GET https://dev.normadoc.fr/products/ieee-c37-98-2013-ieee00005436-242665

Response
200 OK
IP
216.73.216.146
Profiled on
Token
ca6ed0

Components

4 Twig Components
14 Render Count
17 ms Render Time
408.0 MiB Memory Usage

Components

Name Metadata Render Count Render Time
ProductState 
"App\Twig\Components\ProductState"
components/ProductState.html.twig 		6 3.20ms
ProductMostRecent 
"App\Twig\Components\ProductMostRecent"
components/ProductMostRecent.html.twig 		6 4.24ms
ProductType 
"App\Twig\Components\ProductType"
components/ProductType.html.twig 		1 0.55ms
ProductCard 
"App\Twig\Components\ProductCard"
components/ProductCard.html.twig 		1 9.67ms

Render calls

ProductState App\Twig\Components\ProductState 406.0 MiB 2.36 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 11013
    #code: "IEEE00005436"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039424 {#7274
      date: 2025-06-27 17:50:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 39061
        #name: "IEEE C37.98:2013"
        #slug: "ieee-c37-98-2013-ieee00005436-242665"
        #description: """
          Revision Standard - Superseded.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). This standard covers relays used in nuclear facilities, but may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEEE Std 344; fragility, proof and generic testing. To define the specific conditions for seismic testing of protective relays the following parameters shall be specified:<br />\n
          a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test.<br />\n
          b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure.<br />\n
          c) The seismic levels (required response spectra) to be imposed during the test.<br />\n
          This standard provides guidance to establish the test parameters listed above, determine seismic capacity and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and or after the specified seismic motion. In addition, this standard provides the documentation requirements necessary to demonstrate seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1694037600 {#7292
      date: 2023-09-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1398808800 {#7318
      date: 2014-04-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#93075
  +product: App\Entity\Product\Product {#7310
    #id: 11013
    #code: "IEEE00005436"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039424 {#7274
      date: 2025-06-27 17:50:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 39061
        #name: "IEEE C37.98:2013"
        #slug: "ieee-c37-98-2013-ieee00005436-242665"
        #description: """
          Revision Standard - Superseded.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). This standard covers relays used in nuclear facilities, but may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEEE Std 344; fragility, proof and generic testing. To define the specific conditions for seismic testing of protective relays the following parameters shall be specified:<br />\n
          a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test.<br />\n
          b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure.<br />\n
          c) The seismic levels (required response spectra) to be imposed during the test.<br />\n
          This standard provides guidance to establish the test parameters listed above, determine seismic capacity and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and or after the specified seismic motion. In addition, this standard provides the documentation requirements necessary to demonstrate seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1694037600 {#7292
      date: 2023-09-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1398808800 {#7318
      date: 2014-04-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductType App\Twig\Components\ProductType 406.0 MiB 0.55 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 11013
    #code: "IEEE00005436"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039424 {#7274
      date: 2025-06-27 17:50:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 39061
        #name: "IEEE C37.98:2013"
        #slug: "ieee-c37-98-2013-ieee00005436-242665"
        #description: """
          Revision Standard - Superseded.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). This standard covers relays used in nuclear facilities, but may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEEE Std 344; fragility, proof and generic testing. To define the specific conditions for seismic testing of protective relays the following parameters shall be specified:<br />\n
          a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test.<br />\n
          b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure.<br />\n
          c) The seismic levels (required response spectra) to be imposed during the test.<br />\n
          This standard provides guidance to establish the test parameters listed above, determine seismic capacity and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and or after the specified seismic motion. In addition, this standard provides the documentation requirements necessary to demonstrate seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1694037600 {#7292
      date: 2023-09-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1398808800 {#7318
      date: 2014-04-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductType {#93246
  +product: App\Entity\Product\Product {#7310
    #id: 11013
    #code: "IEEE00005436"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039424 {#7274
      date: 2025-06-27 17:50:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 39061
        #name: "IEEE C37.98:2013"
        #slug: "ieee-c37-98-2013-ieee00005436-242665"
        #description: """
          Revision Standard - Superseded.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). This standard covers relays used in nuclear facilities, but may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEEE Std 344; fragility, proof and generic testing. To define the specific conditions for seismic testing of protective relays the following parameters shall be specified:<br />\n
          a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test.<br />\n
          b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure.<br />\n
          c) The seismic levels (required response spectra) to be imposed during the test.<br />\n
          This standard provides guidance to establish the test parameters listed above, determine seismic capacity and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and or after the specified seismic motion. In addition, this standard provides the documentation requirements necessary to demonstrate seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1694037600 {#7292
      date: 2023-09-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1398808800 {#7318
      date: 2014-04-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Standard"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 406.0 MiB 1.11 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 11013
    #code: "IEEE00005436"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039424 {#7274
      date: 2025-06-27 17:50:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 39061
        #name: "IEEE C37.98:2013"
        #slug: "ieee-c37-98-2013-ieee00005436-242665"
        #description: """
          Revision Standard - Superseded.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). This standard covers relays used in nuclear facilities, but may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEEE Std 344; fragility, proof and generic testing. To define the specific conditions for seismic testing of protective relays the following parameters shall be specified:<br />\n
          a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test.<br />\n
          b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure.<br />\n
          c) The seismic levels (required response spectra) to be imposed during the test.<br />\n
          This standard provides guidance to establish the test parameters listed above, determine seismic capacity and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and or after the specified seismic motion. In addition, this standard provides the documentation requirements necessary to demonstrate seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1694037600 {#7292
      date: 2023-09-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1398808800 {#7318
      date: 2014-04-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#93321
  +product: App\Entity\Product\Product {#7310
    #id: 11013
    #code: "IEEE00005436"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039424 {#7274
      date: 2025-06-27 17:50:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 39061
        #name: "IEEE C37.98:2013"
