Symfony Profiler

[
  "product" => App\Entity\Product\Product {#7310
    #id: 13132
    #code: "IEEE00011614"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751040889 {#7274
      date: 2025-06-27 18:14:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#7322
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 47537
        #name: "IEEE C63.10a:2024"
        #slug: "ieee-c63-10a-2024-ieee00011614-276359"
        #description: """
          Amendment Standard - Active - Draft.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. The procedures in this standard may be used as a basis for measurements above 231 GHz up to 750 GHz, however regulators shall be consulted before these procedures may be used for compliance measurements. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1731970800 {#7292
      date: 2024-11-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1723759200 {#7318
      date: 2024-08-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#93046
  +product: App\Entity\Product\Product {#7310
    #id: 13132
    #code: "IEEE00011614"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751040889 {#7274
      date: 2025-06-27 18:14:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#7322
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 47537
        #name: "IEEE C63.10a:2024"
        #slug: "ieee-c63-10a-2024-ieee00011614-276359"
        #description: """
          Amendment Standard - Active - Draft.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. The procedures in this standard may be used as a basis for measurements above 231 GHz up to 750 GHz, however regulators shall be consulted before these procedures may be used for compliance measurements. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1731970800 {#7292
      date: 2024-11-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1723759200 {#7318
      date: 2024-08-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 13132
    #code: "IEEE00011614"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751040889 {#7274
      date: 2025-06-27 18:14:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#7322
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 47537
        #name: "IEEE C63.10a:2024"
        #slug: "ieee-c63-10a-2024-ieee00011614-276359"
        #description: """
          Amendment Standard - Active - Draft.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. The procedures in this standard may be used as a basis for measurements above 231 GHz up to 750 GHz, however regulators shall be consulted before these procedures may be used for compliance measurements. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1731970800 {#7292
      date: 2024-11-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1723759200 {#7318
      date: 2024-08-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]

App\Twig\Components\ProductType {#93224
  +product: App\Entity\Product\Product {#7310
    #id: 13132
    #code: "IEEE00011614"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751040889 {#7274
      date: 2025-06-27 18:14:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#7322
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 47537
        #name: "IEEE C63.10a:2024"
        #slug: "ieee-c63-10a-2024-ieee00011614-276359"
        #description: """
          Amendment Standard - Active - Draft.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. The procedures in this standard may be used as a basis for measurements above 231 GHz up to 750 GHz, however regulators shall be consulted before these procedures may be used for compliance measurements. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1731970800 {#7292
      date: 2024-11-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1723759200 {#7318
      date: 2024-08-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Standard amendment"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 13132
    #code: "IEEE00011614"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751040889 {#7274
      date: 2025-06-27 18:14:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#7322
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 47537
        #name: "IEEE C63.10a:2024"
        #slug: "ieee-c63-10a-2024-ieee00011614-276359"
        #description: """
          Amendment Standard - Active - Draft.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. The procedures in this standard may be used as a basis for measurements above 231 GHz up to 750 GHz, however regulators shall be consulted before these procedures may be used for compliance measurements. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1731970800 {#7292
      date: 2024-11-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1723759200 {#7318
      date: 2024-08-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]

App\Twig\Components\ProductMostRecent {#93291
  +product: App\Entity\Product\Product {#7310
    #id: 13132
    #code: "IEEE00011614"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751040889 {#7274
      date: 2025-06-27 18:14:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#7322
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 47537
        #name: "IEEE C63.10a:2024"
        #slug: "ieee-c63-10a-2024-ieee00011614-276359"
        #description: """
          Amendment Standard - Active - Draft.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. The procedures in this standard may be used as a basis for measurements above 231 GHz up to 750 GHz, however regulators shall be consulted before these procedures may be used for compliance measurements. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1731970800 {#7292
      date: 2024-11-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1723759200 {#7318
      date: 2024-08-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#100275
    #id: 12682
    #code: "IEEE00010445"
    #attributes: Doctrine\ORM\PersistentCollection {#100258 …}
    #variants: Doctrine\ORM\PersistentCollection {#100255 …}
    #options: Doctrine\ORM\PersistentCollection {#100251 …}
    #associations: Doctrine\ORM\PersistentCollection {#100253 …}
    #createdAt: DateTime @1751040592 {#100283
      date: 2025-06-27 18:09:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#100256
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100269 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100290
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100275}
        #id: 45737
        #name: "IEEE/ANSI/USEMCSC C63.10:2020"
        #slug: "ieee-ansi-usemcsc-c63-10-2020-ieee00010445-244337"
        #description: """
          Revision Standard - Active.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          As described in 1.2 of this standard, measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices. For terms and phrases contained in the text that do not represent obvious or common usage, definitions are provided. In most cases, measurement instrumentation and calibration requirements, which should be used with this standard, are generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main<br />\n
          Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.<br />\n
