GET https://dev.normadoc.fr/_partial/products/cross-sell?limit=2&products=%5B9423%5D&template=%40SyliusShop%2FProduct%2FsimilarList.html.twig

Response
200 OK
IP
216.73.217.22
Profiled on
Token
b5716e

Components

4 Twig Components
15 Render Count
26 ms Render Time
486.0 MiB Memory Usage

Components

Name Metadata Render Count Render Time
ProductState 
"App\Twig\Components\ProductState"
components/ProductState.html.twig 		6 3.39ms
ProductMostRecent 
"App\Twig\Components\ProductMostRecent"
components/ProductMostRecent.html.twig 		6 5.49ms
ProductCard 
"App\Twig\Components\ProductCard"
components/ProductCard.html.twig 		2 18.71ms
ProductType 
"App\Twig\Components\ProductType"
components/ProductType.html.twig 		1 0.65ms

Render calls

ProductState App\Twig\Components\ProductState 486.0 MiB 2.30 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7311
    #id: 9423
    #code: "IEEE00002300"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038252 {#7274
      date: 2025-06-27 17:30:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#7322
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 32701
        #name: "IEEE 1562:2007"
        #slug: "ieee-1562-2007-ieee00002300-241075"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          A method for properly sizing the PV array and battery for stand-alone PV systems where PV is the only charging source is recommended (in conjunction with IEEE Std 1013(TM)). Load calculations and determination of solar radiation in the sizing of the system need special attention. Additionally, the critical nature of the load in deciding an acceptable annual availability needs to be considered.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1630447200 {#7292
      date: 2021-09-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1210543200 {#7318
      date: 2008-05-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#7316
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#92939
  +product: App\Entity\Product\Product {#7311
    #id: 9423
    #code: "IEEE00002300"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038252 {#7274
      date: 2025-06-27 17:30:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#7322
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 32701
        #name: "IEEE 1562:2007"
        #slug: "ieee-1562-2007-ieee00002300-241075"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          A method for properly sizing the PV array and battery for stand-alone PV systems where PV is the only charging source is recommended (in conjunction with IEEE Std 1013(TM)). Load calculations and determination of solar radiation in the sizing of the system need special attention. Additionally, the critical nature of the load in deciding an acceptable annual availability needs to be considered.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1630447200 {#7292
      date: 2021-09-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1210543200 {#7318
      date: 2008-05-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#7316
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +appearance: "state-withdrawn"
  +labels: [
    "Withdrawn"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductType App\Twig\Components\ProductType 486.0 MiB 0.65 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7311
    #id: 9423
    #code: "IEEE00002300"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038252 {#7274
      date: 2025-06-27 17:30:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#7322
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 32701
        #name: "IEEE 1562:2007"
        #slug: "ieee-1562-2007-ieee00002300-241075"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          A method for properly sizing the PV array and battery for stand-alone PV systems where PV is the only charging source is recommended (in conjunction with IEEE Std 1013(TM)). Load calculations and determination of solar radiation in the sizing of the system need special attention. Additionally, the critical nature of the load in deciding an acceptable annual availability needs to be considered.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1630447200 {#7292
      date: 2021-09-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1210543200 {#7318
      date: 2008-05-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#7316
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductType {#93110
  +product: App\Entity\Product\Product {#7311
    #id: 9423
    #code: "IEEE00002300"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038252 {#7274
      date: 2025-06-27 17:30:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#7322
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 32701
        #name: "IEEE 1562:2007"
        #slug: "ieee-1562-2007-ieee00002300-241075"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          A method for properly sizing the PV array and battery for stand-alone PV systems where PV is the only charging source is recommended (in conjunction with IEEE Std 1013(TM)). Load calculations and determination of solar radiation in the sizing of the system need special attention. Additionally, the critical nature of the load in deciding an acceptable annual availability needs to be considered.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1630447200 {#7292
      date: 2021-09-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1210543200 {#7318
      date: 2008-05-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#7316
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Standard"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 486.0 MiB 1.38 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7311
    #id: 9423
    #code: "IEEE00002300"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038252 {#7274
      date: 2025-06-27 17:30:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#7322
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 32701
        #name: "IEEE 1562:2007"
        #slug: "ieee-1562-2007-ieee00002300-241075"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          A method for properly sizing the PV array and battery for stand-alone PV systems where PV is the only charging source is recommended (in conjunction with IEEE Std 1013(TM)). Load calculations and determination of solar radiation in the sizing of the system need special attention. Additionally, the critical nature of the load in deciding an acceptable annual availability needs to be considered.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1630447200 {#7292
      date: 2021-09-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1210543200 {#7318
      date: 2008-05-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#7316
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#93185
  +product: App\Entity\Product\Product {#7311
    #id: 9423
    #code: "IEEE00002300"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038252 {#7274
      date: 2025-06-27 17:30:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#7322
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 32701
        #name: "IEEE 1562:2007"
        #slug: "ieee-1562-2007-ieee00002300-241075"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          A method for properly sizing the PV array and battery for stand-alone PV systems where PV is the only charging source is recommended (in conjunction with IEEE Std 1013(TM)). Load calculations and determination of solar radiation in the sizing of the system need special attention. Additionally, the critical nature of the load in deciding an acceptable annual availability needs to be considered.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1630447200 {#7292
      date: 2021-09-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1210543200 {#7318
      date: 2008-05-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#7316
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductState App\Twig\Components\ProductState 486.0 MiB 0.22 ms
Input props 
[
  "product" => App\Entity\Product\Product {#93612
    #id: 12151
    #code: "IEEE00007168"
    #attributes: Doctrine\ORM\PersistentCollection {#93594 …}
    #variants: Doctrine\ORM\PersistentCollection {#93591 …}
    #options: Doctrine\ORM\PersistentCollection {#93587 …}
    #associations: Doctrine\ORM\PersistentCollection {#93589 …}
    #createdAt: DateTime @1751040234 {#93620
      date: 2025-06-27 18:03:54.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93599
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93605 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93640
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93612}
        #id: 43613
        #name: "IEEE 1562"
        #slug: "ieee-1562-ieee00007168-243804"
        #description: """
          Revision Standard - Superseded.<br />\n
          Information to assist in sizing the array and battery of a stand-alone photovoltaic (PV) system is provided by this guide. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter). This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93603 …}