        #slug: "ieee-c37-98-2013-ieee00005436-242665"
        #description: """
          Revision Standard - Superseded.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). This standard covers relays used in nuclear facilities, but may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEEE Std 344; fragility, proof and generic testing. To define the specific conditions for seismic testing of protective relays the following parameters shall be specified:<br />\n
          a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test.<br />\n
          b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure.<br />\n
          c) The seismic levels (required response spectra) to be imposed during the test.<br />\n
          This standard provides guidance to establish the test parameters listed above, determine seismic capacity and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and or after the specified seismic motion. In addition, this standard provides the documentation requirements necessary to demonstrate seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1694037600 {#7292
      date: 2023-09-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1398808800 {#7318
      date: 2014-04-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductState App\Twig\Components\ProductState 406.0 MiB 0.19 ms
Input props 
[
  "product" => App\Entity\Product\Product {#106762
    #id: 9595
    #code: "IEEE00002613"
    #attributes: Doctrine\ORM\PersistentCollection {#106743 …}
    #variants: Doctrine\ORM\PersistentCollection {#106741 …}
    #options: Doctrine\ORM\PersistentCollection {#106736 …}
    #associations: Doctrine\ORM\PersistentCollection {#106739 …}
    #createdAt: DateTime @1751038393 {#106771
      date: 2025-06-27 17:33:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#106744
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106754 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106795
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106762}
        #id: 33389
        #name: "IEEE C37.98:1987 (R1999)"
        #slug: "ieee-c37-98-1987-r1999-ieee00002613-241247"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          Administratively Withdrawn January 2007 The procedures to be used in the seismic testing of relays used in power system facilities are specified. The concern is with determining the seismic fragility level of relays. Recommendations for proof testing are given. Documentation and generalization of test results are discussed.<br />\n
          \t\t\t\t<br />\n
          The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in IEEE Std 344-1987. To define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general, they are: 1) The electrical settings and inputs to the relay, and other information to define its conditions during the test.; 2) The change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay that constitutes failure.; 3) The seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new application, then proof testing must be performed for that new case. The use of these capability data will assist in the selection of relays. One number will be used to catalog the seismic capability of a relay. This number is the zero period acceleration level, and is understood to refer to the standard response spectrum shape as defined in this standard. The capability data will help designers of generating stations, substations, and various other power system installations to incorporate the seismic capabilities of the relays into the overall design of these facilities.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Seismic Testing of Relays"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106752 …}
    #channels: Doctrine\ORM\PersistentCollection {#106746 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106750 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106748 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106761 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106731
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106770
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @567644400 {#106769
      date: 1987-12-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @930348000 {#106763
      date: 1999-06-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1169074800 {#106764
      date: 2007-01-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#106759 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106757 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#106777
  +product: App\Entity\Product\Product {#106762
    #id: 9595
    #code: "IEEE00002613"
    #attributes: Doctrine\ORM\PersistentCollection {#106743 …}
    #variants: Doctrine\ORM\PersistentCollection {#106741 …}
    #options: Doctrine\ORM\PersistentCollection {#106736 …}
    #associations: Doctrine\ORM\PersistentCollection {#106739 …}
    #createdAt: DateTime @1751038393 {#106771
      date: 2025-06-27 17:33:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#106744
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106754 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106795
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106762}
        #id: 33389
        #name: "IEEE C37.98:1987 (R1999)"
        #slug: "ieee-c37-98-1987-r1999-ieee00002613-241247"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          Administratively Withdrawn January 2007 The procedures to be used in the seismic testing of relays used in power system facilities are specified. The concern is with determining the seismic fragility level of relays. Recommendations for proof testing are given. Documentation and generalization of test results are discussed.<br />\n
          \t\t\t\t<br />\n
          The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in IEEE Std 344-1987. To define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general, they are: 1) The electrical settings and inputs to the relay, and other information to define its conditions during the test.; 2) The change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay that constitutes failure.; 3) The seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new application, then proof testing must be performed for that new case. The use of these capability data will assist in the selection of relays. One number will be used to catalog the seismic capability of a relay. This number is the zero period acceleration level, and is understood to refer to the standard response spectrum shape as defined in this standard. The capability data will help designers of generating stations, substations, and various other power system installations to incorporate the seismic capabilities of the relays into the overall design of these facilities.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Seismic Testing of Relays"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106752 …}
    #channels: Doctrine\ORM\PersistentCollection {#106746 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106750 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106748 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106761 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106731
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106770
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @567644400 {#106769
      date: 1987-12-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @930348000 {#106763
      date: 1999-06-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1169074800 {#106764
      date: 2007-01-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#106759 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106757 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
    "Confirmed"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 406.0 MiB 0.67 ms
Input props 
[
  "product" => App\Entity\Product\Product {#106762
    #id: 9595
    #code: "IEEE00002613"
    #attributes: Doctrine\ORM\PersistentCollection {#106743 …}
    #variants: Doctrine\ORM\PersistentCollection {#106741 …}
    #options: Doctrine\ORM\PersistentCollection {#106736 …}
    #associations: Doctrine\ORM\PersistentCollection {#106739 …}
    #createdAt: DateTime @1751038393 {#106771
      date: 2025-06-27 17:33:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#106744
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106754 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106795
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106762}
        #id: 33389
        #name: "IEEE C37.98:1987 (R1999)"
        #slug: "ieee-c37-98-1987-r1999-ieee00002613-241247"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          Administratively Withdrawn January 2007 The procedures to be used in the seismic testing of relays used in power system facilities are specified. The concern is with determining the seismic fragility level of relays. Recommendations for proof testing are given. Documentation and generalization of test results are discussed.<br />\n