          This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as, but not limited to:<br />\n
          a) Unlicensed Personal Communications Services devices covered under ANSI C63.17-2013<br />\n
          b) Dynamic Frequency Selection (DFS) functionality required for U-NII devices in the United States<br />\n
          c) Industrial, Scientific and Medical equipment<br />\n
          d) RF exposure conformity assessment methods subject to standards such as IEEE Std 1528-2003
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100266 …}
    #channels: Doctrine\ORM\PersistentCollection {#100260 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100264 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100262 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100276 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100243
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1730847600 {#100282
      date: 2024-11-06 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1611874800 {#100281
      date: 2021-01-29 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 268
    -documents: Doctrine\ORM\PersistentCollection {#100273 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100271 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#100337
  +product: App\Entity\Product\Product {#100275
    #id: 12682
    #code: "IEEE00010445"
    #attributes: Doctrine\ORM\PersistentCollection {#100258 …}
    #variants: Doctrine\ORM\PersistentCollection {#100255 …}
    #options: Doctrine\ORM\PersistentCollection {#100251 …}
    #associations: Doctrine\ORM\PersistentCollection {#100253 …}
    #createdAt: DateTime @1751040592 {#100283
      date: 2025-06-27 18:09:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#100256
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100269 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100290
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100275}
        #id: 45737
        #name: "IEEE/ANSI/USEMCSC C63.10:2020"
        #slug: "ieee-ansi-usemcsc-c63-10-2020-ieee00010445-244337"
        #description: """
          Revision Standard - Active.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          As described in 1.2 of this standard, measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices. For terms and phrases contained in the text that do not represent obvious or common usage, definitions are provided. In most cases, measurement instrumentation and calibration requirements, which should be used with this standard, are generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main<br />\n
          Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.<br />\n
          This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as, but not limited to:<br />\n
          a) Unlicensed Personal Communications Services devices covered under ANSI C63.17-2013<br />\n
          b) Dynamic Frequency Selection (DFS) functionality required for U-NII devices in the United States<br />\n
          c) Industrial, Scientific and Medical equipment<br />\n
          d) RF exposure conformity assessment methods subject to standards such as IEEE Std 1528-2003
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100266 …}
    #channels: Doctrine\ORM\PersistentCollection {#100260 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100264 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100262 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100276 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100243
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1730847600 {#100282
      date: 2024-11-06 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1611874800 {#100281
      date: 2021-01-29 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 268
    -documents: Doctrine\ORM\PersistentCollection {#100273 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100271 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#100275
    #id: 12682
    #code: "IEEE00010445"
    #attributes: Doctrine\ORM\PersistentCollection {#100258 …}
    #variants: Doctrine\ORM\PersistentCollection {#100255 …}
    #options: Doctrine\ORM\PersistentCollection {#100251 …}
    #associations: Doctrine\ORM\PersistentCollection {#100253 …}
    #createdAt: DateTime @1751040592 {#100283
      date: 2025-06-27 18:09:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#100256
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100269 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100290
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100275}
        #id: 45737
        #name: "IEEE/ANSI/USEMCSC C63.10:2020"
        #slug: "ieee-ansi-usemcsc-c63-10-2020-ieee00010445-244337"
        #description: """
          Revision Standard - Active.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          As described in 1.2 of this standard, measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices. For terms and phrases contained in the text that do not represent obvious or common usage, definitions are provided. In most cases, measurement instrumentation and calibration requirements, which should be used with this standard, are generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main<br />\n
          Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.<br />\n
          This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as, but not limited to:<br />\n
          a) Unlicensed Personal Communications Services devices covered under ANSI C63.17-2013<br />\n
          b) Dynamic Frequency Selection (DFS) functionality required for U-NII devices in the United States<br />\n
          c) Industrial, Scientific and Medical equipment<br />\n
          d) RF exposure conformity assessment methods subject to standards such as IEEE Std 1528-2003
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100266 …}
    #channels: Doctrine\ORM\PersistentCollection {#100260 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100264 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100262 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100276 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100243
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1730847600 {#100282
      date: 2024-11-06 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1611874800 {#100281
      date: 2021-01-29 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 268
    -documents: Doctrine\ORM\PersistentCollection {#100273 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100271 …}
  }
]

App\Twig\Components\ProductMostRecent {#100405
  +product: App\Entity\Product\Product {#100275
    #id: 12682
    #code: "IEEE00010445"
    #attributes: Doctrine\ORM\PersistentCollection {#100258 …}
    #variants: Doctrine\ORM\PersistentCollection {#100255 …}
    #options: Doctrine\ORM\PersistentCollection {#100251 …}
    #associations: Doctrine\ORM\PersistentCollection {#100253 …}
    #createdAt: DateTime @1751040592 {#100283
      date: 2025-06-27 18:09:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#100256
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100269 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100290
