Symfony Profiler

[
  "product" => App\Entity\Product\Product {#7311
    #id: 12811
    #code: "IEEE00010722"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751040676 {#7274
      date: 2025-06-27 18:11:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#7322
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 46253
        #name: "IEEE C37.20.6:2024"
        #slug: "ieee-c37-20-6-2024-ieee00010722-244467"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 48.3 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 48.3 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows: a) Simple manual devices b) Complex manual devices c) Simple electrical devices d) Complex electrical devices There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not within the scope of this standard. This standard can be used to provide guidance in their development but additional testing and interlocking may be required.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard for 4.76 kV to 48.3 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1740351600 {#7292
      date: 2025-02-24 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1727215200 {#7318
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1727215200 {#7316
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#93055
  +product: App\Entity\Product\Product {#7311
    #id: 12811
    #code: "IEEE00010722"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751040676 {#7274
      date: 2025-06-27 18:11:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#7322
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 46253
        #name: "IEEE C37.20.6:2024"
        #slug: "ieee-c37-20-6-2024-ieee00010722-244467"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 48.3 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 48.3 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows: a) Simple manual devices b) Complex manual devices c) Simple electrical devices d) Complex electrical devices There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not within the scope of this standard. This standard can be used to provide guidance in their development but additional testing and interlocking may be required.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard for 4.76 kV to 48.3 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1740351600 {#7292
      date: 2025-02-24 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1727215200 {#7318
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1727215200 {#7316
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7311
    #id: 12811
    #code: "IEEE00010722"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751040676 {#7274
      date: 2025-06-27 18:11:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#7322
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 46253
        #name: "IEEE C37.20.6:2024"
        #slug: "ieee-c37-20-6-2024-ieee00010722-244467"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 48.3 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 48.3 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows: a) Simple manual devices b) Complex manual devices c) Simple electrical devices d) Complex electrical devices There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not within the scope of this standard. This standard can be used to provide guidance in their development but additional testing and interlocking may be required.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard for 4.76 kV to 48.3 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1740351600 {#7292
      date: 2025-02-24 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1727215200 {#7318
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1727215200 {#7316
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]

App\Twig\Components\ProductType {#93235
  +product: App\Entity\Product\Product {#7311
    #id: 12811
    #code: "IEEE00010722"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751040676 {#7274
      date: 2025-06-27 18:11:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#7322
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 46253
        #name: "IEEE C37.20.6:2024"
        #slug: "ieee-c37-20-6-2024-ieee00010722-244467"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 48.3 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 48.3 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows: a) Simple manual devices b) Complex manual devices c) Simple electrical devices d) Complex electrical devices There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not within the scope of this standard. This standard can be used to provide guidance in their development but additional testing and interlocking may be required.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard for 4.76 kV to 48.3 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1740351600 {#7292
      date: 2025-02-24 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1727215200 {#7318
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1727215200 {#7316
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Standard"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7311
    #id: 12811
    #code: "IEEE00010722"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751040676 {#7274
      date: 2025-06-27 18:11:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#7322
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 46253
        #name: "IEEE C37.20.6:2024"
        #slug: "ieee-c37-20-6-2024-ieee00010722-244467"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 48.3 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 48.3 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows: a) Simple manual devices b) Complex manual devices c) Simple electrical devices d) Complex electrical devices There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not within the scope of this standard. This standard can be used to provide guidance in their development but additional testing and interlocking may be required.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard for 4.76 kV to 48.3 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1740351600 {#7292
      date: 2025-02-24 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1727215200 {#7318
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1727215200 {#7316
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]

App\Twig\Components\ProductMostRecent {#93310
  +product: App\Entity\Product\Product {#7311
    #id: 12811
    #code: "IEEE00010722"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751040676 {#7274
      date: 2025-06-27 18:11:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#7322
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 46253
        #name: "IEEE C37.20.6:2024"
        #slug: "ieee-c37-20-6-2024-ieee00010722-244467"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 48.3 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 48.3 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows: a) Simple manual devices b) Complex manual devices c) Simple electrical devices d) Complex electrical devices There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not within the scope of this standard. This standard can be used to provide guidance in their development but additional testing and interlocking may be required.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard for 4.76 kV to 48.3 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1740351600 {#7292
      date: 2025-02-24 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1727215200 {#7318
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1727215200 {#7316
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#100318
    #id: 11316
    #code: "IEEE00005909"
    #attributes: Doctrine\ORM\PersistentCollection {#100299 …}
    #variants: Doctrine\ORM\PersistentCollection {#100296 …}
    #options: Doctrine\ORM\PersistentCollection {#100292 …}
    #associations: Doctrine\ORM\PersistentCollection {#100294 …}
    #createdAt: DateTime @1751039627 {#100325
      date: 2025-06-27 17:53:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#100298
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100309 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100331
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100318}
        #id: 40273
        #name: "IEEE C37.20.6:2015"
        #slug: "ieee-c37-20-6-2015-ieee00005909-242968"
        #description: """
          Revision Standard - Active.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 38 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Complex manual devices<br />\n
          c) Simple electrical devices<br />\n
          d) Complex electrical devices<br />\n
