Symfony Profiler

[
  "backLabel" => "Energy"
  "backUrl" => "/taxons/main/technical-dossiers-526/energy-5631"
  "paddingClasses" => "p-2 px-lg-5 py-lg-0"
  "searchPlaceholder" => "sylius.ui.search"
  "showSearch" => "true"
  "title" => "ASME Energy Assessment Performance And Sustainability Package"
]

App\Twig\Components\PageBanner {#94425
  +supTitle: null
  +title: "ASME Energy Assessment Performance And Sustainability Package"
  +subTitle: null
  +backUrl: "/taxons/main/technical-dossiers-526/energy-5631"
  +backLabel: "Energy"
  +customClasses: null
  +backgroundType: null
  +centered: true
  +showSearch: true
  +searchPlaceholder: "sylius.ui.search"
  +searchValue: null
  +paddingClasses: "p-2 px-lg-5 py-lg-0"
}

[
  "url" => "/taxons/main/technical-dossiers-526/energy-5631"
  "label" => "Energy"
]

App\Twig\Components\BackButton {#94516
  +label: "Energy"
  +url: "/taxons/main/technical-dossiers-526/energy-5631"
}

[
  "product" => App\Entity\Product\Product {#95112
    #id: 4525
    #code: "ASMEC0000R_1970"
    #attributes: Doctrine\ORM\PersistentCollection {#95176 …}
    #variants: Doctrine\ORM\PersistentCollection {#95174 …}
    #options: Doctrine\ORM\PersistentCollection {#95170 …}
    #associations: Doctrine\ORM\PersistentCollection {#95172 …}
    #createdAt: DateTime @1751033152 {#95114
      date: 2025-06-27 16:05:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95120
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95186 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#95703
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95112}
        #id: 18074
        #name: "ASME PTC 9-1970(R1997)"
        #slug: "asme-ptc-9-1970-r1997-asmec0000r-1970-325340"
        #description: "The purpose of this Code is to establish rules for conducting tests of displacement compressors, vacuum pumps and blowers to determine the following: (a) Capacity in relation to speed, inlet pressure, and discharge pressure. (b) Power consumption in relation to speed, capacity, inlet pressure, and intercooling. In addition, the Code provides rules for adjusting the test results to reconcile them with specified operating conditions. This Code applies to the testing of compressor units when operated under conditions which permit discharging the gas compressed into the atmosphere or into pipe lines or receivers in which the pressure may be maintained essentially uniform and free from pulsations. It is intended to cover the compressor only, and is applicable only when the unit is operated without inlet pipe or duct, or when the magnitude and the over-all effect of pressure waves within an inlet duct fall within limits specified in this code. Because of pulsating flow conditions inherent in displacement compressors, uniformly accurate methods of tests are not available under all operating conditions. The Code specifically requires the parties to the test to choose from alternate methods described in this Code for conducting such tests."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Displacement Compressors, Vacuum Pumps and Blowers"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95184 …}
    #channels: Doctrine\ORM\PersistentCollection {#95178 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95182 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95180 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95192 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95125
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @-3600 {#95128
      date: 1970-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @852073200 {#95126
      date: 1997-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.9"
    -bookCollection: ""
    -pageCount: 41
    -documents: Doctrine\ORM\PersistentCollection {#95190 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95188 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "imageFilter" => "product_listing_thumbnail"
  "additionalClasses" => "h-100 border-0"
  "hasStretchedLink" => true
  "backgroundColor" => "white"
  "hoverType" => "border-black"
]

App\Twig\Components\ProductCard {#95587
  +product: App\Entity\Product\Product {#95112
    #id: 4525
    #code: "ASMEC0000R_1970"
    #attributes: Doctrine\ORM\PersistentCollection {#95176 …}
    #variants: Doctrine\ORM\PersistentCollection {#95174 …}
    #options: Doctrine\ORM\PersistentCollection {#95170 …}
    #associations: Doctrine\ORM\PersistentCollection {#95172 …}
    #createdAt: DateTime @1751033152 {#95114
      date: 2025-06-27 16:05:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95120
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95186 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#95703
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95112}
        #id: 18074
        #name: "ASME PTC 9-1970(R1997)"
        #slug: "asme-ptc-9-1970-r1997-asmec0000r-1970-325340"
        #description: "The purpose of this Code is to establish rules for conducting tests of displacement compressors, vacuum pumps and blowers to determine the following: (a) Capacity in relation to speed, inlet pressure, and discharge pressure. (b) Power consumption in relation to speed, capacity, inlet pressure, and intercooling. In addition, the Code provides rules for adjusting the test results to reconcile them with specified operating conditions. This Code applies to the testing of compressor units when operated under conditions which permit discharging the gas compressed into the atmosphere or into pipe lines or receivers in which the pressure may be maintained essentially uniform and free from pulsations. It is intended to cover the compressor only, and is applicable only when the unit is operated without inlet pipe or duct, or when the magnitude and the over-all effect of pressure waves within an inlet duct fall within limits specified in this code. Because of pulsating flow conditions inherent in displacement compressors, uniformly accurate methods of tests are not available under all operating conditions. The Code specifically requires the parties to the test to choose from alternate methods described in this Code for conducting such tests."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Displacement Compressors, Vacuum Pumps and Blowers"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95184 …}
    #channels: Doctrine\ORM\PersistentCollection {#95178 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95182 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95180 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95192 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95125
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @-3600 {#95128
      date: 1970-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @852073200 {#95126
      date: 1997-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.9"
    -bookCollection: ""
    -pageCount: 41
    -documents: Doctrine\ORM\PersistentCollection {#95190 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95188 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "h-100 border-0"
  +linkLabel: ""
  +imageFilter: "product_listing_thumbnail"
  +hasStretchedLink: true
  +backgroundColor: "white"
  +hoverType: "border-black"
}

[
  "product" => App\Entity\Product\Product {#95112
    #id: 4525
    #code: "ASMEC0000R_1970"
    #attributes: Doctrine\ORM\PersistentCollection {#95176 …}
    #variants: Doctrine\ORM\PersistentCollection {#95174 …}
    #options: Doctrine\ORM\PersistentCollection {#95170 …}
    #associations: Doctrine\ORM\PersistentCollection {#95172 …}
    #createdAt: DateTime @1751033152 {#95114
      date: 2025-06-27 16:05:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95120
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95186 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#95703
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95112}
        #id: 18074
        #name: "ASME PTC 9-1970(R1997)"
        #slug: "asme-ptc-9-1970-r1997-asmec0000r-1970-325340"
        #description: "The purpose of this Code is to establish rules for conducting tests of displacement compressors, vacuum pumps and blowers to determine the following: (a) Capacity in relation to speed, inlet pressure, and discharge pressure. (b) Power consumption in relation to speed, capacity, inlet pressure, and intercooling. In addition, the Code provides rules for adjusting the test results to reconcile them with specified operating conditions. This Code applies to the testing of compressor units when operated under conditions which permit discharging the gas compressed into the atmosphere or into pipe lines or receivers in which the pressure may be maintained essentially uniform and free from pulsations. It is intended to cover the compressor only, and is applicable only when the unit is operated without inlet pipe or duct, or when the magnitude and the over-all effect of pressure waves within an inlet duct fall within limits specified in this code. Because of pulsating flow conditions inherent in displacement compressors, uniformly accurate methods of tests are not available under all operating conditions. The Code specifically requires the parties to the test to choose from alternate methods described in this Code for conducting such tests."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Displacement Compressors, Vacuum Pumps and Blowers"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95184 …}
    #channels: Doctrine\ORM\PersistentCollection {#95178 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95182 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95180 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95192 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95125
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @-3600 {#95128
      date: 1970-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @852073200 {#95126
      date: 1997-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.9"
    -bookCollection: ""
    -pageCount: 41
    -documents: Doctrine\ORM\PersistentCollection {#95190 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95188 …}
  }
]