    #channels: Doctrine\ORM\PersistentCollection {#93596 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93601 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93598 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93613 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93583
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1600207200 {#93619
      date: 2020-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1658440800 {#93618
      date: 2022-07-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 33
    -documents: Doctrine\ORM\PersistentCollection {#93609 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93607 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#106805
  +product: App\Entity\Product\Product {#93612
    #id: 12151
    #code: "IEEE00007168"
    #attributes: Doctrine\ORM\PersistentCollection {#93594 …}
    #variants: Doctrine\ORM\PersistentCollection {#93591 …}
    #options: Doctrine\ORM\PersistentCollection {#93587 …}
    #associations: Doctrine\ORM\PersistentCollection {#93589 …}
    #createdAt: DateTime @1751040234 {#93620
      date: 2025-06-27 18:03:54.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93599
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93605 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93640
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93612}
        #id: 43613
        #name: "IEEE 1562"
        #slug: "ieee-1562-ieee00007168-243804"
        #description: """
          Revision Standard - Superseded.<br />\n
          Information to assist in sizing the array and battery of a stand-alone photovoltaic (PV) system is provided by this guide. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter). This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93603 …}
    #channels: Doctrine\ORM\PersistentCollection {#93596 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93601 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93598 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93613 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93583
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1600207200 {#93619
      date: 2020-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1658440800 {#93618
      date: 2022-07-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 33
    -documents: Doctrine\ORM\PersistentCollection {#93609 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93607 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 486.0 MiB 0.75 ms
Input props 
[
  "product" => App\Entity\Product\Product {#93612
    #id: 12151
    #code: "IEEE00007168"
    #attributes: Doctrine\ORM\PersistentCollection {#93594 …}
    #variants: Doctrine\ORM\PersistentCollection {#93591 …}
    #options: Doctrine\ORM\PersistentCollection {#93587 …}
    #associations: Doctrine\ORM\PersistentCollection {#93589 …}
    #createdAt: DateTime @1751040234 {#93620
      date: 2025-06-27 18:03:54.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93599
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93605 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93640
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93612}
        #id: 43613
        #name: "IEEE 1562"
        #slug: "ieee-1562-ieee00007168-243804"
        #description: """
          Revision Standard - Superseded.<br />\n
          Information to assist in sizing the array and battery of a stand-alone photovoltaic (PV) system is provided by this guide. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter). This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93603 …}
    #channels: Doctrine\ORM\PersistentCollection {#93596 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93601 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93598 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93613 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93583
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1600207200 {#93619
      date: 2020-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1658440800 {#93618
      date: 2022-07-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 33
    -documents: Doctrine\ORM\PersistentCollection {#93609 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93607 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#106872
  +product: App\Entity\Product\Product {#93612
    #id: 12151
    #code: "IEEE00007168"
    #attributes: Doctrine\ORM\PersistentCollection {#93594 …}
    #variants: Doctrine\ORM\PersistentCollection {#93591 …}
    #options: Doctrine\ORM\PersistentCollection {#93587 …}
    #associations: Doctrine\ORM\PersistentCollection {#93589 …}
    #createdAt: DateTime @1751040234 {#93620
      date: 2025-06-27 18:03:54.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93599
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93605 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93640
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93612}
        #id: 43613
        #name: "IEEE 1562"
        #slug: "ieee-1562-ieee00007168-243804"
        #description: """
          Revision Standard - Superseded.<br />\n
          Information to assist in sizing the array and battery of a stand-alone photovoltaic (PV) system is provided by this guide. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter). This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93603 …}
    #channels: Doctrine\ORM\PersistentCollection {#93596 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93601 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93598 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93613 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93583
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1600207200 {#93619
      date: 2020-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1658440800 {#93618
      date: 2022-07-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 33
    -documents: Doctrine\ORM\PersistentCollection {#93609 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93607 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductState App\Twig\Components\ProductState 486.0 MiB 0.19 ms
Input props 
[
  "product" => App\Entity\Product\Product {#106746
    #id: 12606
    #code: "IEEE00010272"
    #attributes: Doctrine\ORM\PersistentCollection {#106729 …}
    #variants: Doctrine\ORM\PersistentCollection {#106726 …}
    #options: Doctrine\ORM\PersistentCollection {#106722 …}
    #associations: Doctrine\ORM\PersistentCollection {#106724 …}
    #createdAt: DateTime @1751040543 {#106714
      date: 2025-06-27 18:09:03.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#106727
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106740 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106947
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106746}
        #id: 45433
        #name: "IEEE 1562:2021"
        #slug: "ieee-1562-2021-ieee00010272-244261"
        #description: """
          Revision Standard - Active.<br />\n
          Provided in this recommended practice is information to assist in sizing the array and battery of a stand-alone photovoltaic (PV) system. Systems considered in this recommended practice consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or under-charged and may employ a power conversion subsystem (inverter or converter). This recommended practice is applicable to all stand-alone PV systems where PV is the only charging source. This recommended practice does not include PV hybrid systems nor grid-connected systems. This recommended practice covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This recommended practice does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          \t\t\t\t<br />\n
          This recommended practice provides a procedure to size a stand-alone photovoltaic (PV) system. Systems considered in this document consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged and may employ a power conversion subsystem (inverter or converter). The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. This recommended practice is applicable to all stand-alone PV systems where PV is the only charging source. This document does not include PV hybrid2 systems or grid-connected systems. This document is normally intended to be used in conjunction with IEEE Std 1013 when the solar/PV array is paired with a lead-acid battery systems.3 This recommended practice does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this recommended practice is to provide procedures to size the PV system according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Sizing Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106737 …}
    #channels: Doctrine\ORM\PersistentCollection {#106731 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106735 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106733 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106747 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106754
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1642546800 {#106758
      date: 2022-01-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1630620000 {#106712
      date: 2021-09-03 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#106744 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106742 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#106962