          There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required, and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100307 …}
    #channels: Doctrine\ORM\PersistentCollection {#100301 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100305 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100303 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100316 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100285
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1727128800 {#100324
      date: 2024-09-24 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1428616800 {#100323
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1428616800 {#100317
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 36
    -documents: Doctrine\ORM\PersistentCollection {#100314 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100312 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#100380
  +product: App\Entity\Product\Product {#100318
    #id: 11316
    #code: "IEEE00005909"
    #attributes: Doctrine\ORM\PersistentCollection {#100299 …}
    #variants: Doctrine\ORM\PersistentCollection {#100296 …}
    #options: Doctrine\ORM\PersistentCollection {#100292 …}
    #associations: Doctrine\ORM\PersistentCollection {#100294 …}
    #createdAt: DateTime @1751039627 {#100325
      date: 2025-06-27 17:53:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#100298
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100309 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100331
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100318}
        #id: 40273
        #name: "IEEE C37.20.6:2015"
        #slug: "ieee-c37-20-6-2015-ieee00005909-242968"
        #description: """
          Revision Standard - Active.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 38 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Complex manual devices<br />\n
          c) Simple electrical devices<br />\n
          d) Complex electrical devices<br />\n
          There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required, and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100307 …}
    #channels: Doctrine\ORM\PersistentCollection {#100301 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100305 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100303 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100316 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100285
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1727128800 {#100324
      date: 2024-09-24 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1428616800 {#100323
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1428616800 {#100317
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 36
    -documents: Doctrine\ORM\PersistentCollection {#100314 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100312 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#100318
    #id: 11316
    #code: "IEEE00005909"
    #attributes: Doctrine\ORM\PersistentCollection {#100299 …}
    #variants: Doctrine\ORM\PersistentCollection {#100296 …}
    #options: Doctrine\ORM\PersistentCollection {#100292 …}
    #associations: Doctrine\ORM\PersistentCollection {#100294 …}
    #createdAt: DateTime @1751039627 {#100325
      date: 2025-06-27 17:53:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#100298
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100309 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100331
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100318}
        #id: 40273
        #name: "IEEE C37.20.6:2015"
        #slug: "ieee-c37-20-6-2015-ieee00005909-242968"
        #description: """
          Revision Standard - Active.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 38 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Complex manual devices<br />\n
          c) Simple electrical devices<br />\n
          d) Complex electrical devices<br />\n
          There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required, and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100307 …}
    #channels: Doctrine\ORM\PersistentCollection {#100301 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100305 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100303 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100316 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100285
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1727128800 {#100324
      date: 2024-09-24 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1428616800 {#100323
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1428616800 {#100317
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 36
    -documents: Doctrine\ORM\PersistentCollection {#100314 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100312 …}
  }
]

App\Twig\Components\ProductMostRecent {#100447
  +product: App\Entity\Product\Product {#100318
    #id: 11316
    #code: "IEEE00005909"
    #attributes: Doctrine\ORM\PersistentCollection {#100299 …}
    #variants: Doctrine\ORM\PersistentCollection {#100296 …}
    #options: Doctrine\ORM\PersistentCollection {#100292 …}
    #associations: Doctrine\ORM\PersistentCollection {#100294 …}
    #createdAt: DateTime @1751039627 {#100325
      date: 2025-06-27 17:53:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#100298
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100309 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100331
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100318}
        #id: 40273
        #name: "IEEE C37.20.6:2015"
        #slug: "ieee-c37-20-6-2015-ieee00005909-242968"
        #description: """
          Revision Standard - Active.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 38 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Complex manual devices<br />\n
          c) Simple electrical devices<br />\n
          d) Complex electrical devices<br />\n
          There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required, and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100307 …}
    #channels: Doctrine\ORM\PersistentCollection {#100301 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100305 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100303 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100316 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100285
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1727128800 {#100324
      date: 2024-09-24 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1428616800 {#100323
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1428616800 {#100317
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 36
    -documents: Doctrine\ORM\PersistentCollection {#100314 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100312 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7311
    #id: 12811
    #code: "IEEE00010722"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751040676 {#7274
      date: 2025-06-27 18:11:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#7322
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 46253
        #name: "IEEE C37.20.6:2024"
        #slug: "ieee-c37-20-6-2024-ieee00010722-244467"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 48.3 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 48.3 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows: a) Simple manual devices b) Complex manual devices c) Simple electrical devices d) Complex electrical devices There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not within the scope of this standard. This standard can be used to provide guidance in their development but additional testing and interlocking may be required.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard for 4.76 kV to 48.3 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1740351600 {#7292
      date: 2025-02-24 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1727215200 {#7318
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1727215200 {#7316
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107098
  +product: App\Entity\Product\Product {#7311
    #id: 12811
    #code: "IEEE00010722"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751040676 {#7274
      date: 2025-06-27 18:11:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#7322
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 46253
        #name: "IEEE C37.20.6:2024"
        #slug: "ieee-c37-20-6-2024-ieee00010722-244467"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 48.3 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 48.3 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows: a) Simple manual devices b) Complex manual devices c) Simple electrical devices d) Complex electrical devices There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not within the scope of this standard. This standard can be used to provide guidance in their development but additional testing and interlocking may be required.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard for 4.76 kV to 48.3 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1740351600 {#7292