[
  "showFullLabel" => false
]

App\Twig\Components\ProductState {#95710
  +product: App\Entity\Product\Product {#95112
    #id: 4525
    #code: "ASMEC0000R_1970"
    #attributes: Doctrine\ORM\PersistentCollection {#95176 …}
    #variants: Doctrine\ORM\PersistentCollection {#95174 …}
    #options: Doctrine\ORM\PersistentCollection {#95170 …}
    #associations: Doctrine\ORM\PersistentCollection {#95172 …}
    #createdAt: DateTime @1751033152 {#95114
      date: 2025-06-27 16:05:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95120
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95186 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#95703
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95112}
        #id: 18074
        #name: "ASME PTC 9-1970(R1997)"
        #slug: "asme-ptc-9-1970-r1997-asmec0000r-1970-325340"
        #description: "The purpose of this Code is to establish rules for conducting tests of displacement compressors, vacuum pumps and blowers to determine the following: (a) Capacity in relation to speed, inlet pressure, and discharge pressure. (b) Power consumption in relation to speed, capacity, inlet pressure, and intercooling. In addition, the Code provides rules for adjusting the test results to reconcile them with specified operating conditions. This Code applies to the testing of compressor units when operated under conditions which permit discharging the gas compressed into the atmosphere or into pipe lines or receivers in which the pressure may be maintained essentially uniform and free from pulsations. It is intended to cover the compressor only, and is applicable only when the unit is operated without inlet pipe or duct, or when the magnitude and the over-all effect of pressure waves within an inlet duct fall within limits specified in this code. Because of pulsating flow conditions inherent in displacement compressors, uniformly accurate methods of tests are not available under all operating conditions. The Code specifically requires the parties to the test to choose from alternate methods described in this Code for conducting such tests."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Displacement Compressors, Vacuum Pumps and Blowers"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95184 …}
    #channels: Doctrine\ORM\PersistentCollection {#95178 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95182 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95180 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95192 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95125
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @-3600 {#95128
      date: 1970-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @852073200 {#95126
      date: 1997-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.9"
    -bookCollection: ""
    -pageCount: 41
    -documents: Doctrine\ORM\PersistentCollection {#95190 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95188 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1831 …}
}

[
  "product" => App\Entity\Product\Product {#95112
    #id: 4525
    #code: "ASMEC0000R_1970"
    #attributes: Doctrine\ORM\PersistentCollection {#95176 …}
    #variants: Doctrine\ORM\PersistentCollection {#95174 …}
    #options: Doctrine\ORM\PersistentCollection {#95170 …}
    #associations: Doctrine\ORM\PersistentCollection {#95172 …}
    #createdAt: DateTime @1751033152 {#95114
      date: 2025-06-27 16:05:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95120
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95186 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#95703
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95112}
        #id: 18074
        #name: "ASME PTC 9-1970(R1997)"
        #slug: "asme-ptc-9-1970-r1997-asmec0000r-1970-325340"
        #description: "The purpose of this Code is to establish rules for conducting tests of displacement compressors, vacuum pumps and blowers to determine the following: (a) Capacity in relation to speed, inlet pressure, and discharge pressure. (b) Power consumption in relation to speed, capacity, inlet pressure, and intercooling. In addition, the Code provides rules for adjusting the test results to reconcile them with specified operating conditions. This Code applies to the testing of compressor units when operated under conditions which permit discharging the gas compressed into the atmosphere or into pipe lines or receivers in which the pressure may be maintained essentially uniform and free from pulsations. It is intended to cover the compressor only, and is applicable only when the unit is operated without inlet pipe or duct, or when the magnitude and the over-all effect of pressure waves within an inlet duct fall within limits specified in this code. Because of pulsating flow conditions inherent in displacement compressors, uniformly accurate methods of tests are not available under all operating conditions. The Code specifically requires the parties to the test to choose from alternate methods described in this Code for conducting such tests."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Displacement Compressors, Vacuum Pumps and Blowers"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95184 …}
    #channels: Doctrine\ORM\PersistentCollection {#95178 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95182 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95180 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95192 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95125
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @-3600 {#95128
      date: 1970-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @852073200 {#95126
      date: 1997-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.9"
    -bookCollection: ""
    -pageCount: 41
    -documents: Doctrine\ORM\PersistentCollection {#95190 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95188 …}
  }
]

App\Twig\Components\ProductMostRecent {#95804
  +product: App\Entity\Product\Product {#95112
    #id: 4525
    #code: "ASMEC0000R_1970"
    #attributes: Doctrine\ORM\PersistentCollection {#95176 …}
    #variants: Doctrine\ORM\PersistentCollection {#95174 …}
    #options: Doctrine\ORM\PersistentCollection {#95170 …}
    #associations: Doctrine\ORM\PersistentCollection {#95172 …}
    #createdAt: DateTime @1751033152 {#95114
      date: 2025-06-27 16:05:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95120
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95186 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#95703
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95112}
        #id: 18074
        #name: "ASME PTC 9-1970(R1997)"
        #slug: "asme-ptc-9-1970-r1997-asmec0000r-1970-325340"
        #description: "The purpose of this Code is to establish rules for conducting tests of displacement compressors, vacuum pumps and blowers to determine the following: (a) Capacity in relation to speed, inlet pressure, and discharge pressure. (b) Power consumption in relation to speed, capacity, inlet pressure, and intercooling. In addition, the Code provides rules for adjusting the test results to reconcile them with specified operating conditions. This Code applies to the testing of compressor units when operated under conditions which permit discharging the gas compressed into the atmosphere or into pipe lines or receivers in which the pressure may be maintained essentially uniform and free from pulsations. It is intended to cover the compressor only, and is applicable only when the unit is operated without inlet pipe or duct, or when the magnitude and the over-all effect of pressure waves within an inlet duct fall within limits specified in this code. Because of pulsating flow conditions inherent in displacement compressors, uniformly accurate methods of tests are not available under all operating conditions. The Code specifically requires the parties to the test to choose from alternate methods described in this Code for conducting such tests."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Displacement Compressors, Vacuum Pumps and Blowers"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95184 …}
    #channels: Doctrine\ORM\PersistentCollection {#95178 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95182 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95180 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95192 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95125
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @-3600 {#95128
      date: 1970-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @852073200 {#95126
      date: 1997-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.9"
    -bookCollection: ""
    -pageCount: 41
    -documents: Doctrine\ORM\PersistentCollection {#95190 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95188 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1831 …}
}