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100275}
        #id: 45737
        #name: "IEEE/ANSI/USEMCSC C63.10:2020"
        #slug: "ieee-ansi-usemcsc-c63-10-2020-ieee00010445-244337"
        #description: """
          Revision Standard - Active.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          As described in 1.2 of this standard, measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices. For terms and phrases contained in the text that do not represent obvious or common usage, definitions are provided. In most cases, measurement instrumentation and calibration requirements, which should be used with this standard, are generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main<br />\n
          Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.<br />\n
          This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as, but not limited to:<br />\n
          a) Unlicensed Personal Communications Services devices covered under ANSI C63.17-2013<br />\n
          b) Dynamic Frequency Selection (DFS) functionality required for U-NII devices in the United States<br />\n
          c) Industrial, Scientific and Medical equipment<br />\n
          d) RF exposure conformity assessment methods subject to standards such as IEEE Std 1528-2003
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100266 …}
    #channels: Doctrine\ORM\PersistentCollection {#100260 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100264 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100262 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100276 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100243
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1730847600 {#100282
      date: 2024-11-06 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1611874800 {#100281
      date: 2021-01-29 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 268
    -documents: Doctrine\ORM\PersistentCollection {#100273 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100271 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 13132
    #code: "IEEE00011614"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751040889 {#7274
      date: 2025-06-27 18:14:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#7322
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 47537
        #name: "IEEE C63.10a:2024"
        #slug: "ieee-c63-10a-2024-ieee00011614-276359"
        #description: """
          Amendment Standard - Active - Draft.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. The procedures in this standard may be used as a basis for measurements above 231 GHz up to 750 GHz, however regulators shall be consulted before these procedures may be used for compliance measurements. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1731970800 {#7292
      date: 2024-11-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1723759200 {#7318
      date: 2024-08-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107083
  +product: App\Entity\Product\Product {#7310
    #id: 13132
    #code: "IEEE00011614"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751040889 {#7274
      date: 2025-06-27 18:14:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#7322
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 47537
        #name: "IEEE C63.10a:2024"
        #slug: "ieee-c63-10a-2024-ieee00011614-276359"
        #description: """
          Amendment Standard - Active - Draft.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. The procedures in this standard may be used as a basis for measurements above 231 GHz up to 750 GHz, however regulators shall be consulted before these procedures may be used for compliance measurements. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1731970800 {#7292
      date: 2024-11-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1723759200 {#7318
      date: 2024-08-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 13132
    #code: "IEEE00011614"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751040889 {#7274
      date: 2025-06-27 18:14:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#7322
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 47537
        #name: "IEEE C63.10a:2024"
        #slug: "ieee-c63-10a-2024-ieee00011614-276359"
        #description: """
          Amendment Standard - Active - Draft.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. The procedures in this standard may be used as a basis for measurements above 231 GHz up to 750 GHz, however regulators shall be consulted before these procedures may be used for compliance measurements. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1731970800 {#7292
      date: 2024-11-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1723759200 {#7318
      date: 2024-08-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]

App\Twig\Components\ProductMostRecent {#107125
  +product: App\Entity\Product\Product {#7310
    #id: 13132
    #code: "IEEE00011614"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751040889 {#7274
      date: 2025-06-27 18:14:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970953 {#7322
      date: 2025-07-31 16:09:13.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 47537
        #name: "IEEE C63.10a:2024"
        #slug: "ieee-c63-10a-2024-ieee00011614-276359"
        #description: """
          Amendment Standard - Active - Draft.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. The procedures in this standard may be used as a basis for measurements above 231 GHz up to 750 GHz, however regulators shall be consulted before these procedures may be used for compliance measurements. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1743289200 {#7317
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1731970800 {#7292
      date: 2024-11-19 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1723759200 {#7318
      date: 2024-08-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 23
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106972
    #id: 12899
    #code: "IEEE00010915"
    #attributes: Doctrine\ORM\PersistentCollection {#106988 …}
    #variants: Doctrine\ORM\PersistentCollection {#106990 …}
    #options: Doctrine\ORM\PersistentCollection {#106994 …}
    #associations: Doctrine\ORM\PersistentCollection {#106992 …}
    #createdAt: DateTime @1751040731 {#106963
      date: 2025-06-27 18:12:11.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#106961
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106978 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107192
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106972}
        #id: 46605
        #name: "IEEE/ANSI C63.10-2020/Cor1:2023"
        #slug: "ieee-ansi-c63-10-2020-cor1-2023-ieee00010915-244557"
        #description: """
          Corrigendum Standard - Active.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, anti-pilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices). Subclause 6.2.2 is addressed in this corrigendum, such that the requirement to calibrate the LISN with the extension cord is removed and Equation (L.1) has been corrected.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices - Corrigendum 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106980 …}