      date: 2025-02-24 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1727215200 {#7318
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1727215200 {#7316
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7311
    #id: 12811
    #code: "IEEE00010722"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751040676 {#7274
      date: 2025-06-27 18:11:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#7322
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 46253
        #name: "IEEE C37.20.6:2024"
        #slug: "ieee-c37-20-6-2024-ieee00010722-244467"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 48.3 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 48.3 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows: a) Simple manual devices b) Complex manual devices c) Simple electrical devices d) Complex electrical devices There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not within the scope of this standard. This standard can be used to provide guidance in their development but additional testing and interlocking may be required.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard for 4.76 kV to 48.3 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1740351600 {#7292
      date: 2025-02-24 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1727215200 {#7318
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1727215200 {#7316
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]

App\Twig\Components\ProductMostRecent {#107140
  +product: App\Entity\Product\Product {#7311
    #id: 12811
    #code: "IEEE00010722"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751040676 {#7274
      date: 2025-06-27 18:11:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#7322
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 46253
        #name: "IEEE C37.20.6:2024"
        #slug: "ieee-c37-20-6-2024-ieee00010722-244467"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 48.3 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 48.3 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows: a) Simple manual devices b) Complex manual devices c) Simple electrical devices d) Complex electrical devices There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not within the scope of this standard. This standard can be used to provide guidance in their development but additional testing and interlocking may be required.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard for 4.76 kV to 48.3 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1740351600 {#7292
      date: 2025-02-24 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1727215200 {#7318
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1727215200 {#7316
      date: 2024-09-25 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#100318
    #id: 11316
    #code: "IEEE00005909"
    #attributes: Doctrine\ORM\PersistentCollection {#100299 …}
    #variants: Doctrine\ORM\PersistentCollection {#100296 …}
    #options: Doctrine\ORM\PersistentCollection {#100292 …}
    #associations: Doctrine\ORM\PersistentCollection {#100294 …}
    #createdAt: DateTime @1751039627 {#100325
      date: 2025-06-27 17:53:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#100298
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100309 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100331
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100318}
        #id: 40273
        #name: "IEEE C37.20.6:2015"
        #slug: "ieee-c37-20-6-2015-ieee00005909-242968"
        #description: """
          Revision Standard - Active.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 38 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Complex manual devices<br />\n
          c) Simple electrical devices<br />\n
          d) Complex electrical devices<br />\n
          There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required, and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100307 …}
    #channels: Doctrine\ORM\PersistentCollection {#100301 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100305 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100303 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100316 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100285
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1727128800 {#100324
      date: 2024-09-24 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1428616800 {#100323
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1428616800 {#100317
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 36
    -documents: Doctrine\ORM\PersistentCollection {#100314 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100312 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107205
  +product: App\Entity\Product\Product {#100318
    #id: 11316
    #code: "IEEE00005909"
    #attributes: Doctrine\ORM\PersistentCollection {#100299 …}
    #variants: Doctrine\ORM\PersistentCollection {#100296 …}
    #options: Doctrine\ORM\PersistentCollection {#100292 …}
    #associations: Doctrine\ORM\PersistentCollection {#100294 …}
    #createdAt: DateTime @1751039627 {#100325
      date: 2025-06-27 17:53:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#100298
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100309 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100331
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100318}
        #id: 40273
        #name: "IEEE C37.20.6:2015"
        #slug: "ieee-c37-20-6-2015-ieee00005909-242968"
        #description: """
          Revision Standard - Active.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 38 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Complex manual devices<br />\n
          c) Simple electrical devices<br />\n
          d) Complex electrical devices<br />\n
          There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required, and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100307 …}
    #channels: Doctrine\ORM\PersistentCollection {#100301 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100305 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100303 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100316 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100285
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1727128800 {#100324
      date: 2024-09-24 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1428616800 {#100323
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1428616800 {#100317
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 36
    -documents: Doctrine\ORM\PersistentCollection {#100314 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100312 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#100318
    #id: 11316
    #code: "IEEE00005909"
    #attributes: Doctrine\ORM\PersistentCollection {#100299 …}
    #variants: Doctrine\ORM\PersistentCollection {#100296 …}
    #options: Doctrine\ORM\PersistentCollection {#100292 …}
    #associations: Doctrine\ORM\PersistentCollection {#100294 …}
    #createdAt: DateTime @1751039627 {#100325
      date: 2025-06-27 17:53:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#100298
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100309 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100331
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100318}
        #id: 40273
        #name: "IEEE C37.20.6:2015"
        #slug: "ieee-c37-20-6-2015-ieee00005909-242968"
        #description: """
          Revision Standard - Active.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 38 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Complex manual devices<br />\n
          c) Simple electrical devices<br />\n
          d) Complex electrical devices<br />\n
          There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required, and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100307 …}
    #channels: Doctrine\ORM\PersistentCollection {#100301 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100305 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100303 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100316 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100285
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1727128800 {#100324
      date: 2024-09-24 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1428616800 {#100323
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1428616800 {#100317