[
  "product" => App\Entity\Product\Product {#95163
    #id: 5037
    #code: "ASMEC0000Q_1969"
    #attributes: Doctrine\ORM\PersistentCollection {#95157 …}
    #variants: Doctrine\ORM\PersistentCollection {#95159 …}
    #options: Doctrine\ORM\PersistentCollection {#95194 …}
    #associations: Doctrine\ORM\PersistentCollection {#95161 …}
    #createdAt: DateTime @1751033612 {#95168
      date: 2025-06-27 16:13:32.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95167
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95134 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96017
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95163}
        #id: 20119
        #name: "ASME PTC 4.2-1969 (R2016)"
        #slug: "asme-ptc-4-2-1969-r2016-asmec0000q-1969-520193"
        #description: "The purpose of this code is to establish procedures for conducting performance tests to determine: Capacity, Fineness of product, Raw coal feed, Grindability, Moisture, Sizing, Power consumption and Effect of changes in raw coal Characteristics on product fineness, pulverizer capacity, and power consumption. Effect of changes in pulverizer component settings on product fineness, pulverizer capacity, and power consumption. This Code applies to the pulverizing system as a whole, including all the component parts necessary to take the raw coal, hot air and tempering air at the system inlet, and deliver pulverized coal in proper mixture with air and/or flue gas at the desired temperature at the outlet of the system."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Coal Pulverizers"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95151 …}
    #channels: Doctrine\ORM\PersistentCollection {#95155 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95150 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95153 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95138 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95166
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @-31539600 {#95165
      date: 1969-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @-31539600 {#95164
      date: 1969-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.4.2"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#95141 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95136 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "imageFilter" => "product_listing_thumbnail"
  "additionalClasses" => "h-100 border-0"
  "hasStretchedLink" => true
  "backgroundColor" => "secondary-lighter"
  "hoverType" => "border-black"
]

App\Twig\Components\ProductCard {#95995
  +product: App\Entity\Product\Product {#95163
    #id: 5037
    #code: "ASMEC0000Q_1969"
    #attributes: Doctrine\ORM\PersistentCollection {#95157 …}
    #variants: Doctrine\ORM\PersistentCollection {#95159 …}
    #options: Doctrine\ORM\PersistentCollection {#95194 …}
    #associations: Doctrine\ORM\PersistentCollection {#95161 …}
    #createdAt: DateTime @1751033612 {#95168
      date: 2025-06-27 16:13:32.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95167
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95134 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96017
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95163}
        #id: 20119
        #name: "ASME PTC 4.2-1969 (R2016)"
        #slug: "asme-ptc-4-2-1969-r2016-asmec0000q-1969-520193"
        #description: "The purpose of this code is to establish procedures for conducting performance tests to determine: Capacity, Fineness of product, Raw coal feed, Grindability, Moisture, Sizing, Power consumption and Effect of changes in raw coal Characteristics on product fineness, pulverizer capacity, and power consumption. Effect of changes in pulverizer component settings on product fineness, pulverizer capacity, and power consumption. This Code applies to the pulverizing system as a whole, including all the component parts necessary to take the raw coal, hot air and tempering air at the system inlet, and deliver pulverized coal in proper mixture with air and/or flue gas at the desired temperature at the outlet of the system."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Coal Pulverizers"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95151 …}
    #channels: Doctrine\ORM\PersistentCollection {#95155 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95150 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95153 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95138 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95166
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @-31539600 {#95165
      date: 1969-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @-31539600 {#95164
      date: 1969-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.4.2"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#95141 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95136 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "h-100 border-0"
  +linkLabel: ""
  +imageFilter: "product_listing_thumbnail"
  +hasStretchedLink: true
  +backgroundColor: "secondary-lighter"
  +hoverType: "border-black"
}

[
  "product" => App\Entity\Product\Product {#95163
    #id: 5037
    #code: "ASMEC0000Q_1969"
    #attributes: Doctrine\ORM\PersistentCollection {#95157 …}
    #variants: Doctrine\ORM\PersistentCollection {#95159 …}
    #options: Doctrine\ORM\PersistentCollection {#95194 …}
    #associations: Doctrine\ORM\PersistentCollection {#95161 …}
    #createdAt: DateTime @1751033612 {#95168
      date: 2025-06-27 16:13:32.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95167
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95134 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96017
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95163}
        #id: 20119
        #name: "ASME PTC 4.2-1969 (R2016)"
        #slug: "asme-ptc-4-2-1969-r2016-asmec0000q-1969-520193"
        #description: "The purpose of this code is to establish procedures for conducting performance tests to determine: Capacity, Fineness of product, Raw coal feed, Grindability, Moisture, Sizing, Power consumption and Effect of changes in raw coal Characteristics on product fineness, pulverizer capacity, and power consumption. Effect of changes in pulverizer component settings on product fineness, pulverizer capacity, and power consumption. This Code applies to the pulverizing system as a whole, including all the component parts necessary to take the raw coal, hot air and tempering air at the system inlet, and deliver pulverized coal in proper mixture with air and/or flue gas at the desired temperature at the outlet of the system."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Coal Pulverizers"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95151 …}
    #channels: Doctrine\ORM\PersistentCollection {#95155 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95150 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95153 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95138 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95166
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @-31539600 {#95165
      date: 1969-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @-31539600 {#95164
      date: 1969-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.4.2"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#95141 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95136 …}
  }
]

[
  "showFullLabel" => false
]

App\Twig\Components\ProductState {#96024
  +product: App\Entity\Product\Product {#95163
    #id: 5037
    #code: "ASMEC0000Q_1969"
    #attributes: Doctrine\ORM\PersistentCollection {#95157 …}
    #variants: Doctrine\ORM\PersistentCollection {#95159 …}
    #options: Doctrine\ORM\PersistentCollection {#95194 …}
    #associations: Doctrine\ORM\PersistentCollection {#95161 …}
    #createdAt: DateTime @1751033612 {#95168
      date: 2025-06-27 16:13:32.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95167
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95134 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96017
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95163}
        #id: 20119
        #name: "ASME PTC 4.2-1969 (R2016)"
        #slug: "asme-ptc-4-2-1969-r2016-asmec0000q-1969-520193"
        #description: "The purpose of this code is to establish procedures for conducting performance tests to determine: Capacity, Fineness of product, Raw coal feed, Grindability, Moisture, Sizing, Power consumption and Effect of changes in raw coal Characteristics on product fineness, pulverizer capacity, and power consumption. Effect of changes in pulverizer component settings on product fineness, pulverizer capacity, and power consumption. This Code applies to the pulverizing system as a whole, including all the component parts necessary to take the raw coal, hot air and tempering air at the system inlet, and deliver pulverized coal in proper mixture with air and/or flue gas at the desired temperature at the outlet of the system."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Coal Pulverizers"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95151 …}
    #channels: Doctrine\ORM\PersistentCollection {#95155 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95150 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95153 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95138 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95166
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @-31539600 {#95165
      date: 1969-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @-31539600 {#95164
      date: 1969-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.4.2"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#95141 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95136 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1831 …}
}