          \t\t\t\t<br />\n
          The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in IEEE Std 344-1987. To define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general, they are: 1) The electrical settings and inputs to the relay, and other information to define its conditions during the test.; 2) The change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay that constitutes failure.; 3) The seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new application, then proof testing must be performed for that new case. The use of these capability data will assist in the selection of relays. One number will be used to catalog the seismic capability of a relay. This number is the zero period acceleration level, and is understood to refer to the standard response spectrum shape as defined in this standard. The capability data will help designers of generating stations, substations, and various other power system installations to incorporate the seismic capabilities of the relays into the overall design of these facilities.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Seismic Testing of Relays"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106752 …}
    #channels: Doctrine\ORM\PersistentCollection {#106746 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106750 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106748 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106761 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106731
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106770
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @567644400 {#106769
      date: 1987-12-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @930348000 {#106763
      date: 1999-06-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1169074800 {#106764
      date: 2007-01-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#106759 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106757 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#106884
  +product: App\Entity\Product\Product {#106762
    #id: 9595
    #code: "IEEE00002613"
    #attributes: Doctrine\ORM\PersistentCollection {#106743 …}
    #variants: Doctrine\ORM\PersistentCollection {#106741 …}
    #options: Doctrine\ORM\PersistentCollection {#106736 …}
    #associations: Doctrine\ORM\PersistentCollection {#106739 …}
    #createdAt: DateTime @1751038393 {#106771
      date: 2025-06-27 17:33:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#106744
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106754 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106795
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106762}
        #id: 33389
        #name: "IEEE C37.98:1987 (R1999)"
        #slug: "ieee-c37-98-1987-r1999-ieee00002613-241247"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          Administratively Withdrawn January 2007 The procedures to be used in the seismic testing of relays used in power system facilities are specified. The concern is with determining the seismic fragility level of relays. Recommendations for proof testing are given. Documentation and generalization of test results are discussed.<br />\n
          \t\t\t\t<br />\n
          The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in IEEE Std 344-1987. To define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general, they are: 1) The electrical settings and inputs to the relay, and other information to define its conditions during the test.; 2) The change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay that constitutes failure.; 3) The seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new application, then proof testing must be performed for that new case. The use of these capability data will assist in the selection of relays. One number will be used to catalog the seismic capability of a relay. This number is the zero period acceleration level, and is understood to refer to the standard response spectrum shape as defined in this standard. The capability data will help designers of generating stations, substations, and various other power system installations to incorporate the seismic capabilities of the relays into the overall design of these facilities.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Seismic Testing of Relays"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106752 …}
    #channels: Doctrine\ORM\PersistentCollection {#106746 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106750 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106748 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106761 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106731
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106770
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @567644400 {#106769
      date: 1987-12-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @930348000 {#106763
      date: 1999-06-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1169074800 {#106764
      date: 2007-01-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#106759 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106757 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductState App\Twig\Components\ProductState 406.0 MiB 0.18 ms
Input props 
[
  "product" => App\Entity\Product\Product {#93762
    #id: 12706
    #code: "IEEE00010494"
    #attributes: Doctrine\ORM\PersistentCollection {#93744 …}
    #variants: Doctrine\ORM\PersistentCollection {#93741 …}
    #options: Doctrine\ORM\PersistentCollection {#93737 …}
    #associations: Doctrine\ORM\PersistentCollection {#93739 …}
    #createdAt: DateTime @1751040608 {#93770
      date: 2025-06-27 18:10:08.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93749
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93755 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93790
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93762}
        #id: 45833
        #name: "IEEE C37.98:2023"
        #slug: "ieee-c37-98-2023-ieee00010494-244361"
        #description: """
          Revision Standard - Active.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). Relays used in nuclear facilities are covered in this standard, but it may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105™. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEC/IEEE 60980-344: fragility, proof, and generic testing. To define the specific conditions for seismic testing of protective relays, the following parameters shall be specified: a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure c) The seismic levels (required response spectra) to be imposed during the test This standard provides guidance to establish the test parameters listed above, to determine seismic capacity, and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and/or after the specified seismic motion. In addition, this standard provides the requirements for documenting the necessary seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93753 …}
    #channels: Doctrine\ORM\PersistentCollection {#93746 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93751 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93748 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93763 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93733
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1724623200 {#93769
      date: 2024-08-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1694124000 {#93768
      date: 2023-09-08 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#93759 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93757 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#113504
  +product: App\Entity\Product\Product {#93762
    #id: 12706
    #code: "IEEE00010494"
    #attributes: Doctrine\ORM\PersistentCollection {#93744 …}
    #variants: Doctrine\ORM\PersistentCollection {#93741 …}
    #options: Doctrine\ORM\PersistentCollection {#93737 …}
    #associations: Doctrine\ORM\PersistentCollection {#93739 …}
    #createdAt: DateTime @1751040608 {#93770
      date: 2025-06-27 18:10:08.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93749
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93755 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93790
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93762}
        #id: 45833
        #name: "IEEE C37.98:2023"
        #slug: "ieee-c37-98-2023-ieee00010494-244361"
        #description: """