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 36
    -documents: Doctrine\ORM\PersistentCollection {#100314 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100312 …}
  }
]

App\Twig\Components\ProductMostRecent {#107232
  +product: App\Entity\Product\Product {#100318
    #id: 11316
    #code: "IEEE00005909"
    #attributes: Doctrine\ORM\PersistentCollection {#100299 …}
    #variants: Doctrine\ORM\PersistentCollection {#100296 …}
    #options: Doctrine\ORM\PersistentCollection {#100292 …}
    #associations: Doctrine\ORM\PersistentCollection {#100294 …}
    #createdAt: DateTime @1751039627 {#100325
      date: 2025-06-27 17:53:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#100298
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100309 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100331
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100318}
        #id: 40273
        #name: "IEEE C37.20.6:2015"
        #slug: "ieee-c37-20-6-2015-ieee00005909-242968"
        #description: """
          Revision Standard - Active.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in drawout metal-clad switchgear rated 4.76 kV through 38 kV as described in IEEE Std C37.20.2(TM). Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Complex manual devices<br />\n
          c) Simple electrical devices<br />\n
          d) Complex electrical devices<br />\n
          There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glow tubes, or other accessory components. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required, and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they were not addressed in the standards until IEEE Std C37.20.6™-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits. It also recognizes that some devices may be offered with interrupting capabilities, and required tests for such devices are specified.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100307 …}
    #channels: Doctrine\ORM\PersistentCollection {#100301 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100305 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100303 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100316 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100285
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1727128800 {#100324
      date: 2024-09-24 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1428616800 {#100323
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1428616800 {#100317
      date: 2015-04-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 36
    -documents: Doctrine\ORM\PersistentCollection {#100314 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100312 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#107019
    #id: 10207
    #code: "IEEE00003893"
    #attributes: Doctrine\ORM\PersistentCollection {#107035 …}
    #variants: Doctrine\ORM\PersistentCollection {#107037 …}
    #options: Doctrine\ORM\PersistentCollection {#107041 …}
    #associations: Doctrine\ORM\PersistentCollection {#107039 …}
    #createdAt: DateTime @1751038897 {#107011
      date: 2025-06-27 17:41:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#107008
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107025 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107298
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107019}
        #id: 35837
        #name: "IEEE C37.20.6:2007"
        #slug: "ieee-c37-20-6-2007-ieee00003893-241859"
        #description: """
          Revision Standard - Superseded.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in<br />\n
          drawout metal-clad switchgear rated 4.76 kV through 38 kV as described in IEEE Std C37.20.2-1999.1<br />\n
          Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Complex manual devices<br />\n
          c) Simple electrical devices<br />\n
          d) Complex electrical devices<br />\n
          There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glowtubes,or other accessory components. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required, and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they<br />\n
          were not addressed in the standards until IEEE Std C37.20.6(TM)-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2-1999 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107027 …}
    #channels: Doctrine\ORM\PersistentCollection {#107033 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107029 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107031 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107018 …}
    -apiLastModifiedAt: DateTime @1754517600 {#107010
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#107012
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1205794800 {#107013
      date: 2008-03-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 30
    -documents: Doctrine\ORM\PersistentCollection {#107021 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107023 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107313
  +product: App\Entity\Product\Product {#107019
    #id: 10207
    #code: "IEEE00003893"
    #attributes: Doctrine\ORM\PersistentCollection {#107035 …}
    #variants: Doctrine\ORM\PersistentCollection {#107037 …}
    #options: Doctrine\ORM\PersistentCollection {#107041 …}
    #associations: Doctrine\ORM\PersistentCollection {#107039 …}
    #createdAt: DateTime @1751038897 {#107011
      date: 2025-06-27 17:41:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#107008
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107025 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107298
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107019}
        #id: 35837
        #name: "IEEE C37.20.6:2007"
        #slug: "ieee-c37-20-6-2007-ieee00003893-241859"
        #description: """
          Revision Standard - Superseded.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in<br />\n
          drawout metal-clad switchgear rated 4.76 kV through 38 kV as described in IEEE Std C37.20.2-1999.1<br />\n
          Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Complex manual devices<br />\n
          c) Simple electrical devices<br />\n
          d) Complex electrical devices<br />\n
          There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glowtubes,or other accessory components. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required, and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they<br />\n
          were not addressed in the standards until IEEE Std C37.20.6(TM)-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2-1999 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107027 …}
    #channels: Doctrine\ORM\PersistentCollection {#107033 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107029 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107031 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107018 …}
    -apiLastModifiedAt: DateTime @1754517600 {#107010
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#107012
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1205794800 {#107013
      date: 2008-03-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 30
    -documents: Doctrine\ORM\PersistentCollection {#107021 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107023 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#107019
    #id: 10207
    #code: "IEEE00003893"
    #attributes: Doctrine\ORM\PersistentCollection {#107035 …}
    #variants: Doctrine\ORM\PersistentCollection {#107037 …}
    #options: Doctrine\ORM\PersistentCollection {#107041 …}
    #associations: Doctrine\ORM\PersistentCollection {#107039 …}
    #createdAt: DateTime @1751038897 {#107011
      date: 2025-06-27 17:41:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#107008
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107025 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107298
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107019}
        #id: 35837
        #name: "IEEE C37.20.6:2007"
        #slug: "ieee-c37-20-6-2007-ieee00003893-241859"
        #description: """
          Revision Standard - Superseded.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in<br />\n
          drawout metal-clad switchgear rated 4.76 kV through 38 kV as described in IEEE Std C37.20.2-1999.1<br />\n
          Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Complex manual devices<br />\n
          c) Simple electrical devices<br />\n
          d) Complex electrical devices<br />\n
          There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glowtubes,or other accessory components. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required, and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they<br />\n