  +product: App\Entity\Product\Product {#106746
    #id: 12606
    #code: "IEEE00010272"
    #attributes: Doctrine\ORM\PersistentCollection {#106729 …}
    #variants: Doctrine\ORM\PersistentCollection {#106726 …}
    #options: Doctrine\ORM\PersistentCollection {#106722 …}
    #associations: Doctrine\ORM\PersistentCollection {#106724 …}
    #createdAt: DateTime @1751040543 {#106714
      date: 2025-06-27 18:09:03.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#106727
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106740 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106947
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106746}
        #id: 45433
        #name: "IEEE 1562:2021"
        #slug: "ieee-1562-2021-ieee00010272-244261"
        #description: """
          Revision Standard - Active.<br />\n
          Provided in this recommended practice is information to assist in sizing the array and battery of a stand-alone photovoltaic (PV) system. Systems considered in this recommended practice consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or under-charged and may employ a power conversion subsystem (inverter or converter). This recommended practice is applicable to all stand-alone PV systems where PV is the only charging source. This recommended practice does not include PV hybrid systems nor grid-connected systems. This recommended practice covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This recommended practice does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          \t\t\t\t<br />\n
          This recommended practice provides a procedure to size a stand-alone photovoltaic (PV) system. Systems considered in this document consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged and may employ a power conversion subsystem (inverter or converter). The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. This recommended practice is applicable to all stand-alone PV systems where PV is the only charging source. This document does not include PV hybrid2 systems or grid-connected systems. This document is normally intended to be used in conjunction with IEEE Std 1013 when the solar/PV array is paired with a lead-acid battery systems.3 This recommended practice does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this recommended practice is to provide procedures to size the PV system according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Sizing Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106737 …}
    #channels: Doctrine\ORM\PersistentCollection {#106731 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106735 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106733 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106747 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106754
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1642546800 {#106758
      date: 2022-01-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1630620000 {#106712
      date: 2021-09-03 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#106744 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106742 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 486.0 MiB 0.79 ms
Input props 
[
  "product" => App\Entity\Product\Product {#106746
    #id: 12606
    #code: "IEEE00010272"
    #attributes: Doctrine\ORM\PersistentCollection {#106729 …}
    #variants: Doctrine\ORM\PersistentCollection {#106726 …}
    #options: Doctrine\ORM\PersistentCollection {#106722 …}
    #associations: Doctrine\ORM\PersistentCollection {#106724 …}
    #createdAt: DateTime @1751040543 {#106714
      date: 2025-06-27 18:09:03.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#106727
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106740 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106947
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106746}
        #id: 45433
        #name: "IEEE 1562:2021"
        #slug: "ieee-1562-2021-ieee00010272-244261"
        #description: """
          Revision Standard - Active.<br />\n
          Provided in this recommended practice is information to assist in sizing the array and battery of a stand-alone photovoltaic (PV) system. Systems considered in this recommended practice consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or under-charged and may employ a power conversion subsystem (inverter or converter). This recommended practice is applicable to all stand-alone PV systems where PV is the only charging source. This recommended practice does not include PV hybrid systems nor grid-connected systems. This recommended practice covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This recommended practice does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          \t\t\t\t<br />\n
          This recommended practice provides a procedure to size a stand-alone photovoltaic (PV) system. Systems considered in this document consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged and may employ a power conversion subsystem (inverter or converter). The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. This recommended practice is applicable to all stand-alone PV systems where PV is the only charging source. This document does not include PV hybrid2 systems or grid-connected systems. This document is normally intended to be used in conjunction with IEEE Std 1013 when the solar/PV array is paired with a lead-acid battery systems.3 This recommended practice does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this recommended practice is to provide procedures to size the PV system according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Sizing Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106737 …}
    #channels: Doctrine\ORM\PersistentCollection {#106731 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106735 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106733 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106747 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106754
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1642546800 {#106758
      date: 2022-01-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1630620000 {#106712
      date: 2021-09-03 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#106744 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106742 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#107014
  +product: App\Entity\Product\Product {#106746
    #id: 12606
    #code: "IEEE00010272"
    #attributes: Doctrine\ORM\PersistentCollection {#106729 …}
    #variants: Doctrine\ORM\PersistentCollection {#106726 …}
    #options: Doctrine\ORM\PersistentCollection {#106722 …}
    #associations: Doctrine\ORM\PersistentCollection {#106724 …}
    #createdAt: DateTime @1751040543 {#106714
      date: 2025-06-27 18:09:03.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#106727
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106740 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#106947
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106746}
        #id: 45433
        #name: "IEEE 1562:2021"
        #slug: "ieee-1562-2021-ieee00010272-244261"
        #description: """
          Revision Standard - Active.<br />\n
          Provided in this recommended practice is information to assist in sizing the array and battery of a stand-alone photovoltaic (PV) system. Systems considered in this recommended practice consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or under-charged and may employ a power conversion subsystem (inverter or converter). This recommended practice is applicable to all stand-alone PV systems where PV is the only charging source. This recommended practice does not include PV hybrid systems nor grid-connected systems. This recommended practice covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This recommended practice does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          \t\t\t\t<br />\n
          This recommended practice provides a procedure to size a stand-alone photovoltaic (PV) system. Systems considered in this document consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged and may employ a power conversion subsystem (inverter or converter). The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. This recommended practice is applicable to all stand-alone PV systems where PV is the only charging source. This document does not include PV hybrid2 systems or grid-connected systems. This document is normally intended to be used in conjunction with IEEE Std 1013 when the solar/PV array is paired with a lead-acid battery systems.3 This recommended practice does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this recommended practice is to provide procedures to size the PV system according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Sizing Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106737 …}
    #channels: Doctrine\ORM\PersistentCollection {#106731 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106735 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106733 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106747 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106754