          Revision Standard - Active.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). Relays used in nuclear facilities are covered in this standard, but it may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105™. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEC/IEEE 60980-344: fragility, proof, and generic testing. To define the specific conditions for seismic testing of protective relays, the following parameters shall be specified: a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure c) The seismic levels (required response spectra) to be imposed during the test This standard provides guidance to establish the test parameters listed above, to determine seismic capacity, and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and/or after the specified seismic motion. In addition, this standard provides the requirements for documenting the necessary seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93753 …}
    #channels: Doctrine\ORM\PersistentCollection {#93746 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93751 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93748 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93763 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93733
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1724623200 {#93769
      date: 2024-08-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1694124000 {#93768
      date: 2023-09-08 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#93759 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93757 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 406.0 MiB 0.67 ms
Input props 
[
  "product" => App\Entity\Product\Product {#93762
    #id: 12706
    #code: "IEEE00010494"
    #attributes: Doctrine\ORM\PersistentCollection {#93744 …}
    #variants: Doctrine\ORM\PersistentCollection {#93741 …}
    #options: Doctrine\ORM\PersistentCollection {#93737 …}
    #associations: Doctrine\ORM\PersistentCollection {#93739 …}
    #createdAt: DateTime @1751040608 {#93770
      date: 2025-06-27 18:10:08.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93749
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93755 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93790
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93762}
        #id: 45833
        #name: "IEEE C37.98:2023"
        #slug: "ieee-c37-98-2023-ieee00010494-244361"
        #description: """
          Revision Standard - Active.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). Relays used in nuclear facilities are covered in this standard, but it may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105™. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEC/IEEE 60980-344: fragility, proof, and generic testing. To define the specific conditions for seismic testing of protective relays, the following parameters shall be specified: a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure c) The seismic levels (required response spectra) to be imposed during the test This standard provides guidance to establish the test parameters listed above, to determine seismic capacity, and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and/or after the specified seismic motion. In addition, this standard provides the requirements for documenting the necessary seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93753 …}
    #channels: Doctrine\ORM\PersistentCollection {#93746 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93751 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93748 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93763 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93733
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1724623200 {#93769
      date: 2024-08-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1694124000 {#93768
      date: 2023-09-08 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#93759 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93757 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#113571
  +product: App\Entity\Product\Product {#93762
    #id: 12706
    #code: "IEEE00010494"
    #attributes: Doctrine\ORM\PersistentCollection {#93744 …}
    #variants: Doctrine\ORM\PersistentCollection {#93741 …}
    #options: Doctrine\ORM\PersistentCollection {#93737 …}
    #associations: Doctrine\ORM\PersistentCollection {#93739 …}
    #createdAt: DateTime @1751040608 {#93770
      date: 2025-06-27 18:10:08.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93749
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93755 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93790
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93762}
        #id: 45833
        #name: "IEEE C37.98:2023"
        #slug: "ieee-c37-98-2023-ieee00010494-244361"
        #description: """
          Revision Standard - Active.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). Relays used in nuclear facilities are covered in this standard, but it may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105™. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEC/IEEE 60980-344: fragility, proof, and generic testing. To define the specific conditions for seismic testing of protective relays, the following parameters shall be specified: a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure c) The seismic levels (required response spectra) to be imposed during the test This standard provides guidance to establish the test parameters listed above, to determine seismic capacity, and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and/or after the specified seismic motion. In addition, this standard provides the requirements for documenting the necessary seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93753 …}
    #channels: Doctrine\ORM\PersistentCollection {#93746 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93751 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93748 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93763 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93733
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1724623200 {#93769
      date: 2024-08-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1694124000 {#93768
      date: 2023-09-08 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 34
    -documents: Doctrine\ORM\PersistentCollection {#93759 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93757 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductState App\Twig\Components\ProductState 406.0 MiB 0.15 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 11013
    #code: "IEEE00005436"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039424 {#7274
      date: 2025-06-27 17:50:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 39061
        #name: "IEEE C37.98:2013"
        #slug: "ieee-c37-98-2013-ieee00005436-242665"
        #description: """
          Revision Standard - Superseded.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). This standard covers relays used in nuclear facilities, but may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEEE Std 344; fragility, proof and generic testing. To define the specific conditions for seismic testing of protective relays the following parameters shall be specified:<br />\n
          a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test.<br />\n
          b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure.<br />\n
          c) The seismic levels (required response spectra) to be imposed during the test.<br />\n
          This standard provides guidance to establish the test parameters listed above, determine seismic capacity and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and or after the specified seismic motion. In addition, this standard provides the documentation requirements necessary to demonstrate seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1694037600 {#7292
      date: 2023-09-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1398808800 {#7318
      date: 2014-04-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#113636
  +product: App\Entity\Product\Product {#7310
    #id: 11013
    #code: "IEEE00005436"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039424 {#7274
      date: 2025-06-27 17:50:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 39061
        #name: "IEEE C37.98:2013"
        #slug: "ieee-c37-98-2013-ieee00005436-242665"
        #description: """
          Revision Standard - Superseded.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). This standard covers relays used in nuclear facilities, but may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEEE Std 344; fragility, proof and generic testing. To define the specific conditions for seismic testing of protective relays the following parameters shall be specified:<br />\n
          a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test.<br />\n
          b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure.<br />\n
          c) The seismic levels (required response spectra) to be imposed during the test.<br />\n
          This standard provides guidance to establish the test parameters listed above, determine seismic capacity and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and or after the specified seismic motion. In addition, this standard provides the documentation requirements necessary to demonstrate seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1694037600 {#7292