          were not addressed in the standards until IEEE Std C37.20.6(TM)-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2-1999 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107027 …}
    #channels: Doctrine\ORM\PersistentCollection {#107033 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107029 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107031 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107018 …}
    -apiLastModifiedAt: DateTime @1754517600 {#107010
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#107012
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1205794800 {#107013
      date: 2008-03-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 30
    -documents: Doctrine\ORM\PersistentCollection {#107021 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107023 …}
  }
]

App\Twig\Components\ProductMostRecent {#107365
  +product: App\Entity\Product\Product {#107019
    #id: 10207
    #code: "IEEE00003893"
    #attributes: Doctrine\ORM\PersistentCollection {#107035 …}
    #variants: Doctrine\ORM\PersistentCollection {#107037 …}
    #options: Doctrine\ORM\PersistentCollection {#107041 …}
    #associations: Doctrine\ORM\PersistentCollection {#107039 …}
    #createdAt: DateTime @1751038897 {#107011
      date: 2025-06-27 17:41:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#107008
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107025 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107298
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107019}
        #id: 35837
        #name: "IEEE C37.20.6:2007"
        #slug: "ieee-c37-20-6-2007-ieee00003893-241859"
        #description: """
          Revision Standard - Superseded.<br />\n
          Drawout-type ground and test devices for use in medium-voltage metal-clad switchgear rated 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout-type, indoor, medium-voltage ground and test (G&amp;T) devices for use in<br />\n
          drawout metal-clad switchgear rated 4.76 kV through 38 kV as described in IEEE Std C37.20.2-1999.1<br />\n
          Four G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Complex manual devices<br />\n
          c) Simple electrical devices<br />\n
          d) Complex electrical devices<br />\n
          There may be more complicated G&amp;T devices that may include current and/or voltage transformers, glowtubes,or other accessory components. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required, and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Although G&amp;T devices have been used as accessory devices in metal-clad switchgear for decades, they<br />\n
          were not addressed in the standards until IEEE Std C37.20.6(TM)-1997 was approved. This is because they are specialized accessory devices, designed and tested in accordance with applicable sections of circuit breaker standards, and based on user-unique operational requirements. This revised standard complements IEEE Std C37.20.2-1999 and addresses the more common G&amp;T device types. This standard also clarifies that G&amp;T devices are not required to have the interrupting and continuous current ratings of the circuit breakers they may temporarily replace for the purpose of grounding and testing medium-voltage circuits.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107027 …}
    #channels: Doctrine\ORM\PersistentCollection {#107033 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107029 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107031 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107018 …}
    -apiLastModifiedAt: DateTime @1754517600 {#107010
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#107012
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1205794800 {#107013
      date: 2008-03-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 30
    -documents: Doctrine\ORM\PersistentCollection {#107021 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107023 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#107049
    #id: 9524
    #code: "IEEE00002503"
    #attributes: Doctrine\ORM\PersistentCollection {#107066 …}
    #variants: Doctrine\ORM\PersistentCollection {#107068 …}
    #options: Doctrine\ORM\PersistentCollection {#107072 …}
    #associations: Doctrine\ORM\PersistentCollection {#107070 …}
    #createdAt: DateTime @1751038334 {#107043
      date: 2025-06-27 17:32:14.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#107044
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107056 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107431
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107049}
        #id: 33105
        #name: "IEEE C37.20.6:1997 (R2003)"
        #slug: "ieee-c37-20-6-1997-r2003-ieee00002503-241176"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Drawout type grounding and testing (G&amp;T) devices for use in medium-voltage metal-clad switchgear rated above 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout type, indoor medium-voltage grounding and testing (G&amp;T) devices for use in drawout metal-clad switchgear rated above 4.76 kV through 38 kV as described in IEEE Std C37.20.2-1993. Three G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Simple electrical devices<br />\n
          c) Complex electrical devices<br />\n
          There may be more complex G&amp;T devices that may include current and/or voltage transformers, glow-tubes, or other accessory components and may also have the ability to interrupt short-circuit current. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Ground and test devices are not presently covered by standards.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices Used in Enclosures"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107058 …}
    #channels: Doctrine\ORM\PersistentCollection {#107064 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107060 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107062 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107050 …}
    -apiLastModifiedAt: DateTime @1754517600 {#107045
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#107046
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @849308400 {#107047
      date: 1996-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1055368800 {#107048
      date: 2003-06-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#107052 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107054 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107446
  +product: App\Entity\Product\Product {#107049
    #id: 9524
    #code: "IEEE00002503"
    #attributes: Doctrine\ORM\PersistentCollection {#107066 …}
    #variants: Doctrine\ORM\PersistentCollection {#107068 …}
    #options: Doctrine\ORM\PersistentCollection {#107072 …}
    #associations: Doctrine\ORM\PersistentCollection {#107070 …}
    #createdAt: DateTime @1751038334 {#107043
      date: 2025-06-27 17:32:14.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#107044
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107056 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107431
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107049}
        #id: 33105
        #name: "IEEE C37.20.6:1997 (R2003)"
        #slug: "ieee-c37-20-6-1997-r2003-ieee00002503-241176"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Drawout type grounding and testing (G&amp;T) devices for use in medium-voltage metal-clad switchgear rated above 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout type, indoor medium-voltage grounding and testing (G&amp;T) devices for use in drawout metal-clad switchgear rated above 4.76 kV through 38 kV as described in IEEE Std C37.20.2-1993. Three G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Simple electrical devices<br />\n
          c) Complex electrical devices<br />\n
          There may be more complex G&amp;T devices that may include current and/or voltage transformers, glow-tubes, or other accessory components and may also have the ability to interrupt short-circuit current. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Ground and test devices are not presently covered by standards.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices Used in Enclosures"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107058 …}
    #channels: Doctrine\ORM\PersistentCollection {#107064 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107060 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107062 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107050 …}
    -apiLastModifiedAt: DateTime @1754517600 {#107045
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#107046
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @849308400 {#107047
      date: 1996-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1055368800 {#107048