[
  "product" => App\Entity\Product\Product {#95163
    #id: 5037
    #code: "ASMEC0000Q_1969"
    #attributes: Doctrine\ORM\PersistentCollection {#95157 …}
    #variants: Doctrine\ORM\PersistentCollection {#95159 …}
    #options: Doctrine\ORM\PersistentCollection {#95194 …}
    #associations: Doctrine\ORM\PersistentCollection {#95161 …}
    #createdAt: DateTime @1751033612 {#95168
      date: 2025-06-27 16:13:32.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95167
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95134 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96017
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95163}
        #id: 20119
        #name: "ASME PTC 4.2-1969 (R2016)"
        #slug: "asme-ptc-4-2-1969-r2016-asmec0000q-1969-520193"
        #description: "The purpose of this code is to establish procedures for conducting performance tests to determine: Capacity, Fineness of product, Raw coal feed, Grindability, Moisture, Sizing, Power consumption and Effect of changes in raw coal Characteristics on product fineness, pulverizer capacity, and power consumption. Effect of changes in pulverizer component settings on product fineness, pulverizer capacity, and power consumption. This Code applies to the pulverizing system as a whole, including all the component parts necessary to take the raw coal, hot air and tempering air at the system inlet, and deliver pulverized coal in proper mixture with air and/or flue gas at the desired temperature at the outlet of the system."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Coal Pulverizers"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95151 …}
    #channels: Doctrine\ORM\PersistentCollection {#95155 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95150 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95153 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95138 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95166
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @-31539600 {#95165
      date: 1969-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @-31539600 {#95164
      date: 1969-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.4.2"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#95141 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95136 …}
  }
]

App\Twig\Components\ProductMostRecent {#96105
  +product: App\Entity\Product\Product {#95163
    #id: 5037
    #code: "ASMEC0000Q_1969"
    #attributes: Doctrine\ORM\PersistentCollection {#95157 …}
    #variants: Doctrine\ORM\PersistentCollection {#95159 …}
    #options: Doctrine\ORM\PersistentCollection {#95194 …}
    #associations: Doctrine\ORM\PersistentCollection {#95161 …}
    #createdAt: DateTime @1751033612 {#95168
      date: 2025-06-27 16:13:32.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95167
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95134 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96017
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95163}
        #id: 20119
        #name: "ASME PTC 4.2-1969 (R2016)"
        #slug: "asme-ptc-4-2-1969-r2016-asmec0000q-1969-520193"
        #description: "The purpose of this code is to establish procedures for conducting performance tests to determine: Capacity, Fineness of product, Raw coal feed, Grindability, Moisture, Sizing, Power consumption and Effect of changes in raw coal Characteristics on product fineness, pulverizer capacity, and power consumption. Effect of changes in pulverizer component settings on product fineness, pulverizer capacity, and power consumption. This Code applies to the pulverizing system as a whole, including all the component parts necessary to take the raw coal, hot air and tempering air at the system inlet, and deliver pulverized coal in proper mixture with air and/or flue gas at the desired temperature at the outlet of the system."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Coal Pulverizers"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95151 …}
    #channels: Doctrine\ORM\PersistentCollection {#95155 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95150 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95153 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95138 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95166
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @-31539600 {#95165
      date: 1969-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @-31539600 {#95164
      date: 1969-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.4.2"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#95141 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95136 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1831 …}
}

[
  "product" => App\Entity\Product\Product {#95201
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#95218 …}
    #variants: Doctrine\ORM\PersistentCollection {#95220 …}
    #options: Doctrine\ORM\PersistentCollection {#95224 …}
    #associations: Doctrine\ORM\PersistentCollection {#95222 …}
    #createdAt: DateTime @1751033613 {#95196
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95197
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95208 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96230
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95201}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95210 …}
    #channels: Doctrine\ORM\PersistentCollection {#95216 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95212 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95214 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95202 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95198
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#95199
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#95200
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#95204 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95206 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "imageFilter" => "product_listing_thumbnail"
  "additionalClasses" => "h-100 border-0"
  "hasStretchedLink" => true
  "backgroundColor" => "white"
  "hoverType" => "border-black"
]

App\Twig\Components\ProductCard {#96210
  +product: App\Entity\Product\Product {#95201
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#95218 …}
    #variants: Doctrine\ORM\PersistentCollection {#95220 …}
    #options: Doctrine\ORM\PersistentCollection {#95224 …}
    #associations: Doctrine\ORM\PersistentCollection {#95222 …}
    #createdAt: DateTime @1751033613 {#95196
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95197
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95208 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96230
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95201}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95210 …}
    #channels: Doctrine\ORM\PersistentCollection {#95216 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95212 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95214 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95202 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95198
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#95199
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#95200
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#95204 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95206 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "h-100 border-0"
  +linkLabel: ""
  +imageFilter: "product_listing_thumbnail"
  +hasStretchedLink: true
  +backgroundColor: "white"
  +hoverType: "border-black"
}

[
  "product" => App\Entity\Product\Product {#95201
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#95218 …}
    #variants: Doctrine\ORM\PersistentCollection {#95220 …}
    #options: Doctrine\ORM\PersistentCollection {#95224 …}
    #associations: Doctrine\ORM\PersistentCollection {#95222 …}
    #createdAt: DateTime @1751033613 {#95196
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95197
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95208 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96230
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95201}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95210 …}
    #channels: Doctrine\ORM\PersistentCollection {#95216 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95212 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95214 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95202 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95198
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#95199
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#95200
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#95204 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95206 …}
  }
]

[
  "showFullLabel" => false
]

App\Twig\Components\ProductState {#96237
  +product: App\Entity\Product\Product {#95201
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#95218 …}
    #variants: Doctrine\ORM\PersistentCollection {#95220 …}
    #options: Doctrine\ORM\PersistentCollection {#95224 …}
    #associations: Doctrine\ORM\PersistentCollection {#95222 …}
    #createdAt: DateTime @1751033613 {#95196
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95197
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95208 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96230
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95201}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95210 …}
    #channels: Doctrine\ORM\PersistentCollection {#95216 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95212 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95214 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95202 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95198
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#95199
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#95200
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#95204 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95206 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1831 …}
}

[
  "product" => App\Entity\Product\Product {#95201
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#95218 …}
    #variants: Doctrine\ORM\PersistentCollection {#95220 …}
    #options: Doctrine\ORM\PersistentCollection {#95224 …}
    #associations: Doctrine\ORM\PersistentCollection {#95222 …}
    #createdAt: DateTime @1751033613 {#95196
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95197
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95208 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96230
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95201}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95210 …}
    #channels: Doctrine\ORM\PersistentCollection {#95216 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95212 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95214 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95202 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95198
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#95199
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#95200
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#95204 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95206 …}
  }
]

App\Twig\Components\ProductMostRecent {#96318
  +product: App\Entity\Product\Product {#95201
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#95218 …}
    #variants: Doctrine\ORM\PersistentCollection {#95220 …}
    #options: Doctrine\ORM\PersistentCollection {#95224 …}
    #associations: Doctrine\ORM\PersistentCollection {#95222 …}
    #createdAt: DateTime @1751033613 {#95196
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95197
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95208 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96230
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95201}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95210 …}
    #channels: Doctrine\ORM\PersistentCollection {#95216 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95212 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95214 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95202 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95198
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#95199
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#95200
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#95204 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95206 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1831 …}
}