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1642546800 {#106758
      date: 2022-01-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1630620000 {#106712
      date: 2021-09-03 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 35
    -documents: Doctrine\ORM\PersistentCollection {#106744 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106742 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductState App\Twig\Components\ProductState 486.0 MiB 0.22 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7311
    #id: 9423
    #code: "IEEE00002300"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038252 {#7274
      date: 2025-06-27 17:30:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#7322
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 32701
        #name: "IEEE 1562:2007"
        #slug: "ieee-1562-2007-ieee00002300-241075"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          A method for properly sizing the PV array and battery for stand-alone PV systems where PV is the only charging source is recommended (in conjunction with IEEE Std 1013(TM)). Load calculations and determination of solar radiation in the sizing of the system need special attention. Additionally, the critical nature of the load in deciding an acceptable annual availability needs to be considered.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1630447200 {#7292
      date: 2021-09-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1210543200 {#7318
      date: 2008-05-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#7316
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#107078
  +product: App\Entity\Product\Product {#7311
    #id: 9423
    #code: "IEEE00002300"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038252 {#7274
      date: 2025-06-27 17:30:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#7322
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 32701
        #name: "IEEE 1562:2007"
        #slug: "ieee-1562-2007-ieee00002300-241075"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          A method for properly sizing the PV array and battery for stand-alone PV systems where PV is the only charging source is recommended (in conjunction with IEEE Std 1013(TM)). Load calculations and determination of solar radiation in the sizing of the system need special attention. Additionally, the critical nature of the load in deciding an acceptable annual availability needs to be considered.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1630447200 {#7292
      date: 2021-09-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1210543200 {#7318
      date: 2008-05-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#7316
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +appearance: "state-withdrawn"
  +labels: [
    "Withdrawn"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 486.0 MiB 0.78 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7311
    #id: 9423
    #code: "IEEE00002300"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038252 {#7274
      date: 2025-06-27 17:30:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#7322
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 32701
        #name: "IEEE 1562:2007"
        #slug: "ieee-1562-2007-ieee00002300-241075"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          A method for properly sizing the PV array and battery for stand-alone PV systems where PV is the only charging source is recommended (in conjunction with IEEE Std 1013(TM)). Load calculations and determination of solar radiation in the sizing of the system need special attention. Additionally, the critical nature of the load in deciding an acceptable annual availability needs to be considered.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1630447200 {#7292
      date: 2021-09-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1210543200 {#7318
      date: 2008-05-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#7316
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#107105
  +product: App\Entity\Product\Product {#7311
    #id: 9423
    #code: "IEEE00002300"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038252 {#7274
      date: 2025-06-27 17:30:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#7322
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 32701
        #name: "IEEE 1562:2007"
        #slug: "ieee-1562-2007-ieee00002300-241075"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          A method for properly sizing the PV array and battery for stand-alone PV systems where PV is the only charging source is recommended (in conjunction with IEEE Std 1013(TM)). Load calculations and determination of solar radiation in the sizing of the system need special attention. Additionally, the critical nature of the load in deciding an acceptable annual availability needs to be considered.<br />\n
          \t\t\t\t<br />\n
          This guide provides information to assist in sizing the array and battery of a stand-alone photovoltaic system. Systems considered in this guide consist of PV as the only power source and a battery for energy storage. These systems also commonly employ controls to protect the battery from being over- or undercharged, and may employ a power conversion subsystem (inverter or converter).<br />\n
          This guide is applicable to all stand-alone PV systems where PV is the only charging source. This guide does not include PV hybrid systems nor grid-connected systems. This guide covers lead-acid batteries only; nickel-cadmium and other battery types are not included. This guide does not include the sizing of the system controller, inverter, wiring, or other system components.<br />\n
          The purpose of this guide is to provide procedures to size the PV array and battery according to accepted methods, to improve the performance, cost-effectiveness, and lifetimes of stand-alone PV systems. The issues of array utilization, battery-charge efficiency, and system losses are also considered in terms of their effect on system sizing. These procedures are intended to assist designers, manufacturers, system integrators, users, and laboratories with information necessary for sizing, modeling, and evaluating the performance of stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1630447200 {#7292
      date: 2021-09-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1210543200 {#7318
      date: 2008-05-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#7316
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1562"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductCard App\Twig\Components\ProductCard 486.0 MiB 11.34 ms
Input props 
[
  "product" => App\Entity\Product\Product {#128541
    #id: 10055
    #code: "IEEE00003533"
    #attributes: Doctrine\ORM\PersistentCollection {#128546 …}
    #variants: Doctrine\ORM\PersistentCollection {#128544 …}
    #options: Doctrine\ORM\PersistentCollection {#128539 …}
    #associations: Doctrine\ORM\PersistentCollection {#128542 …}
    #createdAt: DateTime @1751038780 {#128535
      date: 2025-06-27 17:39:40.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#128570
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128557 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128677
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128541}
        #id: 35229
        #name: "IEEE 1561:2007"
        #slug: "ieee-1561-2007-ieee00003533-241707"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          This guide is applicable to lead-acid batteries that are used as the energy storage component in remote hybrid power supplies. The remote hybrid application, with its dual generator option, i.e., both renewable and dispatchable generation, is advantageous in that the battery can usually be charged at will and under circumstances that may also be advantageous for the dispatchable generator. The normative references provide guidance to battery safety, installation, and maintenance considerations. This guide discusses battery selection, sizing, and management issues, e.g., cycling, charging, and the effect of temperature and charge-discharge rates on performances such as life and capacity. An informative annex discusses the several lead-acid technologies.<br />\n
          \t\t\t\t<br />\n
          This guide provides rationale and guidance for operating lead-acid batteries in remote hybrid power<br />\n
          systems, taking into consideration system loads and the capacities of the system’s renewable-energy<br />\n
          generator(s), dispatchable generator(s), and battery(s). It also provides guidance for selecting an appropriate lead-acid battery technology for various system operating strategies.<br />\n
          Using the information provided in this guide, the performance and life of the lead-acid battery can be optimized for the particular operational strategy selected for the remote hybrid power system. The information provided is intended for use by remote hybrid system designers, system evaluators, owners and operators.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128555 …}