      date: 2003-06-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#107052 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107054 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
    "Confirmed"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#107049
    #id: 9524
    #code: "IEEE00002503"
    #attributes: Doctrine\ORM\PersistentCollection {#107066 …}
    #variants: Doctrine\ORM\PersistentCollection {#107068 …}
    #options: Doctrine\ORM\PersistentCollection {#107072 …}
    #associations: Doctrine\ORM\PersistentCollection {#107070 …}
    #createdAt: DateTime @1751038334 {#107043
      date: 2025-06-27 17:32:14.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#107044
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107056 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107431
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107049}
        #id: 33105
        #name: "IEEE C37.20.6:1997 (R2003)"
        #slug: "ieee-c37-20-6-1997-r2003-ieee00002503-241176"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Drawout type grounding and testing (G&amp;T) devices for use in medium-voltage metal-clad switchgear rated above 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout type, indoor medium-voltage grounding and testing (G&amp;T) devices for use in drawout metal-clad switchgear rated above 4.76 kV through 38 kV as described in IEEE Std C37.20.2-1993. Three G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Simple electrical devices<br />\n
          c) Complex electrical devices<br />\n
          There may be more complex G&amp;T devices that may include current and/or voltage transformers, glow-tubes, or other accessory components and may also have the ability to interrupt short-circuit current. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Ground and test devices are not presently covered by standards.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices Used in Enclosures"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107058 …}
    #channels: Doctrine\ORM\PersistentCollection {#107064 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107060 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107062 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107050 …}
    -apiLastModifiedAt: DateTime @1754517600 {#107045
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#107046
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @849308400 {#107047
      date: 1996-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1055368800 {#107048
      date: 2003-06-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#107052 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107054 …}
  }
]

App\Twig\Components\ProductMostRecent {#107502
  +product: App\Entity\Product\Product {#107049
    #id: 9524
    #code: "IEEE00002503"
    #attributes: Doctrine\ORM\PersistentCollection {#107066 …}
    #variants: Doctrine\ORM\PersistentCollection {#107068 …}
    #options: Doctrine\ORM\PersistentCollection {#107072 …}
    #associations: Doctrine\ORM\PersistentCollection {#107070 …}
    #createdAt: DateTime @1751038334 {#107043
      date: 2025-06-27 17:32:14.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#107044
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107056 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107431
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107049}
        #id: 33105
        #name: "IEEE C37.20.6:1997 (R2003)"
        #slug: "ieee-c37-20-6-1997-r2003-ieee00002503-241176"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Drawout type grounding and testing (G&amp;T) devices for use in medium-voltage metal-clad switchgear rated above 4.76 kV through 38 kV are covered. The description, design, and testing of these accessory devices that are inserted in place of drawout circuit breakers for the purpose of grounding and testing are also covered.<br />\n
          \t\t\t\t<br />\n
          This standard covers drawout type, indoor medium-voltage grounding and testing (G&amp;T) devices for use in drawout metal-clad switchgear rated above 4.76 kV through 38 kV as described in IEEE Std C37.20.2-1993. Three G&amp;T device types are generally supplied for temporary circuit maintenance procedures for insertion in place of the circuit breaker as follows:<br />\n
          a) Simple manual devices<br />\n
          b) Simple electrical devices<br />\n
          c) Complex electrical devices<br />\n
          There may be more complex G&amp;T devices that may include current and/or voltage transformers, glow-tubes, or other accessory components and may also have the ability to interrupt short-circuit current. These more complex devices are not covered by this standard. Due to their complexity, additional testing and interlocking are required and manufacturers should be consulted for the availability and ratings of these types of devices.<br />\n
          Ground and test devices are not presently covered by standards.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices Used in Enclosures"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107058 …}
    #channels: Doctrine\ORM\PersistentCollection {#107064 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107060 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107062 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107050 …}
    -apiLastModifiedAt: DateTime @1754517600 {#107045
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#107046
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @849308400 {#107047
      date: 1996-11-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1055368800 {#107048
      date: 2003-06-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.20.6"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#107052 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107054 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#129019
    #id: 10659
    #code: "IEEE00004777"
    #attributes: Doctrine\ORM\PersistentCollection {#129002 …}
    #variants: Doctrine\ORM\PersistentCollection {#129000 …}
    #options: Doctrine\ORM\PersistentCollection {#128995 …}
    #associations: Doctrine\ORM\PersistentCollection {#128997 …}
    #createdAt: DateTime @1751039202 {#128992
      date: 2025-06-27 17:46:42.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#129027
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#129013 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#129115
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#129019}
        #id: 37645
        #name: "IEEE 4:2013"
        #slug: "ieee-4-2013-ieee00004777-242311"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Standard methods and basic techniques for high-voltage testing applicable to all types of apparatus for alternating voltages, direct voltages, lightning impulse voltages, switching impulse voltages, and impulse currents are established in this standard. Sections that deal with alternating voltage, direct voltage, and impulse testing are combined in this revision to organize the technical content for ease of use. In addition, the concept of measurement uncertainty in evaluation of high-voltage and high-current tests is introduced in this version.<br />\n
          \t\t\t\t<br />\n
          This standard is applicable to - Dielectric tests with direct voltages - Dielectric tests with alternating voltages - Dielectric tests with impulse voltages - Tests with impulse currents - Tests with combinations of the above - Capacitance and dielectric loss measurements This standard is applicable only to tests on equipment with a rated voltage above 1000 V. Procedures are given for applying correction factors to convert test data to standard atmospheric conditions. This standard also specifies procedures for testing equipment when external insulation of the test object is to be subjected to dry, wet, or contaminated conditions.<br />\n
          The purpose of this standard is to<br />\n
          - Define terms of general applicability<br />\n
          - Present general requirements regarding test equipment and procedures<br />\n
          - Describe methods for evaluation of test results
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for High-Voltage Testing Techniques"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#129011 …}
    #channels: Doctrine\ORM\PersistentCollection {#129004 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#129008 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#129006 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#129021 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128978
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1712786400 {#129026