[
  "product" => App\Entity\Product\Product {#95231
    #id: 5040
    #code: "ASMEC0002Q_1982"
    #attributes: Doctrine\ORM\PersistentCollection {#95248 …}
    #variants: Doctrine\ORM\PersistentCollection {#95250 …}
    #options: Doctrine\ORM\PersistentCollection {#95254 …}
    #associations: Doctrine\ORM\PersistentCollection {#95252 …}
    #createdAt: DateTime @1751033615 {#95226
      date: 2025-06-27 16:13:35.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95227
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95238 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96443
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95231}
        #id: 20131
        #name: "ASME PTC 19.10-1982"
        #slug: "asme-ptc-19-10-1982-asmec0002q-1982-520196"
        #description: "There is a newer edition of this document available. This Appendix has been prepared to facilitate the calculation and correction of turbine test results by furnishing numerical examples of the procedures outlined in the Test Code for Steam Turbines (PTC 6 - 1976). The feedwater heating cycles and gland leak-off systems have been simplified by avoiding unnecessarily long or repetitive calculations while still demonstrating the basic principles involved. General guidelines for making these calculations are given."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Appendix A To Test Code For Steam Turbines"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95240 …}
    #channels: Doctrine\ORM\PersistentCollection {#95246 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95242 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95244 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95232 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95228
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @378687600 {#95229
      date: 1982-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @378687600 {#95230
      date: 1982-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.19.10"
    -bookCollection: ""
    -pageCount: 121
    -documents: Doctrine\ORM\PersistentCollection {#95234 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95236 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "imageFilter" => "product_listing_thumbnail"
  "additionalClasses" => "h-100 border-0"
  "hasStretchedLink" => true
  "backgroundColor" => "secondary-lighter"
  "hoverType" => "border-black"
]

App\Twig\Components\ProductCard {#96423
  +product: App\Entity\Product\Product {#95231
    #id: 5040
    #code: "ASMEC0002Q_1982"
    #attributes: Doctrine\ORM\PersistentCollection {#95248 …}
    #variants: Doctrine\ORM\PersistentCollection {#95250 …}
    #options: Doctrine\ORM\PersistentCollection {#95254 …}
    #associations: Doctrine\ORM\PersistentCollection {#95252 …}
    #createdAt: DateTime @1751033615 {#95226
      date: 2025-06-27 16:13:35.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95227
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95238 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96443
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95231}
        #id: 20131
        #name: "ASME PTC 19.10-1982"
        #slug: "asme-ptc-19-10-1982-asmec0002q-1982-520196"
        #description: "There is a newer edition of this document available. This Appendix has been prepared to facilitate the calculation and correction of turbine test results by furnishing numerical examples of the procedures outlined in the Test Code for Steam Turbines (PTC 6 - 1976). The feedwater heating cycles and gland leak-off systems have been simplified by avoiding unnecessarily long or repetitive calculations while still demonstrating the basic principles involved. General guidelines for making these calculations are given."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Appendix A To Test Code For Steam Turbines"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95240 …}
    #channels: Doctrine\ORM\PersistentCollection {#95246 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95242 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95244 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95232 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95228
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @378687600 {#95229
      date: 1982-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @378687600 {#95230
      date: 1982-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.19.10"
    -bookCollection: ""
    -pageCount: 121
    -documents: Doctrine\ORM\PersistentCollection {#95234 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95236 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "h-100 border-0"
  +linkLabel: ""
  +imageFilter: "product_listing_thumbnail"
  +hasStretchedLink: true
  +backgroundColor: "secondary-lighter"
  +hoverType: "border-black"
}

[
  "product" => App\Entity\Product\Product {#95231
    #id: 5040
    #code: "ASMEC0002Q_1982"
    #attributes: Doctrine\ORM\PersistentCollection {#95248 …}
    #variants: Doctrine\ORM\PersistentCollection {#95250 …}
    #options: Doctrine\ORM\PersistentCollection {#95254 …}
    #associations: Doctrine\ORM\PersistentCollection {#95252 …}
    #createdAt: DateTime @1751033615 {#95226
      date: 2025-06-27 16:13:35.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95227
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95238 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96443
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95231}
        #id: 20131
        #name: "ASME PTC 19.10-1982"
        #slug: "asme-ptc-19-10-1982-asmec0002q-1982-520196"
        #description: "There is a newer edition of this document available. This Appendix has been prepared to facilitate the calculation and correction of turbine test results by furnishing numerical examples of the procedures outlined in the Test Code for Steam Turbines (PTC 6 - 1976). The feedwater heating cycles and gland leak-off systems have been simplified by avoiding unnecessarily long or repetitive calculations while still demonstrating the basic principles involved. General guidelines for making these calculations are given."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Appendix A To Test Code For Steam Turbines"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95240 …}
    #channels: Doctrine\ORM\PersistentCollection {#95246 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95242 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95244 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95232 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95228
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @378687600 {#95229
      date: 1982-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @378687600 {#95230
      date: 1982-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.19.10"
    -bookCollection: ""
    -pageCount: 121
    -documents: Doctrine\ORM\PersistentCollection {#95234 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95236 …}
  }
]

[
  "showFullLabel" => false
]

App\Twig\Components\ProductState {#96450
  +product: App\Entity\Product\Product {#95231
    #id: 5040
    #code: "ASMEC0002Q_1982"
    #attributes: Doctrine\ORM\PersistentCollection {#95248 …}
    #variants: Doctrine\ORM\PersistentCollection {#95250 …}
    #options: Doctrine\ORM\PersistentCollection {#95254 …}
    #associations: Doctrine\ORM\PersistentCollection {#95252 …}
    #createdAt: DateTime @1751033615 {#95226
      date: 2025-06-27 16:13:35.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95227
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95238 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96443
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95231}
        #id: 20131
        #name: "ASME PTC 19.10-1982"
        #slug: "asme-ptc-19-10-1982-asmec0002q-1982-520196"
        #description: "There is a newer edition of this document available. This Appendix has been prepared to facilitate the calculation and correction of turbine test results by furnishing numerical examples of the procedures outlined in the Test Code for Steam Turbines (PTC 6 - 1976). The feedwater heating cycles and gland leak-off systems have been simplified by avoiding unnecessarily long or repetitive calculations while still demonstrating the basic principles involved. General guidelines for making these calculations are given."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Appendix A To Test Code For Steam Turbines"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95240 …}
    #channels: Doctrine\ORM\PersistentCollection {#95246 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95242 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95244 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95232 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95228
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @378687600 {#95229
      date: 1982-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @378687600 {#95230
      date: 1982-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.19.10"
    -bookCollection: ""
    -pageCount: 121
    -documents: Doctrine\ORM\PersistentCollection {#95234 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95236 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1831 …}
}