      date: 2023-09-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1398808800 {#7318
      date: 2014-04-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 406.0 MiB 0.58 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 11013
    #code: "IEEE00005436"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039424 {#7274
      date: 2025-06-27 17:50:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 39061
        #name: "IEEE C37.98:2013"
        #slug: "ieee-c37-98-2013-ieee00005436-242665"
        #description: """
          Revision Standard - Superseded.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). This standard covers relays used in nuclear facilities, but may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEEE Std 344; fragility, proof and generic testing. To define the specific conditions for seismic testing of protective relays the following parameters shall be specified:<br />\n
          a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test.<br />\n
          b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure.<br />\n
          c) The seismic levels (required response spectra) to be imposed during the test.<br />\n
          This standard provides guidance to establish the test parameters listed above, determine seismic capacity and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and or after the specified seismic motion. In addition, this standard provides the documentation requirements necessary to demonstrate seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1694037600 {#7292
      date: 2023-09-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1398808800 {#7318
      date: 2014-04-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#113663
  +product: App\Entity\Product\Product {#7310
    #id: 11013
    #code: "IEEE00005436"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751039424 {#7274
      date: 2025-06-27 17:50:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#7322
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 39061
        #name: "IEEE C37.98:2013"
        #slug: "ieee-c37-98-2013-ieee00005436-242665"
        #description: """
          Revision Standard - Superseded.<br />\n
          The methods and conditions for seismic qualification of protective relays and auxiliaries such as test and control switches, terminal blocks, and indicating lamps for use in nuclear facilities are described in this standard. The primary intent of this standard is to focus on fragility testing and seismic qualification, also known as proof testing (either to generic levels or specific levels). This standard covers relays used in nuclear facilities, but may also be applied to any area in which the seismic response of relays is a design consideration. The prerequisites for the seismic test are defined in IEEE Std C37.105™.<br />\n
          \t\t\t\t<br />\n
          This standard specifies test methods and conditions to be used in the seismic qualification testing of protective relays and auxiliaries such as test and control switches, terminal blocks and indicating lamps for use in nuclear facilities.<br />\n
          The purpose of this standard is to establish test methods and conditions for determining the seismic capability and to demonstrate seismic qualification of protective relays and auxiliaries specified in IEEE Std C37.105. The prerequisites for the qualification testing are defined in IEEE Std C37.105. These test methods are divided into three main categories, as described in IEEE Std 344; fragility, proof and generic testing. To define the specific conditions for seismic testing of protective relays the following parameters shall be specified:<br />\n
          a) The settings and electrical inputs to the protective relay and auxiliaries, and other pertinent information as detailed in this standard required to define its condition during the test.<br />\n
          b) The unintentional change in state, contact chatter, deviation in operating conditions, tolerances, or other change in performance of the relay that constitutes failure.<br />\n
          c) The seismic levels (required response spectra) to be imposed during the test.<br />\n
          This standard provides guidance to establish the test parameters listed above, determine seismic capacity and to demonstrate the ability of protective relays and auxiliaries to perform their safety function during and or after the specified seismic motion. In addition, this standard provides the documentation requirements necessary to demonstrate seismic qualification of protective relays and auxiliaries.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1694037600 {#7292
      date: 2023-09-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1398808800 {#7318
      date: 2014-04-30 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductState App\Twig\Components\ProductState 406.0 MiB 0.15 ms
Input props 
[
  "product" => App\Entity\Product\Product {#106762
    #id: 9595
    #code: "IEEE00002613"
    #attributes: Doctrine\ORM\PersistentCollection {#106743 …}
    #variants: Doctrine\ORM\PersistentCollection {#106741 …}
    #options: Doctrine\ORM\PersistentCollection {#106736 …}
    #associations: Doctrine\ORM\PersistentCollection {#106739 …}
    #createdAt: DateTime @1751038393 {#106771
      date: 2025-06-27 17:33:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#106744
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106754 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106795
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106762}
        #id: 33389
        #name: "IEEE C37.98:1987 (R1999)"
        #slug: "ieee-c37-98-1987-r1999-ieee00002613-241247"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          Administratively Withdrawn January 2007 The procedures to be used in the seismic testing of relays used in power system facilities are specified. The concern is with determining the seismic fragility level of relays. Recommendations for proof testing are given. Documentation and generalization of test results are discussed.<br />\n
          \t\t\t\t<br />\n
          The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in IEEE Std 344-1987. To define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general, they are: 1) The electrical settings and inputs to the relay, and other information to define its conditions during the test.; 2) The change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay that constitutes failure.; 3) The seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new application, then proof testing must be performed for that new case. The use of these capability data will assist in the selection of relays. One number will be used to catalog the seismic capability of a relay. This number is the zero period acceleration level, and is understood to refer to the standard response spectrum shape as defined in this standard. The capability data will help designers of generating stations, substations, and various other power system installations to incorporate the seismic capabilities of the relays into the overall design of these facilities.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Seismic Testing of Relays"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106752 …}
    #channels: Doctrine\ORM\PersistentCollection {#106746 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106750 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106748 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106761 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106731
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106770
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @567644400 {#106769
      date: 1987-12-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @930348000 {#106763
      date: 1999-06-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1169074800 {#106764
      date: 2007-01-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#106759 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106757 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#113727
  +product: App\Entity\Product\Product {#106762
    #id: 9595
    #code: "IEEE00002613"
    #attributes: Doctrine\ORM\PersistentCollection {#106743 …}
    #variants: Doctrine\ORM\PersistentCollection {#106741 …}
    #options: Doctrine\ORM\PersistentCollection {#106736 …}
    #associations: Doctrine\ORM\PersistentCollection {#106739 …}
    #createdAt: DateTime @1751038393 {#106771
      date: 2025-06-27 17:33:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#106744
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106754 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106795
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106762}
        #id: 33389
