Difficulties arise, thereefore, when an effort is made to classify these new materials or combinations for insulation purposes under the USA Standards as Class A, Class B, Class F or Class H insulations. This Test Procedure has been prepared to outline useful procedures for the evaluation of systems of insulation for form-wound rotating electric machines. It is expected that the several insulating materials, or components, making up any insulation system to be tested will first be screened in accordance with specific test procedures for each type of material.<br />\n
          The chief purpose of this Test Procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is to classify according to the recognized A, B, F and H categories, whose usual continuous hotspot temperatures are 105°C, 130°C, 155°C and 180°C respectively.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for A-C Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated at 50 to 2000 horsepower 35 to 1500 Kilowatts mechanical output and below 6600 volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-128998800 {#7318
      date: 1965-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 8
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]

App\Twig\Components\ProductMostRecent {#113875
  +product: App\Entity\Product\Product {#7310
    #id: 11609
    #code: "IEEE00006368"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039833 {#7274
      date: 2025-06-27 17:57:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 41445
        #name: "IEEE 275:1966"
        #slug: "ieee-275-1966-ieee00006368-243261"
        #description: """
          Revision Standard - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          A wide variety of synthetic electrical insulating materials are available for application in electric machinery and apparatus. Included in these materials are the silicones, fluorocarbons, wire enamels, new films, rubbers and varnishes. As there is a growing tendency to either rely solely on these materials as electrical insulation, or to employ them with the old familiar materials in novel combinations, there is a corresponding increase in the problems associated with the selection and evaluation of insulations. Frequently an insulation system or combination of insulation materials must be evaluated rather than one insulating material. Many of the specifications regulating the use of insulation materials were written before the advent of the newer synthetics and were based upon experience gained with the old materials over a long period of time. Difficulties arise, thereefore, when an effort is made to classify these new materials or combinations for insulation purposes under the USA Standards as Class A, Class B, Class F or Class H insulations. This Test Procedure has been prepared to outline useful procedures for the evaluation of systems of insulation for form-wound rotating electric machines. It is expected that the several insulating materials, or components, making up any insulation system to be tested will first be screened in accordance with specific test procedures for each type of material.<br />\n
          The chief purpose of this Test Procedure is to classify insulation systems in accordance with their temperature limits by test, rather than by chemical composition. The intention is to classify according to the recognized A, B, F and H categories, whose usual continuous hotspot temperatures are 105°C, 130°C, 155°C and 180°C respectively.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Proposed Test Procedure for Evaluation of Systems of Insulating Materials for A-C Electric Machinery Employing Form-Wound Preinsulated Stator Coils for Machines Rated at 50 to 2000 horsepower 35 to 1500 Kilowatts mechanical output and below 6600 volts"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-128998800 {#7318
      date: 1965-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "275"
    -bookCollection: ""
    -pageCount: 8
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}