    #channels: Doctrine\ORM\PersistentCollection {#106986 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106982 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106984 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106971 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106964
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1695679200 {#106957
      date: 2023-09-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1686002400 {#106954
      date: 2023-06-06 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 16
    -documents: Doctrine\ORM\PersistentCollection {#106974 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106976 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107207
  +product: App\Entity\Product\Product {#106972
    #id: 12899
    #code: "IEEE00010915"
    #attributes: Doctrine\ORM\PersistentCollection {#106988 …}
    #variants: Doctrine\ORM\PersistentCollection {#106990 …}
    #options: Doctrine\ORM\PersistentCollection {#106994 …}
    #associations: Doctrine\ORM\PersistentCollection {#106992 …}
    #createdAt: DateTime @1751040731 {#106963
      date: 2025-06-27 18:12:11.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#106961
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106978 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107192
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106972}
        #id: 46605
        #name: "IEEE/ANSI C63.10-2020/Cor1:2023"
        #slug: "ieee-ansi-c63-10-2020-cor1-2023-ieee00010915-244557"
        #description: """
          Corrigendum Standard - Active.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, anti-pilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices). Subclause 6.2.2 is addressed in this corrigendum, such that the requirement to calibrate the LISN with the extension cord is removed and Equation (L.1) has been corrected.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices - Corrigendum 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106980 …}
    #channels: Doctrine\ORM\PersistentCollection {#106986 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106982 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106984 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106971 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106964
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1695679200 {#106957
      date: 2023-09-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1686002400 {#106954
      date: 2023-06-06 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 16
    -documents: Doctrine\ORM\PersistentCollection {#106974 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106976 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106972
    #id: 12899
    #code: "IEEE00010915"
    #attributes: Doctrine\ORM\PersistentCollection {#106988 …}
    #variants: Doctrine\ORM\PersistentCollection {#106990 …}
    #options: Doctrine\ORM\PersistentCollection {#106994 …}
    #associations: Doctrine\ORM\PersistentCollection {#106992 …}
    #createdAt: DateTime @1751040731 {#106963
      date: 2025-06-27 18:12:11.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#106961
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106978 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107192
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106972}
        #id: 46605
        #name: "IEEE/ANSI C63.10-2020/Cor1:2023"
        #slug: "ieee-ansi-c63-10-2020-cor1-2023-ieee00010915-244557"
        #description: """
          Corrigendum Standard - Active.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, anti-pilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices). Subclause 6.2.2 is addressed in this corrigendum, such that the requirement to calibrate the LISN with the extension cord is removed and Equation (L.1) has been corrected.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices - Corrigendum 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106980 …}
    #channels: Doctrine\ORM\PersistentCollection {#106986 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106982 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106984 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106971 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106964
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1695679200 {#106957
      date: 2023-09-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1686002400 {#106954
      date: 2023-06-06 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 16
    -documents: Doctrine\ORM\PersistentCollection {#106974 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106976 …}
  }
]

App\Twig\Components\ProductMostRecent {#107259
  +product: App\Entity\Product\Product {#106972
    #id: 12899
    #code: "IEEE00010915"
    #attributes: Doctrine\ORM\PersistentCollection {#106988 …}
    #variants: Doctrine\ORM\PersistentCollection {#106990 …}
    #options: Doctrine\ORM\PersistentCollection {#106994 …}
    #associations: Doctrine\ORM\PersistentCollection {#106992 …}
    #createdAt: DateTime @1751040731 {#106963
      date: 2025-06-27 18:12:11.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#106961
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106978 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107192
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106972}
        #id: 46605
        #name: "IEEE/ANSI C63.10-2020/Cor1:2023"
        #slug: "ieee-ansi-c63-10-2020-cor1-2023-ieee00010915-244557"
        #description: """
          Corrigendum Standard - Active.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, anti-pilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices). Subclause 6.2.2 is addressed in this corrigendum, such that the requirement to calibrate the LISN with the extension cord is removed and Equation (L.1) has been corrected.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices - Corrigendum 1"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106980 …}
    #channels: Doctrine\ORM\PersistentCollection {#106986 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106982 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106984 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106971 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106964
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1695679200 {#106957
      date: 2023-09-26 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1686002400 {#106954
      date: 2023-06-06 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 16
    -documents: Doctrine\ORM\PersistentCollection {#106974 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106976 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#100275
    #id: 12682
    #code: "IEEE00010445"
    #attributes: Doctrine\ORM\PersistentCollection {#100258 …}
    #variants: Doctrine\ORM\PersistentCollection {#100255 …}
    #options: Doctrine\ORM\PersistentCollection {#100251 …}
    #associations: Doctrine\ORM\PersistentCollection {#100253 …}
    #createdAt: DateTime @1751040592 {#100283