        #name: "IEEE C37.98:1987 (R1999)"
        #slug: "ieee-c37-98-1987-r1999-ieee00002613-241247"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          Administratively Withdrawn January 2007 The procedures to be used in the seismic testing of relays used in power system facilities are specified. The concern is with determining the seismic fragility level of relays. Recommendations for proof testing are given. Documentation and generalization of test results are discussed.<br />\n
          \t\t\t\t<br />\n
          The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in IEEE Std 344-1987. To define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general, they are: 1) The electrical settings and inputs to the relay, and other information to define its conditions during the test.; 2) The change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay that constitutes failure.; 3) The seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new application, then proof testing must be performed for that new case. The use of these capability data will assist in the selection of relays. One number will be used to catalog the seismic capability of a relay. This number is the zero period acceleration level, and is understood to refer to the standard response spectrum shape as defined in this standard. The capability data will help designers of generating stations, substations, and various other power system installations to incorporate the seismic capabilities of the relays into the overall design of these facilities.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Seismic Testing of Relays"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106752 …}
    #channels: Doctrine\ORM\PersistentCollection {#106746 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106750 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106748 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106761 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106731
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106770
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @567644400 {#106769
      date: 1987-12-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @930348000 {#106763
      date: 1999-06-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1169074800 {#106764
      date: 2007-01-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#106759 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106757 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
    "Confirmed"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 406.0 MiB 0.56 ms
Input props 
[
  "product" => App\Entity\Product\Product {#106762
    #id: 9595
    #code: "IEEE00002613"
    #attributes: Doctrine\ORM\PersistentCollection {#106743 …}
    #variants: Doctrine\ORM\PersistentCollection {#106741 …}
    #options: Doctrine\ORM\PersistentCollection {#106736 …}
    #associations: Doctrine\ORM\PersistentCollection {#106739 …}
    #createdAt: DateTime @1751038393 {#106771
      date: 2025-06-27 17:33:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#106744
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106754 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106795
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106762}
        #id: 33389
        #name: "IEEE C37.98:1987 (R1999)"
        #slug: "ieee-c37-98-1987-r1999-ieee00002613-241247"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          Administratively Withdrawn January 2007 The procedures to be used in the seismic testing of relays used in power system facilities are specified. The concern is with determining the seismic fragility level of relays. Recommendations for proof testing are given. Documentation and generalization of test results are discussed.<br />\n
          \t\t\t\t<br />\n
          The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in IEEE Std 344-1987. To define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general, they are: 1) The electrical settings and inputs to the relay, and other information to define its conditions during the test.; 2) The change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay that constitutes failure.; 3) The seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new application, then proof testing must be performed for that new case. The use of these capability data will assist in the selection of relays. One number will be used to catalog the seismic capability of a relay. This number is the zero period acceleration level, and is understood to refer to the standard response spectrum shape as defined in this standard. The capability data will help designers of generating stations, substations, and various other power system installations to incorporate the seismic capabilities of the relays into the overall design of these facilities.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Seismic Testing of Relays"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106752 …}
    #channels: Doctrine\ORM\PersistentCollection {#106746 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106750 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106748 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106761 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106731
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106770
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @567644400 {#106769
      date: 1987-12-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @930348000 {#106763
      date: 1999-06-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1169074800 {#106764
      date: 2007-01-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#106759 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106757 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#113754
  +product: App\Entity\Product\Product {#106762
    #id: 9595
    #code: "IEEE00002613"
    #attributes: Doctrine\ORM\PersistentCollection {#106743 …}
    #variants: Doctrine\ORM\PersistentCollection {#106741 …}
    #options: Doctrine\ORM\PersistentCollection {#106736 …}
    #associations: Doctrine\ORM\PersistentCollection {#106739 …}
    #createdAt: DateTime @1751038393 {#106771
      date: 2025-06-27 17:33:13.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#106744
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106754 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106795
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106762}
        #id: 33389
        #name: "IEEE C37.98:1987 (R1999)"
        #slug: "ieee-c37-98-1987-r1999-ieee00002613-241247"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          Administratively Withdrawn January 2007 The procedures to be used in the seismic testing of relays used in power system facilities are specified. The concern is with determining the seismic fragility level of relays. Recommendations for proof testing are given. Documentation and generalization of test results are discussed.<br />\n
          \t\t\t\t<br />\n
          The purpose of this standard is to establish procedures for determining the seismic capabilities of protective and auxiliary relays. These procedures employ what has been called fragility testing in IEEE Std 344-1987. To define the conditions for fragility testing of relays, parameters in three separate areas must be specified. In general, they are: 1) The electrical settings and inputs to the relay, and other information to define its conditions during the test.; 2) The change in state, deviation in operating characteristics or tolerances, or other change of performance of the relay that constitutes failure.; 3) The seismic vibration environment to be imposed during the test. Since it is not possible to define the conditions for every conceivable application for all relays, those parameters, which in practice encompass the majority of applications, have been specified in this standard. When the application of the relay is other than as specified under any of (1), (2), and (3), or if it is not practical to apply existing results of fragility tests to that new application, then proof testing must be performed for that new case. The use of these capability data will assist in the selection of relays. One number will be used to catalog the seismic capability of a relay. This number is the zero period acceleration level, and is understood to refer to the standard response spectrum shape as defined in this standard. The capability data will help designers of generating stations, substations, and various other power system installations to incorporate the seismic capabilities of the relays into the overall design of these facilities.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Seismic Testing of Relays"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106752 …}