    #channels: Doctrine\ORM\PersistentCollection {#128548 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128552 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128550 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128562 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128521
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128569
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1210197600 {#128528
      date: 2008-05-08 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1561"
    -bookCollection: ""
    -pageCount: 29
    -documents: Doctrine\ORM\PersistentCollection {#128561 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128559 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "additionalClasses" => "product__teaser--with-grey-border"
  "hasStretchedLink" => true
  "hoverType" => "shadow"
  "linkLabel" => "See more"
]
Attributes 
[]
Component 
App\Twig\Components\ProductCard {#128593
  +product: App\Entity\Product\Product {#128541
    #id: 10055
    #code: "IEEE00003533"
    #attributes: Doctrine\ORM\PersistentCollection {#128546 …}
    #variants: Doctrine\ORM\PersistentCollection {#128544 …}
    #options: Doctrine\ORM\PersistentCollection {#128539 …}
    #associations: Doctrine\ORM\PersistentCollection {#128542 …}
    #createdAt: DateTime @1751038780 {#128535
      date: 2025-06-27 17:39:40.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#128570
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128557 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128677
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128541}
        #id: 35229
        #name: "IEEE 1561:2007"
        #slug: "ieee-1561-2007-ieee00003533-241707"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          This guide is applicable to lead-acid batteries that are used as the energy storage component in remote hybrid power supplies. The remote hybrid application, with its dual generator option, i.e., both renewable and dispatchable generation, is advantageous in that the battery can usually be charged at will and under circumstances that may also be advantageous for the dispatchable generator. The normative references provide guidance to battery safety, installation, and maintenance considerations. This guide discusses battery selection, sizing, and management issues, e.g., cycling, charging, and the effect of temperature and charge-discharge rates on performances such as life and capacity. An informative annex discusses the several lead-acid technologies.<br />\n
          \t\t\t\t<br />\n
          This guide provides rationale and guidance for operating lead-acid batteries in remote hybrid power<br />\n
          systems, taking into consideration system loads and the capacities of the system’s renewable-energy<br />\n
          generator(s), dispatchable generator(s), and battery(s). It also provides guidance for selecting an appropriate lead-acid battery technology for various system operating strategies.<br />\n
          Using the information provided in this guide, the performance and life of the lead-acid battery can be optimized for the particular operational strategy selected for the remote hybrid power system. The information provided is intended for use by remote hybrid system designers, system evaluators, owners and operators.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128555 …}
    #channels: Doctrine\ORM\PersistentCollection {#128548 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128552 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128550 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128562 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128521
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128569
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1210197600 {#128528
      date: 2008-05-08 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1561"
    -bookCollection: ""
    -pageCount: 29
    -documents: Doctrine\ORM\PersistentCollection {#128561 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128559 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "product__teaser--with-grey-border"
  +linkLabel: "See more"
  +imageFilter: "product_thumbnail_teaser"
  +hasStretchedLink: true
  +backgroundColor: "white"
  +hoverType: "shadow"
}
ProductState App\Twig\Components\ProductState 486.0 MiB 0.27 ms
Input props 
[
  "product" => App\Entity\Product\Product {#128541
    #id: 10055
    #code: "IEEE00003533"
    #attributes: Doctrine\ORM\PersistentCollection {#128546 …}
    #variants: Doctrine\ORM\PersistentCollection {#128544 …}
    #options: Doctrine\ORM\PersistentCollection {#128539 …}
    #associations: Doctrine\ORM\PersistentCollection {#128542 …}
    #createdAt: DateTime @1751038780 {#128535
      date: 2025-06-27 17:39:40.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#128570
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128557 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128677
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128541}
        #id: 35229
        #name: "IEEE 1561:2007"
        #slug: "ieee-1561-2007-ieee00003533-241707"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          This guide is applicable to lead-acid batteries that are used as the energy storage component in remote hybrid power supplies. The remote hybrid application, with its dual generator option, i.e., both renewable and dispatchable generation, is advantageous in that the battery can usually be charged at will and under circumstances that may also be advantageous for the dispatchable generator. The normative references provide guidance to battery safety, installation, and maintenance considerations. This guide discusses battery selection, sizing, and management issues, e.g., cycling, charging, and the effect of temperature and charge-discharge rates on performances such as life and capacity. An informative annex discusses the several lead-acid technologies.<br />\n
          \t\t\t\t<br />\n
          This guide provides rationale and guidance for operating lead-acid batteries in remote hybrid power<br />\n
          systems, taking into consideration system loads and the capacities of the system’s renewable-energy<br />\n
          generator(s), dispatchable generator(s), and battery(s). It also provides guidance for selecting an appropriate lead-acid battery technology for various system operating strategies.<br />\n
          Using the information provided in this guide, the performance and life of the lead-acid battery can be optimized for the particular operational strategy selected for the remote hybrid power system. The information provided is intended for use by remote hybrid system designers, system evaluators, owners and operators.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128555 …}
    #channels: Doctrine\ORM\PersistentCollection {#128548 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128552 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128550 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128562 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128521
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128569
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1210197600 {#128528
      date: 2008-05-08 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1561"
    -bookCollection: ""
    -pageCount: 29
    -documents: Doctrine\ORM\PersistentCollection {#128561 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128559 …}
  }
]
Attributes 
[
  "showFullLabel" => false
]
Component 
App\Twig\Components\ProductState {#128681
  +product: App\Entity\Product\Product {#128541
    #id: 10055
    #code: "IEEE00003533"
    #attributes: Doctrine\ORM\PersistentCollection {#128546 …}
    #variants: Doctrine\ORM\PersistentCollection {#128544 …}
    #options: Doctrine\ORM\PersistentCollection {#128539 …}
    #associations: Doctrine\ORM\PersistentCollection {#128542 …}
    #createdAt: DateTime @1751038780 {#128535
      date: 2025-06-27 17:39:40.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#128570
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128557 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128677
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128541}
        #id: 35229
        #name: "IEEE 1561:2007"
        #slug: "ieee-1561-2007-ieee00003533-241707"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          This guide is applicable to lead-acid batteries that are used as the energy storage component in remote hybrid power supplies. The remote hybrid application, with its dual generator option, i.e., both renewable and dispatchable generation, is advantageous in that the battery can usually be charged at will and under circumstances that may also be advantageous for the dispatchable generator. The normative references provide guidance to battery safety, installation, and maintenance considerations. This guide discusses battery selection, sizing, and management issues, e.g., cycling, charging, and the effect of temperature and charge-discharge rates on performances such as life and capacity. An informative annex discusses the several lead-acid technologies.<br />\n