      date: 2025-06-27 18:09:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#100256
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100269 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100290
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100275}
        #id: 45737
        #name: "IEEE/ANSI/USEMCSC C63.10:2020"
        #slug: "ieee-ansi-usemcsc-c63-10-2020-ieee00010445-244337"
        #description: """
          Revision Standard - Active.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          As described in 1.2 of this standard, measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices. For terms and phrases contained in the text that do not represent obvious or common usage, definitions are provided. In most cases, measurement instrumentation and calibration requirements, which should be used with this standard, are generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main<br />\n
          Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.<br />\n
          This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as, but not limited to:<br />\n
          a) Unlicensed Personal Communications Services devices covered under ANSI C63.17-2013<br />\n
          b) Dynamic Frequency Selection (DFS) functionality required for U-NII devices in the United States<br />\n
          c) Industrial, Scientific and Medical equipment<br />\n
          d) RF exposure conformity assessment methods subject to standards such as IEEE Std 1528-2003
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100266 …}
    #channels: Doctrine\ORM\PersistentCollection {#100260 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100264 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100262 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100276 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100243
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1730847600 {#100282
      date: 2024-11-06 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1611874800 {#100281
      date: 2021-01-29 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 268
    -documents: Doctrine\ORM\PersistentCollection {#100273 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100271 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107323
  +product: App\Entity\Product\Product {#100275
    #id: 12682
    #code: "IEEE00010445"
    #attributes: Doctrine\ORM\PersistentCollection {#100258 …}
    #variants: Doctrine\ORM\PersistentCollection {#100255 …}
    #options: Doctrine\ORM\PersistentCollection {#100251 …}
    #associations: Doctrine\ORM\PersistentCollection {#100253 …}
    #createdAt: DateTime @1751040592 {#100283
      date: 2025-06-27 18:09:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#100256
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100269 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100290
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100275}
        #id: 45737
        #name: "IEEE/ANSI/USEMCSC C63.10:2020"
        #slug: "ieee-ansi-usemcsc-c63-10-2020-ieee00010445-244337"
        #description: """
          Revision Standard - Active.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          As described in 1.2 of this standard, measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices. For terms and phrases contained in the text that do not represent obvious or common usage, definitions are provided. In most cases, measurement instrumentation and calibration requirements, which should be used with this standard, are generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main<br />\n
          Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.<br />\n
          This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as, but not limited to:<br />\n
          a) Unlicensed Personal Communications Services devices covered under ANSI C63.17-2013<br />\n
          b) Dynamic Frequency Selection (DFS) functionality required for U-NII devices in the United States<br />\n
          c) Industrial, Scientific and Medical equipment<br />\n
          d) RF exposure conformity assessment methods subject to standards such as IEEE Std 1528-2003
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100266 …}
    #channels: Doctrine\ORM\PersistentCollection {#100260 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100264 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100262 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100276 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100243
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1730847600 {#100282
      date: 2024-11-06 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1611874800 {#100281
      date: 2021-01-29 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 268
    -documents: Doctrine\ORM\PersistentCollection {#100273 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100271 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#100275
    #id: 12682
    #code: "IEEE00010445"
    #attributes: Doctrine\ORM\PersistentCollection {#100258 …}
    #variants: Doctrine\ORM\PersistentCollection {#100255 …}
    #options: Doctrine\ORM\PersistentCollection {#100251 …}
    #associations: Doctrine\ORM\PersistentCollection {#100253 …}
    #createdAt: DateTime @1751040592 {#100283
      date: 2025-06-27 18:09:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#100256
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100269 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100290
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100275}
        #id: 45737
        #name: "IEEE/ANSI/USEMCSC C63.10:2020"
        #slug: "ieee-ansi-usemcsc-c63-10-2020-ieee00010445-244337"
        #description: """
          Revision Standard - Active.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          As described in 1.2 of this standard, measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices. For terms and phrases contained in the text that do not represent obvious or common usage, definitions are provided. In most cases, measurement instrumentation and calibration requirements, which should be used with this standard, are generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main<br />\n
          Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.<br />\n
          This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as, but not limited to:<br />\n
          a) Unlicensed Personal Communications Services devices covered under ANSI C63.17-2013<br />\n
          b) Dynamic Frequency Selection (DFS) functionality required for U-NII devices in the United States<br />\n
          c) Industrial, Scientific and Medical equipment<br />\n
          d) RF exposure conformity assessment methods subject to standards such as IEEE Std 1528-2003
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100266 …}
    #channels: Doctrine\ORM\PersistentCollection {#100260 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100264 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100262 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100276 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100243