      date: 2024-04-11 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1368136800 {#128985
      date: 2013-05-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1710975600 {#128998
      date: 2024-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "4"
    -bookCollection: ""
    -pageCount: 213
    -documents: Doctrine\ORM\PersistentCollection {#129017 …}
    -favorites: Doctrine\ORM\PersistentCollection {#129015 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "additionalClasses" => "product__teaser--with-grey-border"
  "hasStretchedLink" => true
  "hoverType" => "shadow"
  "linkLabel" => "See more"
]

App\Twig\Components\ProductCard {#129075
  +product: App\Entity\Product\Product {#129019
    #id: 10659
    #code: "IEEE00004777"
    #attributes: Doctrine\ORM\PersistentCollection {#129002 …}
    #variants: Doctrine\ORM\PersistentCollection {#129000 …}
    #options: Doctrine\ORM\PersistentCollection {#128995 …}
    #associations: Doctrine\ORM\PersistentCollection {#128997 …}
    #createdAt: DateTime @1751039202 {#128992
      date: 2025-06-27 17:46:42.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#129027
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#129013 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#129115
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#129019}
        #id: 37645
        #name: "IEEE 4:2013"
        #slug: "ieee-4-2013-ieee00004777-242311"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Standard methods and basic techniques for high-voltage testing applicable to all types of apparatus for alternating voltages, direct voltages, lightning impulse voltages, switching impulse voltages, and impulse currents are established in this standard. Sections that deal with alternating voltage, direct voltage, and impulse testing are combined in this revision to organize the technical content for ease of use. In addition, the concept of measurement uncertainty in evaluation of high-voltage and high-current tests is introduced in this version.<br />\n
          \t\t\t\t<br />\n
          This standard is applicable to - Dielectric tests with direct voltages - Dielectric tests with alternating voltages - Dielectric tests with impulse voltages - Tests with impulse currents - Tests with combinations of the above - Capacitance and dielectric loss measurements This standard is applicable only to tests on equipment with a rated voltage above 1000 V. Procedures are given for applying correction factors to convert test data to standard atmospheric conditions. This standard also specifies procedures for testing equipment when external insulation of the test object is to be subjected to dry, wet, or contaminated conditions.<br />\n
          The purpose of this standard is to<br />\n
          - Define terms of general applicability<br />\n
          - Present general requirements regarding test equipment and procedures<br />\n
          - Describe methods for evaluation of test results
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for High-Voltage Testing Techniques"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#129011 …}
    #channels: Doctrine\ORM\PersistentCollection {#129004 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#129008 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#129006 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#129021 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128978
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1712786400 {#129026
      date: 2024-04-11 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1368136800 {#128985
      date: 2013-05-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1710975600 {#128998
      date: 2024-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "4"
    -bookCollection: ""
    -pageCount: 213
    -documents: Doctrine\ORM\PersistentCollection {#129017 …}
    -favorites: Doctrine\ORM\PersistentCollection {#129015 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "product__teaser--with-grey-border"
  +linkLabel: "See more"
  +imageFilter: "product_thumbnail_teaser"
  +hasStretchedLink: true
  +backgroundColor: "white"
  +hoverType: "shadow"
}

[
  "product" => App\Entity\Product\Product {#129019
    #id: 10659
    #code: "IEEE00004777"
    #attributes: Doctrine\ORM\PersistentCollection {#129002 …}
    #variants: Doctrine\ORM\PersistentCollection {#129000 …}
    #options: Doctrine\ORM\PersistentCollection {#128995 …}
    #associations: Doctrine\ORM\PersistentCollection {#128997 …}
    #createdAt: DateTime @1751039202 {#128992
      date: 2025-06-27 17:46:42.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#129027
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#129013 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#129115
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#129019}
        #id: 37645
        #name: "IEEE 4:2013"
        #slug: "ieee-4-2013-ieee00004777-242311"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Standard methods and basic techniques for high-voltage testing applicable to all types of apparatus for alternating voltages, direct voltages, lightning impulse voltages, switching impulse voltages, and impulse currents are established in this standard. Sections that deal with alternating voltage, direct voltage, and impulse testing are combined in this revision to organize the technical content for ease of use. In addition, the concept of measurement uncertainty in evaluation of high-voltage and high-current tests is introduced in this version.<br />\n
          \t\t\t\t<br />\n
          This standard is applicable to - Dielectric tests with direct voltages - Dielectric tests with alternating voltages - Dielectric tests with impulse voltages - Tests with impulse currents - Tests with combinations of the above - Capacitance and dielectric loss measurements This standard is applicable only to tests on equipment with a rated voltage above 1000 V. Procedures are given for applying correction factors to convert test data to standard atmospheric conditions. This standard also specifies procedures for testing equipment when external insulation of the test object is to be subjected to dry, wet, or contaminated conditions.<br />\n
          The purpose of this standard is to<br />\n
          - Define terms of general applicability<br />\n
          - Present general requirements regarding test equipment and procedures<br />\n
          - Describe methods for evaluation of test results
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for High-Voltage Testing Techniques"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#129011 …}
    #channels: Doctrine\ORM\PersistentCollection {#129004 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#129008 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#129006 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#129021 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128978
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1712786400 {#129026
      date: 2024-04-11 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1368136800 {#128985
      date: 2013-05-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1710975600 {#128998
      date: 2024-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "4"
    -bookCollection: ""
    -pageCount: 213
    -documents: Doctrine\ORM\PersistentCollection {#129017 …}
    -favorites: Doctrine\ORM\PersistentCollection {#129015 …}
  }
]

[
  "showFullLabel" => false
]

App\Twig\Components\ProductState {#129117
  +product: App\Entity\Product\Product {#129019
    #id: 10659
    #code: "IEEE00004777"
    #attributes: Doctrine\ORM\PersistentCollection {#129002 …}
    #variants: Doctrine\ORM\PersistentCollection {#129000 …}
    #options: Doctrine\ORM\PersistentCollection {#128995 …}
    #associations: Doctrine\ORM\PersistentCollection {#128997 …}
    #createdAt: DateTime @1751039202 {#128992
      date: 2025-06-27 17:46:42.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#129027
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#129013 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#129115
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#129019}
        #id: 37645
        #name: "IEEE 4:2013"
        #slug: "ieee-4-2013-ieee00004777-242311"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Standard methods and basic techniques for high-voltage testing applicable to all types of apparatus for alternating voltages, direct voltages, lightning impulse voltages, switching impulse voltages, and impulse currents are established in this standard. Sections that deal with alternating voltage, direct voltage, and impulse testing are combined in this revision to organize the technical content for ease of use. In addition, the concept of measurement uncertainty in evaluation of high-voltage and high-current tests is introduced in this version.<br />\n