          \t\t\t\t<br />\n
          This guide provides rationale and guidance for operating lead-acid batteries in remote hybrid power<br />\n
          systems, taking into consideration system loads and the capacities of the system’s renewable-energy<br />\n
          generator(s), dispatchable generator(s), and battery(s). It also provides guidance for selecting an appropriate lead-acid battery technology for various system operating strategies.<br />\n
          Using the information provided in this guide, the performance and life of the lead-acid battery can be optimized for the particular operational strategy selected for the remote hybrid power system. The information provided is intended for use by remote hybrid system designers, system evaluators, owners and operators.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128555 …}
    #channels: Doctrine\ORM\PersistentCollection {#128548 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128552 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128550 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128562 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128521
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128569
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1210197600 {#128528
      date: 2008-05-08 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1561"
    -bookCollection: ""
    -pageCount: 29
    -documents: Doctrine\ORM\PersistentCollection {#128561 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128559 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 486.0 MiB 0.99 ms
Input props 
[
  "product" => App\Entity\Product\Product {#128541
    #id: 10055
    #code: "IEEE00003533"
    #attributes: Doctrine\ORM\PersistentCollection {#128546 …}
    #variants: Doctrine\ORM\PersistentCollection {#128544 …}
    #options: Doctrine\ORM\PersistentCollection {#128539 …}
    #associations: Doctrine\ORM\PersistentCollection {#128542 …}
    #createdAt: DateTime @1751038780 {#128535
      date: 2025-06-27 17:39:40.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#128570
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128557 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128677
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128541}
        #id: 35229
        #name: "IEEE 1561:2007"
        #slug: "ieee-1561-2007-ieee00003533-241707"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          This guide is applicable to lead-acid batteries that are used as the energy storage component in remote hybrid power supplies. The remote hybrid application, with its dual generator option, i.e., both renewable and dispatchable generation, is advantageous in that the battery can usually be charged at will and under circumstances that may also be advantageous for the dispatchable generator. The normative references provide guidance to battery safety, installation, and maintenance considerations. This guide discusses battery selection, sizing, and management issues, e.g., cycling, charging, and the effect of temperature and charge-discharge rates on performances such as life and capacity. An informative annex discusses the several lead-acid technologies.<br />\n
          \t\t\t\t<br />\n
          This guide provides rationale and guidance for operating lead-acid batteries in remote hybrid power<br />\n
          systems, taking into consideration system loads and the capacities of the system’s renewable-energy<br />\n
          generator(s), dispatchable generator(s), and battery(s). It also provides guidance for selecting an appropriate lead-acid battery technology for various system operating strategies.<br />\n
          Using the information provided in this guide, the performance and life of the lead-acid battery can be optimized for the particular operational strategy selected for the remote hybrid power system. The information provided is intended for use by remote hybrid system designers, system evaluators, owners and operators.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128555 …}
    #channels: Doctrine\ORM\PersistentCollection {#128548 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128552 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128550 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128562 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128521
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128569
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1210197600 {#128528
      date: 2008-05-08 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1561"
    -bookCollection: ""
    -pageCount: 29
    -documents: Doctrine\ORM\PersistentCollection {#128561 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128559 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#128759
  +product: App\Entity\Product\Product {#128541
    #id: 10055
    #code: "IEEE00003533"
    #attributes: Doctrine\ORM\PersistentCollection {#128546 …}
    #variants: Doctrine\ORM\PersistentCollection {#128544 …}
    #options: Doctrine\ORM\PersistentCollection {#128539 …}
    #associations: Doctrine\ORM\PersistentCollection {#128542 …}
    #createdAt: DateTime @1751038780 {#128535
      date: 2025-06-27 17:39:40.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#128570
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128557 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128677
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128541}
        #id: 35229
        #name: "IEEE 1561:2007"
        #slug: "ieee-1561-2007-ieee00003533-241707"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          This guide is applicable to lead-acid batteries that are used as the energy storage component in remote hybrid power supplies. The remote hybrid application, with its dual generator option, i.e., both renewable and dispatchable generation, is advantageous in that the battery can usually be charged at will and under circumstances that may also be advantageous for the dispatchable generator. The normative references provide guidance to battery safety, installation, and maintenance considerations. This guide discusses battery selection, sizing, and management issues, e.g., cycling, charging, and the effect of temperature and charge-discharge rates on performances such as life and capacity. An informative annex discusses the several lead-acid technologies.<br />\n
          \t\t\t\t<br />\n
          This guide provides rationale and guidance for operating lead-acid batteries in remote hybrid power<br />\n
          systems, taking into consideration system loads and the capacities of the system’s renewable-energy<br />\n
          generator(s), dispatchable generator(s), and battery(s). It also provides guidance for selecting an appropriate lead-acid battery technology for various system operating strategies.<br />\n
          Using the information provided in this guide, the performance and life of the lead-acid battery can be optimized for the particular operational strategy selected for the remote hybrid power system. The information provided is intended for use by remote hybrid system designers, system evaluators, owners and operators.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128555 …}
    #channels: Doctrine\ORM\PersistentCollection {#128548 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128552 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128550 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128562 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128521
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128569
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1210197600 {#128528
      date: 2008-05-08 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1561"
    -bookCollection: ""
    -pageCount: 29
    -documents: Doctrine\ORM\PersistentCollection {#128561 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128559 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductCard App\Twig\Components\ProductCard 486.0 MiB 7.38 ms
Input props 
[
  "product" => App\Entity\Product\Product {#128531
    #id: 10140
    #code: "IEEE00003712"
    #attributes: Doctrine\ORM\PersistentCollection {#128618 …}
    #variants: Doctrine\ORM\PersistentCollection {#128613 …}
    #options: Doctrine\ORM\PersistentCollection {#128609 …}
    #associations: Doctrine\ORM\PersistentCollection {#128612 …}
    #createdAt: DateTime @1751038848 {#128537
      date: 2025-06-27 17:40:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#128536
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128518 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128876
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128531}
        #id: 35569
        #name: "IEEE 1013:2007"
        #slug: "ieee-1013-2007-ieee00003712-241792"
        #description: """
          Revision Standard - Superseded.<br />\n
          A method for determining the energy-capacity requirements (sizing) of both vented and valve-regulated lead-acid batteries used in terrestrial stand-alone photovoltaic (PV) systems is described. Sizing batteries for hybrid or grid-connected PV systems is beyond the scope of this document. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this document. Recommended practices for the remainder of the electrical systems associated with PV installations are also beyond the scope of this document.<br />\n