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1730847600 {#100282
      date: 2024-11-06 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1611874800 {#100281
      date: 2021-01-29 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 268
    -documents: Doctrine\ORM\PersistentCollection {#100273 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100271 …}
  }
]

App\Twig\Components\ProductMostRecent {#107350
  +product: App\Entity\Product\Product {#100275
    #id: 12682
    #code: "IEEE00010445"
    #attributes: Doctrine\ORM\PersistentCollection {#100258 …}
    #variants: Doctrine\ORM\PersistentCollection {#100255 …}
    #options: Doctrine\ORM\PersistentCollection {#100251 …}
    #associations: Doctrine\ORM\PersistentCollection {#100253 …}
    #createdAt: DateTime @1751040592 {#100283
      date: 2025-06-27 18:09:52.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#100256
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100269 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100290
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100275}
        #id: 45737
        #name: "IEEE/ANSI/USEMCSC C63.10:2020"
        #slug: "ieee-ansi-usemcsc-c63-10-2020-ieee00010445-244337"
        #description: """
          Revision Standard - Active.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          As described in 1.2 of this standard, measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices. For terms and phrases contained in the text that do not represent obvious or common usage, definitions are provided. In most cases, measurement instrumentation and calibration requirements, which should be used with this standard, are generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main<br />\n
          Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.<br />\n
          This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as, but not limited to:<br />\n
          a) Unlicensed Personal Communications Services devices covered under ANSI C63.17-2013<br />\n
          b) Dynamic Frequency Selection (DFS) functionality required for U-NII devices in the United States<br />\n
          c) Industrial, Scientific and Medical equipment<br />\n
          d) RF exposure conformity assessment methods subject to standards such as IEEE Std 1528-2003
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100266 …}
    #channels: Doctrine\ORM\PersistentCollection {#100260 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100264 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100262 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100276 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100243
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1730847600 {#100282
      date: 2024-11-06 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1611874800 {#100281
      date: 2021-01-29 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 268
    -documents: Doctrine\ORM\PersistentCollection {#100273 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100271 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#107002
    #id: 11182
    #code: "IEEE00005690"
    #attributes: Doctrine\ORM\PersistentCollection {#107019 …}
    #variants: Doctrine\ORM\PersistentCollection {#107021 …}
    #options: Doctrine\ORM\PersistentCollection {#107025 …}
    #associations: Doctrine\ORM\PersistentCollection {#107023 …}
    #createdAt: DateTime @1751039531 {#106998
      date: 2025-06-27 17:52:11.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#106997
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107009 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107424
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107002}
        #id: 39737
        #name: "IEEE/ANSI C63.10:2013"
        #slug: "ieee-ansi-c63-10-2013-ieee00005690-242834"
        #description: """
          Revision Standard - Superseded.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product-specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          Uses of the word shall in this standard indicate a mandatory requirement that must be met to satisfy this standard. The word should is used to indicate that a requirement is recommended but not mandatory. Tolerances on dimensions and distances are based on good engineering practice where not specified. The word may is used to indicate a recommendation that is at the discretion of the user. In addition, notes in this document are informative and are not part of the requirements. In this standard, the text takes precedence over the figures because the text is complete and the figures are illustrative of a typical application of the text. Notes are used in the text for emphasis or to offer informative suggestions about the technical content of the standard, and provide additional information to assist the reader with a particular passage, but they do not include mandatory requirements. Footnotes in text are included only for information, clarification,and/or aid applicable to the use of the standard, but mandatory requirements are not included in text footnotes.<br />\n
          Measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices, as described in 1.2. Definitions are provided for terms and phrases contained in the text, in which the words do not represent obvious or common usage. In most cases, measurement instrumentation and calibration requirements are only generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main text is augmented by a series of annexes that provide details for certain measurement methods and facilities.<br />\n
          Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It represents a consolidation and elucidation of procedures that were heretofore dispersed throughout many documents. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.<br />\n
          This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as Unlicensed Personal Communication Services devices, which are covered in ANSI C63.17-2006 [B3].1 Procedures for evaluating dynamic frequency selection (DFS) functionality (i.e., required for U-NII devices in the United States) and for television-band unlicensed wireless devices2 are not addressed in this standard. This standard also does not cover measurement of emissions from radio receivers, the receiver portion of a transceiver, and other types of unintentional radiators, which are covered by other standards (e.g., ANSI C63.4).3 This standard does not cover other types of unintentional radiators (e.g., industrial, scientific, and medical (ISM) equipment). In addition, many types of unlicensed wireless devices are also subject to regulatory requirements concerning human exposure to RF energy; RF exposure conformity assessment methods are not considered in this standard but are the subject of other standards (e.g., IEEE Std 1528TM-2003 [B37]).<br />\n
          This document provides standard test methods for determining compliance with regulatory requirements for many types of unlicensed wireless devices. These unlicensed wireless devices include, but are not limited to, the following:<br />\n
          -Remote control and security unlicensed wireless devices<br />\n