    #channels: Doctrine\ORM\PersistentCollection {#106746 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106750 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106748 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106761 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106731
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106770
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @567644400 {#106769
      date: 1987-12-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @930348000 {#106763
      date: 1999-06-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1169074800 {#106764
      date: 2007-01-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C37.98"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#106759 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106757 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductCard App\Twig\Components\ProductCard 408.0 MiB 9.67 ms
Input props 
[
  "product" => App\Entity\Product\Product {#135291
    #id: 8477
    #code: "IEEE00000523"
    #attributes: Doctrine\ORM\PersistentCollection {#135274 …}
    #variants: Doctrine\ORM\PersistentCollection {#135272 …}
    #options: Doctrine\ORM\PersistentCollection {#135267 …}
    #associations: Doctrine\ORM\PersistentCollection {#135269 …}
    #createdAt: DateTime @1751037450 {#135264
      date: 2025-06-27 17:17:30.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#135257
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#135285 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#135376
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#135291}
        #id: 28917
        #name: "IEEE 323:2003 (R2008)"
        #slug: "ieee-323-2003-r2008-ieee00000523-240129"
        #description: """
          Revision Standard - Superseded.<br />\n
          The basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations are described in this standard. The principles, methods, and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. The qualification requirements in this standard, when met, demonstrate and document the ability of equipment to perform safety function(s) under applicable service conditions including design basis events, reducing the risk of common-cause equipment failure.<br />\n
          \t\t\t\t<br />\n
          This standard describes the basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations. The principles, methods and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. Meeting the qualification requirements demonstrates and documents the ability of equipment to perform safety function(s) under applicable service conditions including design basis events, thereby minimizing the risk of common-cause equipment failure. This standard does not provide environmental stress levels and performance requirements.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#135283 …}
    #channels: Doctrine\ORM\PersistentCollection {#135276 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#135280 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#135278 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#135293 …}
    -apiLastModifiedAt: DateTime @1754517600 {#135250
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#135299
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1074812400 {#135270
      date: 2004-01-23 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1222380000 {#135251
      date: 2008-09-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "323"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#135289 …}
    -favorites: Doctrine\ORM\PersistentCollection {#135287 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "additionalClasses" => "product__teaser--with-grey-border"
  "hasStretchedLink" => true
  "hoverType" => "shadow"
  "linkLabel" => "See more"
]
Attributes 
[]
Component 
App\Twig\Components\ProductCard {#135347
  +product: App\Entity\Product\Product {#135291
    #id: 8477
    #code: "IEEE00000523"
    #attributes: Doctrine\ORM\PersistentCollection {#135274 …}
    #variants: Doctrine\ORM\PersistentCollection {#135272 …}
    #options: Doctrine\ORM\PersistentCollection {#135267 …}
    #associations: Doctrine\ORM\PersistentCollection {#135269 …}
    #createdAt: DateTime @1751037450 {#135264
      date: 2025-06-27 17:17:30.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#135257
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#135285 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#135376
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#135291}
        #id: 28917
        #name: "IEEE 323:2003 (R2008)"
        #slug: "ieee-323-2003-r2008-ieee00000523-240129"
        #description: """
          Revision Standard - Superseded.<br />\n
          The basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations are described in this standard. The principles, methods, and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. The qualification requirements in this standard, when met, demonstrate and document the ability of equipment to perform safety function(s) under applicable service conditions including design basis events, reducing the risk of common-cause equipment failure.<br />\n
          \t\t\t\t<br />\n
          This standard describes the basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations. The principles, methods and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. Meeting the qualification requirements demonstrates and documents the ability of equipment to perform safety function(s) under applicable service conditions including design basis events, thereby minimizing the risk of common-cause equipment failure. This standard does not provide environmental stress levels and performance requirements.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#135283 …}
    #channels: Doctrine\ORM\PersistentCollection {#135276 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#135280 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#135278 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#135293 …}
    -apiLastModifiedAt: DateTime @1754517600 {#135250
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#135299
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1074812400 {#135270
      date: 2004-01-23 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1222380000 {#135251
      date: 2008-09-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "323"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#135289 …}
    -favorites: Doctrine\ORM\PersistentCollection {#135287 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "product__teaser--with-grey-border"
  +linkLabel: "See more"
  +imageFilter: "product_thumbnail_teaser"
  +hasStretchedLink: true
  +backgroundColor: "white"
  +hoverType: "shadow"
}
ProductState App\Twig\Components\ProductState 408.0 MiB 0.17 ms
Input props 
[
  "product" => App\Entity\Product\Product {#135291
    #id: 8477
    #code: "IEEE00000523"
    #attributes: Doctrine\ORM\PersistentCollection {#135274 …}
    #variants: Doctrine\ORM\PersistentCollection {#135272 …}
    #options: Doctrine\ORM\PersistentCollection {#135267 …}
    #associations: Doctrine\ORM\PersistentCollection {#135269 …}
    #createdAt: DateTime @1751037450 {#135264
      date: 2025-06-27 17:17:30.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#135257
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#135285 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#135376
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#135291}
        #id: 28917
        #name: "IEEE 323:2003 (R2008)"
        #slug: "ieee-323-2003-r2008-ieee00000523-240129"
        #description: """
          Revision Standard - Superseded.<br />\n
          The basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations are described in this standard. The principles, methods, and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. The qualification requirements in this standard, when met, demonstrate and document the ability of equipment to perform safety function(s) under applicable service conditions including design basis events, reducing the risk of common-cause equipment failure.<br />\n
          \t\t\t\t<br />\n
          This standard describes the basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations. The principles, methods and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. Meeting the qualification requirements demonstrates and documents the ability of equipment to perform safety function(s) under applicable service conditions including design basis events, thereby minimizing the risk of common-cause equipment failure. This standard does not provide environmental stress levels and performance requirements.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#135283 …}
    #channels: Doctrine\ORM\PersistentCollection {#135276 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#135280 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#135278 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#135293 …}
    -apiLastModifiedAt: DateTime @1754517600 {#135250