          \t\t\t\t<br />\n
          This standard is applicable to - Dielectric tests with direct voltages - Dielectric tests with alternating voltages - Dielectric tests with impulse voltages - Tests with impulse currents - Tests with combinations of the above - Capacitance and dielectric loss measurements This standard is applicable only to tests on equipment with a rated voltage above 1000 V. Procedures are given for applying correction factors to convert test data to standard atmospheric conditions. This standard also specifies procedures for testing equipment when external insulation of the test object is to be subjected to dry, wet, or contaminated conditions.<br />\n
          The purpose of this standard is to<br />\n
          - Define terms of general applicability<br />\n
          - Present general requirements regarding test equipment and procedures<br />\n
          - Describe methods for evaluation of test results
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for High-Voltage Testing Techniques"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#129011 …}
    #channels: Doctrine\ORM\PersistentCollection {#129004 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#129008 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#129006 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#129021 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128978
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1712786400 {#129026
      date: 2024-04-11 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1368136800 {#128985
      date: 2013-05-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1710975600 {#128998
      date: 2024-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "4"
    -bookCollection: ""
    -pageCount: 213
    -documents: Doctrine\ORM\PersistentCollection {#129017 …}
    -favorites: Doctrine\ORM\PersistentCollection {#129015 …}
  }
  +appearance: "state-withdrawn"
  +labels: [
    "Withdrawn"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#129019
    #id: 10659
    #code: "IEEE00004777"
    #attributes: Doctrine\ORM\PersistentCollection {#129002 …}
    #variants: Doctrine\ORM\PersistentCollection {#129000 …}
    #options: Doctrine\ORM\PersistentCollection {#128995 …}
    #associations: Doctrine\ORM\PersistentCollection {#128997 …}
    #createdAt: DateTime @1751039202 {#128992
      date: 2025-06-27 17:46:42.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#129027
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#129013 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#129115
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#129019}
        #id: 37645
        #name: "IEEE 4:2013"
        #slug: "ieee-4-2013-ieee00004777-242311"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Standard methods and basic techniques for high-voltage testing applicable to all types of apparatus for alternating voltages, direct voltages, lightning impulse voltages, switching impulse voltages, and impulse currents are established in this standard. Sections that deal with alternating voltage, direct voltage, and impulse testing are combined in this revision to organize the technical content for ease of use. In addition, the concept of measurement uncertainty in evaluation of high-voltage and high-current tests is introduced in this version.<br />\n
          \t\t\t\t<br />\n
          This standard is applicable to - Dielectric tests with direct voltages - Dielectric tests with alternating voltages - Dielectric tests with impulse voltages - Tests with impulse currents - Tests with combinations of the above - Capacitance and dielectric loss measurements This standard is applicable only to tests on equipment with a rated voltage above 1000 V. Procedures are given for applying correction factors to convert test data to standard atmospheric conditions. This standard also specifies procedures for testing equipment when external insulation of the test object is to be subjected to dry, wet, or contaminated conditions.<br />\n
          The purpose of this standard is to<br />\n
          - Define terms of general applicability<br />\n
          - Present general requirements regarding test equipment and procedures<br />\n
          - Describe methods for evaluation of test results
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for High-Voltage Testing Techniques"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#129011 …}
    #channels: Doctrine\ORM\PersistentCollection {#129004 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#129008 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#129006 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#129021 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128978
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1712786400 {#129026
      date: 2024-04-11 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1368136800 {#128985
      date: 2013-05-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1710975600 {#128998
      date: 2024-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "4"
    -bookCollection: ""
    -pageCount: 213
    -documents: Doctrine\ORM\PersistentCollection {#129017 …}
    -favorites: Doctrine\ORM\PersistentCollection {#129015 …}
  }
]

App\Twig\Components\ProductMostRecent {#129194
  +product: App\Entity\Product\Product {#129019
    #id: 10659
    #code: "IEEE00004777"
    #attributes: Doctrine\ORM\PersistentCollection {#129002 …}
    #variants: Doctrine\ORM\PersistentCollection {#129000 …}
    #options: Doctrine\ORM\PersistentCollection {#128995 …}
    #associations: Doctrine\ORM\PersistentCollection {#128997 …}
    #createdAt: DateTime @1751039202 {#128992
      date: 2025-06-27 17:46:42.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#129027
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#129013 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#129115
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#129019}
        #id: 37645
        #name: "IEEE 4:2013"
        #slug: "ieee-4-2013-ieee00004777-242311"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Standard methods and basic techniques for high-voltage testing applicable to all types of apparatus for alternating voltages, direct voltages, lightning impulse voltages, switching impulse voltages, and impulse currents are established in this standard. Sections that deal with alternating voltage, direct voltage, and impulse testing are combined in this revision to organize the technical content for ease of use. In addition, the concept of measurement uncertainty in evaluation of high-voltage and high-current tests is introduced in this version.<br />\n
          \t\t\t\t<br />\n
          This standard is applicable to - Dielectric tests with direct voltages - Dielectric tests with alternating voltages - Dielectric tests with impulse voltages - Tests with impulse currents - Tests with combinations of the above - Capacitance and dielectric loss measurements This standard is applicable only to tests on equipment with a rated voltage above 1000 V. Procedures are given for applying correction factors to convert test data to standard atmospheric conditions. This standard also specifies procedures for testing equipment when external insulation of the test object is to be subjected to dry, wet, or contaminated conditions.<br />\n
          The purpose of this standard is to<br />\n
          - Define terms of general applicability<br />\n
          - Present general requirements regarding test equipment and procedures<br />\n
          - Describe methods for evaluation of test results
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for High-Voltage Testing Techniques"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#129011 …}
    #channels: Doctrine\ORM\PersistentCollection {#129004 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#129008 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#129006 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#129021 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128978
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1712786400 {#129026
      date: 2024-04-11 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1368136800 {#128985
      date: 2013-05-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1710975600 {#128998
      date: 2024-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "4"
    -bookCollection: ""
    -pageCount: 213
    -documents: Doctrine\ORM\PersistentCollection {#129017 …}
    -favorites: Doctrine\ORM\PersistentCollection {#129015 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}