          \t\t\t\t<br />\n
          This recommended practice describes a method for sizing both vented and valve-regulated lead-acid batteries in stand-alone PV systems. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this recommended practice.<br />\n
          Sizing batteries for hybrid and grid-connected PV systems is beyond the scope of this recommended practice. Recommended practices for the remainder of the electrical systems associated with standalone PV installations are also beyond the scope of this recommended practice.<br />\n
          Sizing examples are given for various representative system applications. Iterative techniques to optimize battery costs, which include consideration of the interrelationship between battery size, PV array size, and weather, are beyond the scope of this recommended practice.<br />\n
          This recommended practice is meant to assist system designers in sizing lead-acid batteries for residential, commercial, and industrial stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128610 …}
    #channels: Doctrine\ORM\PersistentCollection {#128619 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128595 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128573 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128530 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128534
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128533
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1184882400 {#128532
      date: 2007-07-20 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1013"
    -bookCollection: ""
    -pageCount: 55
    -documents: Doctrine\ORM\PersistentCollection {#128527 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128525 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "additionalClasses" => "product__teaser--with-grey-border"
  "hasStretchedLink" => true
  "hoverType" => "shadow"
  "linkLabel" => "See more"
]
Attributes 
[]
Component 
App\Twig\Components\ProductCard {#128834
  +product: App\Entity\Product\Product {#128531
    #id: 10140
    #code: "IEEE00003712"
    #attributes: Doctrine\ORM\PersistentCollection {#128618 …}
    #variants: Doctrine\ORM\PersistentCollection {#128613 …}
    #options: Doctrine\ORM\PersistentCollection {#128609 …}
    #associations: Doctrine\ORM\PersistentCollection {#128612 …}
    #createdAt: DateTime @1751038848 {#128537
      date: 2025-06-27 17:40:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#128536
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128518 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128876
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128531}
        #id: 35569
        #name: "IEEE 1013:2007"
        #slug: "ieee-1013-2007-ieee00003712-241792"
        #description: """
          Revision Standard - Superseded.<br />\n
          A method for determining the energy-capacity requirements (sizing) of both vented and valve-regulated lead-acid batteries used in terrestrial stand-alone photovoltaic (PV) systems is described. Sizing batteries for hybrid or grid-connected PV systems is beyond the scope of this document. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this document. Recommended practices for the remainder of the electrical systems associated with PV installations are also beyond the scope of this document.<br />\n
          \t\t\t\t<br />\n
          This recommended practice describes a method for sizing both vented and valve-regulated lead-acid batteries in stand-alone PV systems. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this recommended practice.<br />\n
          Sizing batteries for hybrid and grid-connected PV systems is beyond the scope of this recommended practice. Recommended practices for the remainder of the electrical systems associated with standalone PV installations are also beyond the scope of this recommended practice.<br />\n
          Sizing examples are given for various representative system applications. Iterative techniques to optimize battery costs, which include consideration of the interrelationship between battery size, PV array size, and weather, are beyond the scope of this recommended practice.<br />\n
          This recommended practice is meant to assist system designers in sizing lead-acid batteries for residential, commercial, and industrial stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128610 …}
    #channels: Doctrine\ORM\PersistentCollection {#128619 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128595 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128573 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128530 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128534
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128533
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1184882400 {#128532
      date: 2007-07-20 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1013"
    -bookCollection: ""
    -pageCount: 55
    -documents: Doctrine\ORM\PersistentCollection {#128527 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128525 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "product__teaser--with-grey-border"
  +linkLabel: "See more"
  +imageFilter: "product_thumbnail_teaser"
  +hasStretchedLink: true
  +backgroundColor: "white"
  +hoverType: "shadow"
}
ProductState App\Twig\Components\ProductState 486.0 MiB 0.19 ms
Input props 
[
  "product" => App\Entity\Product\Product {#128531
    #id: 10140
    #code: "IEEE00003712"
    #attributes: Doctrine\ORM\PersistentCollection {#128618 …}
    #variants: Doctrine\ORM\PersistentCollection {#128613 …}
    #options: Doctrine\ORM\PersistentCollection {#128609 …}
    #associations: Doctrine\ORM\PersistentCollection {#128612 …}
    #createdAt: DateTime @1751038848 {#128537
      date: 2025-06-27 17:40:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#128536
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128518 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128876
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128531}
        #id: 35569
        #name: "IEEE 1013:2007"
        #slug: "ieee-1013-2007-ieee00003712-241792"
        #description: """
          Revision Standard - Superseded.<br />\n
          A method for determining the energy-capacity requirements (sizing) of both vented and valve-regulated lead-acid batteries used in terrestrial stand-alone photovoltaic (PV) systems is described. Sizing batteries for hybrid or grid-connected PV systems is beyond the scope of this document. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this document. Recommended practices for the remainder of the electrical systems associated with PV installations are also beyond the scope of this document.<br />\n
          \t\t\t\t<br />\n
          This recommended practice describes a method for sizing both vented and valve-regulated lead-acid batteries in stand-alone PV systems. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this recommended practice.<br />\n
          Sizing batteries for hybrid and grid-connected PV systems is beyond the scope of this recommended practice. Recommended practices for the remainder of the electrical systems associated with standalone PV installations are also beyond the scope of this recommended practice.<br />\n
          Sizing examples are given for various representative system applications. Iterative techniques to optimize battery costs, which include consideration of the interrelationship between battery size, PV array size, and weather, are beyond the scope of this recommended practice.<br />\n
          This recommended practice is meant to assist system designers in sizing lead-acid batteries for residential, commercial, and industrial stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128610 …}
    #channels: Doctrine\ORM\PersistentCollection {#128619 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128595 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128573 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128530 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128534
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128533
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1184882400 {#128532
      date: 2007-07-20 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1013"
    -bookCollection: ""
    -pageCount: 55
    -documents: Doctrine\ORM\PersistentCollection {#128527 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128525 …}
  }
]
Attributes 
[
  "showFullLabel" => false
]
Component 
App\Twig\Components\ProductState {#128890
  +product: App\Entity\Product\Product {#128531
    #id: 10140
    #code: "IEEE00003712"
    #attributes: Doctrine\ORM\PersistentCollection {#128618 …}
    #variants: Doctrine\ORM\PersistentCollection {#128613 …}
    #options: Doctrine\ORM\PersistentCollection {#128609 …}
    #associations: Doctrine\ORM\PersistentCollection {#128612 …}
    #createdAt: DateTime @1751038848 {#128537