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#135299
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1074812400 {#135270
      date: 2004-01-23 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1222380000 {#135251
      date: 2008-09-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "323"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#135289 …}
    -favorites: Doctrine\ORM\PersistentCollection {#135287 …}
  }
]
Attributes 
[
  "showFullLabel" => false
]
Component 
App\Twig\Components\ProductState {#135380
  +product: App\Entity\Product\Product {#135291
    #id: 8477
    #code: "IEEE00000523"
    #attributes: Doctrine\ORM\PersistentCollection {#135274 …}
    #variants: Doctrine\ORM\PersistentCollection {#135272 …}
    #options: Doctrine\ORM\PersistentCollection {#135267 …}
    #associations: Doctrine\ORM\PersistentCollection {#135269 …}
    #createdAt: DateTime @1751037450 {#135264
      date: 2025-06-27 17:17:30.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#135257
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#135285 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#135376
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#135291}
        #id: 28917
        #name: "IEEE 323:2003 (R2008)"
        #slug: "ieee-323-2003-r2008-ieee00000523-240129"
        #description: """
          Revision Standard - Superseded.<br />\n
          The basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations are described in this standard. The principles, methods, and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. The qualification requirements in this standard, when met, demonstrate and document the ability of equipment to perform safety function(s) under applicable service conditions including design basis events, reducing the risk of common-cause equipment failure.<br />\n
          \t\t\t\t<br />\n
          This standard describes the basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations. The principles, methods and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. Meeting the qualification requirements demonstrates and documents the ability of equipment to perform safety function(s) under applicable service conditions including design basis events, thereby minimizing the risk of common-cause equipment failure. This standard does not provide environmental stress levels and performance requirements.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#135283 …}
    #channels: Doctrine\ORM\PersistentCollection {#135276 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#135280 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#135278 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#135293 …}
    -apiLastModifiedAt: DateTime @1754517600 {#135250
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#135299
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1074812400 {#135270
      date: 2004-01-23 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1222380000 {#135251
      date: 2008-09-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "323"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#135289 …}
    -favorites: Doctrine\ORM\PersistentCollection {#135287 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 408.0 MiB 0.64 ms
Input props 
[
  "product" => App\Entity\Product\Product {#135291
    #id: 8477
    #code: "IEEE00000523"
    #attributes: Doctrine\ORM\PersistentCollection {#135274 …}
    #variants: Doctrine\ORM\PersistentCollection {#135272 …}
    #options: Doctrine\ORM\PersistentCollection {#135267 …}
    #associations: Doctrine\ORM\PersistentCollection {#135269 …}
    #createdAt: DateTime @1751037450 {#135264
      date: 2025-06-27 17:17:30.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#135257
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#135285 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#135376
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#135291}
        #id: 28917
        #name: "IEEE 323:2003 (R2008)"
        #slug: "ieee-323-2003-r2008-ieee00000523-240129"
        #description: """
          Revision Standard - Superseded.<br />\n
          The basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations are described in this standard. The principles, methods, and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. The qualification requirements in this standard, when met, demonstrate and document the ability of equipment to perform safety function(s) under applicable service conditions including design basis events, reducing the risk of common-cause equipment failure.<br />\n
          \t\t\t\t<br />\n
          This standard describes the basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations. The principles, methods and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. Meeting the qualification requirements demonstrates and documents the ability of equipment to perform safety function(s) under applicable service conditions including design basis events, thereby minimizing the risk of common-cause equipment failure. This standard does not provide environmental stress levels and performance requirements.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#135283 …}
    #channels: Doctrine\ORM\PersistentCollection {#135276 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#135280 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#135278 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#135293 …}
    -apiLastModifiedAt: DateTime @1754517600 {#135250
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#135299
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1074812400 {#135270
      date: 2004-01-23 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1222380000 {#135251
      date: 2008-09-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "323"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#135289 …}
    -favorites: Doctrine\ORM\PersistentCollection {#135287 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#135458
  +product: App\Entity\Product\Product {#135291
    #id: 8477
    #code: "IEEE00000523"
    #attributes: Doctrine\ORM\PersistentCollection {#135274 …}
    #variants: Doctrine\ORM\PersistentCollection {#135272 …}
    #options: Doctrine\ORM\PersistentCollection {#135267 …}
    #associations: Doctrine\ORM\PersistentCollection {#135269 …}
    #createdAt: DateTime @1751037450 {#135264
      date: 2025-06-27 17:17:30.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#135257
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#135285 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#135376
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#135291}
        #id: 28917
        #name: "IEEE 323:2003 (R2008)"
        #slug: "ieee-323-2003-r2008-ieee00000523-240129"
        #description: """
          Revision Standard - Superseded.<br />\n
          The basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations are described in this standard. The principles, methods, and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. The qualification requirements in this standard, when met, demonstrate and document the ability of equipment to perform safety function(s) under applicable service conditions including design basis events, reducing the risk of common-cause equipment failure.<br />\n
          \t\t\t\t<br />\n
          This standard describes the basic requirements for qualifying Class 1E equipment and interfaces that are to be used in nuclear power generating stations. The principles, methods and procedures described are intended to be used for qualifying equipment, maintaining and extending qualification, and updating qualification, as required, if the equipment is modified. Meeting the qualification requirements demonstrates and documents the ability of equipment to perform safety function(s) under applicable service conditions including design basis events, thereby minimizing the risk of common-cause equipment failure. This standard does not provide environmental stress levels and performance requirements.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#135283 …}
    #channels: Doctrine\ORM\PersistentCollection {#135276 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#135280 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#135278 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#135293 …}
    -apiLastModifiedAt: DateTime @1754517600 {#135250
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#135299
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1074812400 {#135270
      date: 2004-01-23 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1222380000 {#135251
      date: 2008-09-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "323"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#135289 …}
    -favorites: Doctrine\ORM\PersistentCollection {#135287 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}