[
  "product" => App\Entity\Product\Product {#95231
    #id: 5040
    #code: "ASMEC0002Q_1982"
    #attributes: Doctrine\ORM\PersistentCollection {#95248 …}
    #variants: Doctrine\ORM\PersistentCollection {#95250 …}
    #options: Doctrine\ORM\PersistentCollection {#95254 …}
    #associations: Doctrine\ORM\PersistentCollection {#95252 …}
    #createdAt: DateTime @1751033615 {#95226
      date: 2025-06-27 16:13:35.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95227
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95238 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96443
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95231}
        #id: 20131
        #name: "ASME PTC 19.10-1982"
        #slug: "asme-ptc-19-10-1982-asmec0002q-1982-520196"
        #description: "There is a newer edition of this document available. This Appendix has been prepared to facilitate the calculation and correction of turbine test results by furnishing numerical examples of the procedures outlined in the Test Code for Steam Turbines (PTC 6 - 1976). The feedwater heating cycles and gland leak-off systems have been simplified by avoiding unnecessarily long or repetitive calculations while still demonstrating the basic principles involved. General guidelines for making these calculations are given."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Appendix A To Test Code For Steam Turbines"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95240 …}
    #channels: Doctrine\ORM\PersistentCollection {#95246 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95242 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95244 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95232 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95228
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @378687600 {#95229
      date: 1982-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @378687600 {#95230
      date: 1982-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.19.10"
    -bookCollection: ""
    -pageCount: 121
    -documents: Doctrine\ORM\PersistentCollection {#95234 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95236 …}
  }
]

App\Twig\Components\ProductMostRecent {#96527
  +product: App\Entity\Product\Product {#95231
    #id: 5040
    #code: "ASMEC0002Q_1982"
    #attributes: Doctrine\ORM\PersistentCollection {#95248 …}
    #variants: Doctrine\ORM\PersistentCollection {#95250 …}
    #options: Doctrine\ORM\PersistentCollection {#95254 …}
    #associations: Doctrine\ORM\PersistentCollection {#95252 …}
    #createdAt: DateTime @1751033615 {#95226
      date: 2025-06-27 16:13:35.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95227
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95238 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96443
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95231}
        #id: 20131
        #name: "ASME PTC 19.10-1982"
        #slug: "asme-ptc-19-10-1982-asmec0002q-1982-520196"
        #description: "There is a newer edition of this document available. This Appendix has been prepared to facilitate the calculation and correction of turbine test results by furnishing numerical examples of the procedures outlined in the Test Code for Steam Turbines (PTC 6 - 1976). The feedwater heating cycles and gland leak-off systems have been simplified by avoiding unnecessarily long or repetitive calculations while still demonstrating the basic principles involved. General guidelines for making these calculations are given."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Appendix A To Test Code For Steam Turbines"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95240 …}
    #channels: Doctrine\ORM\PersistentCollection {#95246 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95242 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95244 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95232 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95228
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @378687600 {#95229
      date: 1982-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @378687600 {#95230
      date: 1982-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.19.10"
    -bookCollection: ""
    -pageCount: 121
    -documents: Doctrine\ORM\PersistentCollection {#95234 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95236 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1831 …}
}

[
  "product" => App\Entity\Product\Product {#95261
    #id: 5041
    #code: "ASMEC0002R_1973"
    #attributes: Doctrine\ORM\PersistentCollection {#95278 …}
    #variants: Doctrine\ORM\PersistentCollection {#95280 …}
    #options: Doctrine\ORM\PersistentCollection {#95284 …}
    #associations: Doctrine\ORM\PersistentCollection {#95282 …}
    #createdAt: DateTime @1751033615 {#95256
      date: 2025-06-27 16:13:35.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95257
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95268 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96652
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95261}
        #id: 20135
        #name: "ASME PTC 17-1973 (R2023)"
        #slug: "asme-ptc-17-1973-r2023-asmec0002r-1973-520197"
        #description: "This Code provides rules for testing, and for the computation and tabulation of the results of tests for all types of reciprocating internal combustion engines, in order to determine power and fuel consumption. The objects of testing under this Code is the determination of: (a) Net power output; and (b) Rate of fuel consumption and/or energy input. Application of this Code is limited to engine assemblies as defined by Code Engine Assembly: In the absence of specified stipulations the engine assembly to be tested shall consist of the engine complete with essential apparatus for self sustained continuous operation. Generally these consist of the equipment required for: fuel introduction, air induction, (i.e. scavenging or supercharging), ignition, lubrication, and primary engine and charge air cooling."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Reciprocating Internal-Combustion Engines"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95270 …}
    #channels: Doctrine\ORM\PersistentCollection {#95276 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95272 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95274 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95262 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95258
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @94690800 {#95259
      date: 1973-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @818377200 {#95260
      date: 1995-12-08 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.17"
    -bookCollection: ""
    -pageCount: 40
    -documents: Doctrine\ORM\PersistentCollection {#95264 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95266 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "imageFilter" => "product_listing_thumbnail"
  "additionalClasses" => "h-100 border-0"
  "hasStretchedLink" => true
  "backgroundColor" => "white"
  "hoverType" => "border-black"
]

App\Twig\Components\ProductCard {#96632
  +product: App\Entity\Product\Product {#95261
    #id: 5041
    #code: "ASMEC0002R_1973"
    #attributes: Doctrine\ORM\PersistentCollection {#95278 …}
    #variants: Doctrine\ORM\PersistentCollection {#95280 …}
    #options: Doctrine\ORM\PersistentCollection {#95284 …}
    #associations: Doctrine\ORM\PersistentCollection {#95282 …}
    #createdAt: DateTime @1751033615 {#95256
      date: 2025-06-27 16:13:35.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95257
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95268 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96652
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95261}
        #id: 20135
        #name: "ASME PTC 17-1973 (R2023)"
        #slug: "asme-ptc-17-1973-r2023-asmec0002r-1973-520197"
        #description: "This Code provides rules for testing, and for the computation and tabulation of the results of tests for all types of reciprocating internal combustion engines, in order to determine power and fuel consumption. The objects of testing under this Code is the determination of: (a) Net power output; and (b) Rate of fuel consumption and/or energy input. Application of this Code is limited to engine assemblies as defined by Code Engine Assembly: In the absence of specified stipulations the engine assembly to be tested shall consist of the engine complete with essential apparatus for self sustained continuous operation. Generally these consist of the equipment required for: fuel introduction, air induction, (i.e. scavenging or supercharging), ignition, lubrication, and primary engine and charge air cooling."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Reciprocating Internal-Combustion Engines"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95270 …}
    #channels: Doctrine\ORM\PersistentCollection {#95276 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95272 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95274 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95262 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95258
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @94690800 {#95259
      date: 1973-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @818377200 {#95260
      date: 1995-12-08 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.17"
    -bookCollection: ""
    -pageCount: 40
    -documents: Doctrine\ORM\PersistentCollection {#95264 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95266 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "h-100 border-0"
  +linkLabel: ""
  +imageFilter: "product_listing_thumbnail"
  +hasStretchedLink: true
  +backgroundColor: "white"
  +hoverType: "border-black"
}