      date: 2025-06-27 17:40:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#128536
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128518 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128876
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128531}
        #id: 35569
        #name: "IEEE 1013:2007"
        #slug: "ieee-1013-2007-ieee00003712-241792"
        #description: """
          Revision Standard - Superseded.<br />\n
          A method for determining the energy-capacity requirements (sizing) of both vented and valve-regulated lead-acid batteries used in terrestrial stand-alone photovoltaic (PV) systems is described. Sizing batteries for hybrid or grid-connected PV systems is beyond the scope of this document. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this document. Recommended practices for the remainder of the electrical systems associated with PV installations are also beyond the scope of this document.<br />\n
          \t\t\t\t<br />\n
          This recommended practice describes a method for sizing both vented and valve-regulated lead-acid batteries in stand-alone PV systems. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this recommended practice.<br />\n
          Sizing batteries for hybrid and grid-connected PV systems is beyond the scope of this recommended practice. Recommended practices for the remainder of the electrical systems associated with standalone PV installations are also beyond the scope of this recommended practice.<br />\n
          Sizing examples are given for various representative system applications. Iterative techniques to optimize battery costs, which include consideration of the interrelationship between battery size, PV array size, and weather, are beyond the scope of this recommended practice.<br />\n
          This recommended practice is meant to assist system designers in sizing lead-acid batteries for residential, commercial, and industrial stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128610 …}
    #channels: Doctrine\ORM\PersistentCollection {#128619 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128595 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128573 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128530 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128534
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128533
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1184882400 {#128532
      date: 2007-07-20 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1013"
    -bookCollection: ""
    -pageCount: 55
    -documents: Doctrine\ORM\PersistentCollection {#128527 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128525 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 486.0 MiB 0.79 ms
Input props 
[
  "product" => App\Entity\Product\Product {#128531
    #id: 10140
    #code: "IEEE00003712"
    #attributes: Doctrine\ORM\PersistentCollection {#128618 …}
    #variants: Doctrine\ORM\PersistentCollection {#128613 …}
    #options: Doctrine\ORM\PersistentCollection {#128609 …}
    #associations: Doctrine\ORM\PersistentCollection {#128612 …}
    #createdAt: DateTime @1751038848 {#128537
      date: 2025-06-27 17:40:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#128536
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128518 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128876
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128531}
        #id: 35569
        #name: "IEEE 1013:2007"
        #slug: "ieee-1013-2007-ieee00003712-241792"
        #description: """
          Revision Standard - Superseded.<br />\n
          A method for determining the energy-capacity requirements (sizing) of both vented and valve-regulated lead-acid batteries used in terrestrial stand-alone photovoltaic (PV) systems is described. Sizing batteries for hybrid or grid-connected PV systems is beyond the scope of this document. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this document. Recommended practices for the remainder of the electrical systems associated with PV installations are also beyond the scope of this document.<br />\n
          \t\t\t\t<br />\n
          This recommended practice describes a method for sizing both vented and valve-regulated lead-acid batteries in stand-alone PV systems. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this recommended practice.<br />\n
          Sizing batteries for hybrid and grid-connected PV systems is beyond the scope of this recommended practice. Recommended practices for the remainder of the electrical systems associated with standalone PV installations are also beyond the scope of this recommended practice.<br />\n
          Sizing examples are given for various representative system applications. Iterative techniques to optimize battery costs, which include consideration of the interrelationship between battery size, PV array size, and weather, are beyond the scope of this recommended practice.<br />\n
          This recommended practice is meant to assist system designers in sizing lead-acid batteries for residential, commercial, and industrial stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128610 …}
    #channels: Doctrine\ORM\PersistentCollection {#128619 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128595 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128573 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128530 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128534
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128533
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1184882400 {#128532
      date: 2007-07-20 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1013"
    -bookCollection: ""
    -pageCount: 55
    -documents: Doctrine\ORM\PersistentCollection {#128527 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128525 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#128964
  +product: App\Entity\Product\Product {#128531
    #id: 10140
    #code: "IEEE00003712"
    #attributes: Doctrine\ORM\PersistentCollection {#128618 …}
    #variants: Doctrine\ORM\PersistentCollection {#128613 …}
    #options: Doctrine\ORM\PersistentCollection {#128609 …}
    #associations: Doctrine\ORM\PersistentCollection {#128612 …}
    #createdAt: DateTime @1751038848 {#128537
      date: 2025-06-27 17:40:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#128536
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128518 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128876
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128531}
        #id: 35569
        #name: "IEEE 1013:2007"
        #slug: "ieee-1013-2007-ieee00003712-241792"
        #description: """
          Revision Standard - Superseded.<br />\n
          A method for determining the energy-capacity requirements (sizing) of both vented and valve-regulated lead-acid batteries used in terrestrial stand-alone photovoltaic (PV) systems is described. Sizing batteries for hybrid or grid-connected PV systems is beyond the scope of this document. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this document. Recommended practices for the remainder of the electrical systems associated with PV installations are also beyond the scope of this document.<br />\n
          \t\t\t\t<br />\n
          This recommended practice describes a method for sizing both vented and valve-regulated lead-acid batteries in stand-alone PV systems. Installation, maintenance, safety, testing procedures, and consideration of battery types other than lead-acid are beyond the scope of this recommended practice.<br />\n
          Sizing batteries for hybrid and grid-connected PV systems is beyond the scope of this recommended practice. Recommended practices for the remainder of the electrical systems associated with standalone PV installations are also beyond the scope of this recommended practice.<br />\n
          Sizing examples are given for various representative system applications. Iterative techniques to optimize battery costs, which include consideration of the interrelationship between battery size, PV array size, and weather, are beyond the scope of this recommended practice.<br />\n
          This recommended practice is meant to assist system designers in sizing lead-acid batteries for residential, commercial, and industrial stand-alone PV systems.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128610 …}
    #channels: Doctrine\ORM\PersistentCollection {#128619 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128595 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128573 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128530 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128534
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128533
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1184882400 {#128532
      date: 2007-07-20 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1013"
    -bookCollection: ""
    -pageCount: 55
    -documents: Doctrine\ORM\PersistentCollection {#128527 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128525 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}