          -Frequency hopping and direct sequence spread spectrum devices<br />\n
          -Digital transmission system devices<br />\n
          -Antipilferage devices<br />\n
          -Cordless telephones<br />\n
          -Radio frequency identification (RFID) tag readers<br />\n
          -Unlicensed National Information Infrastructure devices<br />\n
          -Intrusion detectors<br />\n
          -Unlicensed wireless devices operating below 30 MHz<br />\n
          -Wireless (garage) door openers<br />\n
          -Ultra-wideband (UWB) devices<br />\n
          -Automatic vehicle identification systems<br />\n
          -Inductive devices
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107011 …}
    #channels: Doctrine\ORM\PersistentCollection {#107017 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107013 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107015 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107003 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106996
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1612220400 {#106966
      date: 2021-02-02 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1379023200 {#106965
      date: 2013-09-13 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1379023200 {#107001
      date: 2013-09-13 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 253
    -documents: Doctrine\ORM\PersistentCollection {#107005 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107007 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107439
  +product: App\Entity\Product\Product {#107002
    #id: 11182
    #code: "IEEE00005690"
    #attributes: Doctrine\ORM\PersistentCollection {#107019 …}
    #variants: Doctrine\ORM\PersistentCollection {#107021 …}
    #options: Doctrine\ORM\PersistentCollection {#107025 …}
    #associations: Doctrine\ORM\PersistentCollection {#107023 …}
    #createdAt: DateTime @1751039531 {#106998
      date: 2025-06-27 17:52:11.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#106997
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107009 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107424
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107002}
        #id: 39737
        #name: "IEEE/ANSI C63.10:2013"
        #slug: "ieee-ansi-c63-10-2013-ieee00005690-242834"
        #description: """
          Revision Standard - Superseded.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product-specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          Uses of the word shall in this standard indicate a mandatory requirement that must be met to satisfy this standard. The word should is used to indicate that a requirement is recommended but not mandatory. Tolerances on dimensions and distances are based on good engineering practice where not specified. The word may is used to indicate a recommendation that is at the discretion of the user. In addition, notes in this document are informative and are not part of the requirements. In this standard, the text takes precedence over the figures because the text is complete and the figures are illustrative of a typical application of the text. Notes are used in the text for emphasis or to offer informative suggestions about the technical content of the standard, and provide additional information to assist the reader with a particular passage, but they do not include mandatory requirements. Footnotes in text are included only for information, clarification,and/or aid applicable to the use of the standard, but mandatory requirements are not included in text footnotes.<br />\n
          Measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices, as described in 1.2. Definitions are provided for terms and phrases contained in the text, in which the words do not represent obvious or common usage. In most cases, measurement instrumentation and calibration requirements are only generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main text is augmented by a series of annexes that provide details for certain measurement methods and facilities.<br />\n
          Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It represents a consolidation and elucidation of procedures that were heretofore dispersed throughout many documents. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.<br />\n
          This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as Unlicensed Personal Communication Services devices, which are covered in ANSI C63.17-2006 [B3].1 Procedures for evaluating dynamic frequency selection (DFS) functionality (i.e., required for U-NII devices in the United States) and for television-band unlicensed wireless devices2 are not addressed in this standard. This standard also does not cover measurement of emissions from radio receivers, the receiver portion of a transceiver, and other types of unintentional radiators, which are covered by other standards (e.g., ANSI C63.4).3 This standard does not cover other types of unintentional radiators (e.g., industrial, scientific, and medical (ISM) equipment). In addition, many types of unlicensed wireless devices are also subject to regulatory requirements concerning human exposure to RF energy; RF exposure conformity assessment methods are not considered in this standard but are the subject of other standards (e.g., IEEE Std 1528TM-2003 [B37]).<br />\n
          This document provides standard test methods for determining compliance with regulatory requirements for many types of unlicensed wireless devices. These unlicensed wireless devices include, but are not limited to, the following:<br />\n
          -Remote control and security unlicensed wireless devices<br />\n
          -Frequency hopping and direct sequence spread spectrum devices<br />\n
          -Digital transmission system devices<br />\n
          -Antipilferage devices<br />\n
          -Cordless telephones<br />\n
          -Radio frequency identification (RFID) tag readers<br />\n
          -Unlicensed National Information Infrastructure devices<br />\n
          -Intrusion detectors<br />\n
          -Unlicensed wireless devices operating below 30 MHz<br />\n
          -Wireless (garage) door openers<br />\n
          -Ultra-wideband (UWB) devices<br />\n
          -Automatic vehicle identification systems<br />\n
          -Inductive devices
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107011 …}
    #channels: Doctrine\ORM\PersistentCollection {#107017 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107013 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107015 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107003 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106996
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1612220400 {#106966
      date: 2021-02-02 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1379023200 {#106965
      date: 2013-09-13 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1379023200 {#107001
      date: 2013-09-13 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 253
    -documents: Doctrine\ORM\PersistentCollection {#107005 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107007 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#107002