[
  "product" => App\Entity\Product\Product {#95261
    #id: 5041
    #code: "ASMEC0002R_1973"
    #attributes: Doctrine\ORM\PersistentCollection {#95278 …}
    #variants: Doctrine\ORM\PersistentCollection {#95280 …}
    #options: Doctrine\ORM\PersistentCollection {#95284 …}
    #associations: Doctrine\ORM\PersistentCollection {#95282 …}
    #createdAt: DateTime @1751033615 {#95256
      date: 2025-06-27 16:13:35.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95257
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95268 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96652
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95261}
        #id: 20135
        #name: "ASME PTC 17-1973 (R2023)"
        #slug: "asme-ptc-17-1973-r2023-asmec0002r-1973-520197"
        #description: "This Code provides rules for testing, and for the computation and tabulation of the results of tests for all types of reciprocating internal combustion engines, in order to determine power and fuel consumption. The objects of testing under this Code is the determination of: (a) Net power output; and (b) Rate of fuel consumption and/or energy input. Application of this Code is limited to engine assemblies as defined by Code Engine Assembly: In the absence of specified stipulations the engine assembly to be tested shall consist of the engine complete with essential apparatus for self sustained continuous operation. Generally these consist of the equipment required for: fuel introduction, air induction, (i.e. scavenging or supercharging), ignition, lubrication, and primary engine and charge air cooling."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Reciprocating Internal-Combustion Engines"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95270 …}
    #channels: Doctrine\ORM\PersistentCollection {#95276 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95272 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95274 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95262 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95258
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @94690800 {#95259
      date: 1973-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @818377200 {#95260
      date: 1995-12-08 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.17"
    -bookCollection: ""
    -pageCount: 40
    -documents: Doctrine\ORM\PersistentCollection {#95264 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95266 …}
  }
]

[
  "showFullLabel" => false
]

App\Twig\Components\ProductState {#96659
  +product: App\Entity\Product\Product {#95261
    #id: 5041
    #code: "ASMEC0002R_1973"
    #attributes: Doctrine\ORM\PersistentCollection {#95278 …}
    #variants: Doctrine\ORM\PersistentCollection {#95280 …}
    #options: Doctrine\ORM\PersistentCollection {#95284 …}
    #associations: Doctrine\ORM\PersistentCollection {#95282 …}
    #createdAt: DateTime @1751033615 {#95256
      date: 2025-06-27 16:13:35.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95257
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95268 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96652
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95261}
        #id: 20135
        #name: "ASME PTC 17-1973 (R2023)"
        #slug: "asme-ptc-17-1973-r2023-asmec0002r-1973-520197"
        #description: "This Code provides rules for testing, and for the computation and tabulation of the results of tests for all types of reciprocating internal combustion engines, in order to determine power and fuel consumption. The objects of testing under this Code is the determination of: (a) Net power output; and (b) Rate of fuel consumption and/or energy input. Application of this Code is limited to engine assemblies as defined by Code Engine Assembly: In the absence of specified stipulations the engine assembly to be tested shall consist of the engine complete with essential apparatus for self sustained continuous operation. Generally these consist of the equipment required for: fuel introduction, air induction, (i.e. scavenging or supercharging), ignition, lubrication, and primary engine and charge air cooling."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Reciprocating Internal-Combustion Engines"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95270 …}
    #channels: Doctrine\ORM\PersistentCollection {#95276 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95272 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95274 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95262 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95258
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @94690800 {#95259
      date: 1973-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @818377200 {#95260
      date: 1995-12-08 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.17"
    -bookCollection: ""
    -pageCount: 40
    -documents: Doctrine\ORM\PersistentCollection {#95264 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95266 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1831 …}
}

[
  "product" => App\Entity\Product\Product {#95261
    #id: 5041
    #code: "ASMEC0002R_1973"
    #attributes: Doctrine\ORM\PersistentCollection {#95278 …}
    #variants: Doctrine\ORM\PersistentCollection {#95280 …}
    #options: Doctrine\ORM\PersistentCollection {#95284 …}
    #associations: Doctrine\ORM\PersistentCollection {#95282 …}
    #createdAt: DateTime @1751033615 {#95256
      date: 2025-06-27 16:13:35.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95257
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95268 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96652
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95261}
        #id: 20135
        #name: "ASME PTC 17-1973 (R2023)"
        #slug: "asme-ptc-17-1973-r2023-asmec0002r-1973-520197"
        #description: "This Code provides rules for testing, and for the computation and tabulation of the results of tests for all types of reciprocating internal combustion engines, in order to determine power and fuel consumption. The objects of testing under this Code is the determination of: (a) Net power output; and (b) Rate of fuel consumption and/or energy input. Application of this Code is limited to engine assemblies as defined by Code Engine Assembly: In the absence of specified stipulations the engine assembly to be tested shall consist of the engine complete with essential apparatus for self sustained continuous operation. Generally these consist of the equipment required for: fuel introduction, air induction, (i.e. scavenging or supercharging), ignition, lubrication, and primary engine and charge air cooling."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Reciprocating Internal-Combustion Engines"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95270 …}
    #channels: Doctrine\ORM\PersistentCollection {#95276 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95272 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95274 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95262 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95258
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @94690800 {#95259
      date: 1973-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @818377200 {#95260
      date: 1995-12-08 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.17"
    -bookCollection: ""
    -pageCount: 40
    -documents: Doctrine\ORM\PersistentCollection {#95264 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95266 …}
  }
]

App\Twig\Components\ProductMostRecent {#96740
  +product: App\Entity\Product\Product {#95261
    #id: 5041
    #code: "ASMEC0002R_1973"
    #attributes: Doctrine\ORM\PersistentCollection {#95278 …}
    #variants: Doctrine\ORM\PersistentCollection {#95280 …}
    #options: Doctrine\ORM\PersistentCollection {#95284 …}
    #associations: Doctrine\ORM\PersistentCollection {#95282 …}
    #createdAt: DateTime @1751033615 {#95256
      date: 2025-06-27 16:13:35.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95257
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95268 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96652
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95261}
        #id: 20135
        #name: "ASME PTC 17-1973 (R2023)"
        #slug: "asme-ptc-17-1973-r2023-asmec0002r-1973-520197"
        #description: "This Code provides rules for testing, and for the computation and tabulation of the results of tests for all types of reciprocating internal combustion engines, in order to determine power and fuel consumption. The objects of testing under this Code is the determination of: (a) Net power output; and (b) Rate of fuel consumption and/or energy input. Application of this Code is limited to engine assemblies as defined by Code Engine Assembly: In the absence of specified stipulations the engine assembly to be tested shall consist of the engine complete with essential apparatus for self sustained continuous operation. Generally these consist of the equipment required for: fuel introduction, air induction, (i.e. scavenging or supercharging), ignition, lubrication, and primary engine and charge air cooling."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Reciprocating Internal-Combustion Engines"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95270 …}
    #channels: Doctrine\ORM\PersistentCollection {#95276 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95272 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95274 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95262 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95258
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @94690800 {#95259
      date: 1973-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @818377200 {#95260
      date: 1995-12-08 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.17"
    -bookCollection: ""
    -pageCount: 40
    -documents: Doctrine\ORM\PersistentCollection {#95264 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95266 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1831 …}
}

[
  "product" => App\Entity\Product\Product {#95291
    #id: 5044
    #code: "ASMEC0004Q_1980"
    #attributes: Doctrine\ORM\PersistentCollection {#95308 …}
    #variants: Doctrine\ORM\PersistentCollection {#95310 …}
    #options: Doctrine\ORM\PersistentCollection {#95314 …}
    #associations: Doctrine\ORM\PersistentCollection {#95312 …}
    #createdAt: DateTime @1751033618 {#95286
      date: 2025-06-27 16:13:38.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95287
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95298 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96865
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95291}
        #id: 20147
        #name: "ASME PTC 19.23-1980"
        #slug: "asme-ptc-19-23-1980-asmec0004q-1980-520200"
        #description: "This Standard provides guidance for the design and application of models by those concerned with the extension or supplementation of prototype tests of equipment using ASME Performance Test Codes. Where there are test codes in existence covering specific equipment, the guiding principles, instruments and methods of measurement from such codes shall be used with only such modifications as become necessary by virtue of the fact that a model is being tested instead of a prototype. A model is a device, machine, structure or system which can be used to predict the behavior of an actual and similar device, machine, structure or system which is called the prototype. A physical model may be smaller than, the same size as, or larger than the prototype. PTC 19.23 consists of (a) General discussion of model testing; (b) Example problems; and (c) Theoretical background."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Guidance Manual for Model Testing"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95300 …}
    #channels: Doctrine\ORM\PersistentCollection {#95306 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95302 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95304 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95292 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95288
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @315529200 {#95289
      date: 1980-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @315529200 {#95290
      date: 1980-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.19.23"
    -bookCollection: ""
    -pageCount: 76
    -documents: Doctrine\ORM\PersistentCollection {#95294 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95296 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "imageFilter" => "product_listing_thumbnail"
  "additionalClasses" => "h-100 border-0"
  "hasStretchedLink" => true
  "backgroundColor" => "secondary-lighter"
  "hoverType" => "border-black"
]

App\Twig\Components\ProductCard {#96845
  +product: App\Entity\Product\Product {#95291
    #id: 5044
    #code: "ASMEC0004Q_1980"
    #attributes: Doctrine\ORM\PersistentCollection {#95308 …}
    #variants: Doctrine\ORM\PersistentCollection {#95310 …}
    #options: Doctrine\ORM\PersistentCollection {#95314 …}
    #associations: Doctrine\ORM\PersistentCollection {#95312 …}
    #createdAt: DateTime @1751033618 {#95286
      date: 2025-06-27 16:13:38.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95287
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95298 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96865
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95291}
        #id: 20147
        #name: "ASME PTC 19.23-1980"
        #slug: "asme-ptc-19-23-1980-asmec0004q-1980-520200"
        #description: "This Standard provides guidance for the design and application of models by those concerned with the extension or supplementation of prototype tests of equipment using ASME Performance Test Codes. Where there are test codes in existence covering specific equipment, the guiding principles, instruments and methods of measurement from such codes shall be used with only such modifications as become necessary by virtue of the fact that a model is being tested instead of a prototype. A model is a device, machine, structure or system which can be used to predict the behavior of an actual and similar device, machine, structure or system which is called the prototype. A physical model may be smaller than, the same size as, or larger than the prototype. PTC 19.23 consists of (a) General discussion of model testing; (b) Example problems; and (c) Theoretical background."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Guidance Manual for Model Testing"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95300 …}
    #channels: Doctrine\ORM\PersistentCollection {#95306 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95302 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95304 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95292 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95288
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @315529200 {#95289
      date: 1980-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @315529200 {#95290
      date: 1980-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.19.23"
    -bookCollection: ""
    -pageCount: 76
    -documents: Doctrine\ORM\PersistentCollection {#95294 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95296 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "h-100 border-0"
  +linkLabel: ""
  +imageFilter: "product_listing_thumbnail"
  +hasStretchedLink: true
  +backgroundColor: "secondary-lighter"
  +hoverType: "border-black"
}

[
  "product" => App\Entity\Product\Product {#95291
    #id: 5044
    #code: "ASMEC0004Q_1980"
    #attributes: Doctrine\ORM\PersistentCollection {#95308 …}
    #variants: Doctrine\ORM\PersistentCollection {#95310 …}
    #options: Doctrine\ORM\PersistentCollection {#95314 …}
    #associations: Doctrine\ORM\PersistentCollection {#95312 …}
    #createdAt: DateTime @1751033618 {#95286
      date: 2025-06-27 16:13:38.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95287
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95298 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96865
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95291}
        #id: 20147
        #name: "ASME PTC 19.23-1980"
        #slug: "asme-ptc-19-23-1980-asmec0004q-1980-520200"
        #description: "This Standard provides guidance for the design and application of models by those concerned with the extension or supplementation of prototype tests of equipment using ASME Performance Test Codes. Where there are test codes in existence covering specific equipment, the guiding principles, instruments and methods of measurement from such codes shall be used with only such modifications as become necessary by virtue of the fact that a model is being tested instead of a prototype. A model is a device, machine, structure or system which can be used to predict the behavior of an actual and similar device, machine, structure or system which is called the prototype. A physical model may be smaller than, the same size as, or larger than the prototype. PTC 19.23 consists of (a) General discussion of model testing; (b) Example problems; and (c) Theoretical background."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Guidance Manual for Model Testing"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95300 …}
    #channels: Doctrine\ORM\PersistentCollection {#95306 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95302 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95304 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95292 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95288
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @315529200 {#95289
      date: 1980-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @315529200 {#95290
      date: 1980-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.19.23"
    -bookCollection: ""
    -pageCount: 76
    -documents: Doctrine\ORM\PersistentCollection {#95294 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95296 …}
  }
]

[
  "showFullLabel" => false
]

App\Twig\Components\ProductState {#96872
  +product: App\Entity\Product\Product {#95291
    #id: 5044
    #code: "ASMEC0004Q_1980"
    #attributes: Doctrine\ORM\PersistentCollection {#95308 …}
    #variants: Doctrine\ORM\PersistentCollection {#95310 …}
    #options: Doctrine\ORM\PersistentCollection {#95314 …}
    #associations: Doctrine\ORM\PersistentCollection {#95312 …}
    #createdAt: DateTime @1751033618 {#95286
      date: 2025-06-27 16:13:38.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#95287
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#95298 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#96865
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#95291}
        #id: 20147
        #name: "ASME PTC 19.23-1980"
        #slug: "asme-ptc-19-23-1980-asmec0004q-1980-520200"
        #description: "This Standard provides guidance for the design and application of models by those concerned with the extension or supplementation of prototype tests of equipment using ASME Performance Test Codes. Where there are test codes in existence covering specific equipment, the guiding principles, instruments and methods of measurement from such codes shall be used with only such modifications as become necessary by virtue of the fact that a model is being tested instead of a prototype. A model is a device, machine, structure or system which can be used to predict the behavior of an actual and similar device, machine, structure or system which is called the prototype. A physical model may be smaller than, the same size as, or larger than the prototype. PTC 19.23 consists of (a) General discussion of model testing; (b) Example problems; and (c) Theoretical background."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Guidance Manual for Model Testing"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#95300 …}
    #channels: Doctrine\ORM\PersistentCollection {#95306 …}
    #mainTaxon: App\Entity\Taxonomy\Taxon {#8892 …}
    #reviews: Doctrine\ORM\PersistentCollection {#95302 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#95304 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#95193 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#95292 …}
    -apiLastModifiedAt: DateTime @1757973600 {#95288
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @315529200 {#95289
      date: 1980-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @315529200 {#95290
      date: 1980-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.19.23"
    -bookCollection: ""
    -pageCount: 76
    -documents: Doctrine\ORM\PersistentCollection {#95294 …}
    -favorites: Doctrine\ORM\PersistentCollection {#95296 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1831 …}
}