    #id: 11182
    #code: "IEEE00005690"
    #attributes: Doctrine\ORM\PersistentCollection {#107019 …}
    #variants: Doctrine\ORM\PersistentCollection {#107021 …}
    #options: Doctrine\ORM\PersistentCollection {#107025 …}
    #associations: Doctrine\ORM\PersistentCollection {#107023 …}
    #createdAt: DateTime @1751039531 {#106998
      date: 2025-06-27 17:52:11.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#106997
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107009 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107424
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107002}
        #id: 39737
        #name: "IEEE/ANSI C63.10:2013"
        #slug: "ieee-ansi-c63-10-2013-ieee00005690-242834"
        #description: """
          Revision Standard - Superseded.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product-specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          Uses of the word shall in this standard indicate a mandatory requirement that must be met to satisfy this standard. The word should is used to indicate that a requirement is recommended but not mandatory. Tolerances on dimensions and distances are based on good engineering practice where not specified. The word may is used to indicate a recommendation that is at the discretion of the user. In addition, notes in this document are informative and are not part of the requirements. In this standard, the text takes precedence over the figures because the text is complete and the figures are illustrative of a typical application of the text. Notes are used in the text for emphasis or to offer informative suggestions about the technical content of the standard, and provide additional information to assist the reader with a particular passage, but they do not include mandatory requirements. Footnotes in text are included only for information, clarification,and/or aid applicable to the use of the standard, but mandatory requirements are not included in text footnotes.<br />\n
          Measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices, as described in 1.2. Definitions are provided for terms and phrases contained in the text, in which the words do not represent obvious or common usage. In most cases, measurement instrumentation and calibration requirements are only generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main text is augmented by a series of annexes that provide details for certain measurement methods and facilities.<br />\n
          Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It represents a consolidation and elucidation of procedures that were heretofore dispersed throughout many documents. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.<br />\n
          This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as Unlicensed Personal Communication Services devices, which are covered in ANSI C63.17-2006 [B3].1 Procedures for evaluating dynamic frequency selection (DFS) functionality (i.e., required for U-NII devices in the United States) and for television-band unlicensed wireless devices2 are not addressed in this standard. This standard also does not cover measurement of emissions from radio receivers, the receiver portion of a transceiver, and other types of unintentional radiators, which are covered by other standards (e.g., ANSI C63.4).3 This standard does not cover other types of unintentional radiators (e.g., industrial, scientific, and medical (ISM) equipment). In addition, many types of unlicensed wireless devices are also subject to regulatory requirements concerning human exposure to RF energy; RF exposure conformity assessment methods are not considered in this standard but are the subject of other standards (e.g., IEEE Std 1528TM-2003 [B37]).<br />\n
          This document provides standard test methods for determining compliance with regulatory requirements for many types of unlicensed wireless devices. These unlicensed wireless devices include, but are not limited to, the following:<br />\n
          -Remote control and security unlicensed wireless devices<br />\n
          -Frequency hopping and direct sequence spread spectrum devices<br />\n
          -Digital transmission system devices<br />\n
          -Antipilferage devices<br />\n
          -Cordless telephones<br />\n
          -Radio frequency identification (RFID) tag readers<br />\n
          -Unlicensed National Information Infrastructure devices<br />\n
          -Intrusion detectors<br />\n
          -Unlicensed wireless devices operating below 30 MHz<br />\n
          -Wireless (garage) door openers<br />\n
          -Ultra-wideband (UWB) devices<br />\n
          -Automatic vehicle identification systems<br />\n
          -Inductive devices
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107011 …}
    #channels: Doctrine\ORM\PersistentCollection {#107017 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107013 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107015 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107003 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106996
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1612220400 {#106966
      date: 2021-02-02 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1379023200 {#106965
      date: 2013-09-13 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1379023200 {#107001
      date: 2013-09-13 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 253
    -documents: Doctrine\ORM\PersistentCollection {#107005 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107007 …}
  }
]

App\Twig\Components\ProductMostRecent {#107491
  +product: App\Entity\Product\Product {#107002
    #id: 11182
    #code: "IEEE00005690"
    #attributes: Doctrine\ORM\PersistentCollection {#107019 …}
    #variants: Doctrine\ORM\PersistentCollection {#107021 …}
    #options: Doctrine\ORM\PersistentCollection {#107025 …}
    #associations: Doctrine\ORM\PersistentCollection {#107023 …}
    #createdAt: DateTime @1751039531 {#106998
      date: 2025-06-27 17:52:11.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#106997
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107009 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107424
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107002}
        #id: 39737
        #name: "IEEE/ANSI C63.10:2013"
        #slug: "ieee-ansi-c63-10-2013-ieee00005690-242834"
        #description: """
          Revision Standard - Superseded.<br />\n
          The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product-specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          Uses of the word shall in this standard indicate a mandatory requirement that must be met to satisfy this standard. The word should is used to indicate that a requirement is recommended but not mandatory. Tolerances on dimensions and distances are based on good engineering practice where not specified. The word may is used to indicate a recommendation that is at the discretion of the user. In addition, notes in this document are informative and are not part of the requirements. In this standard, the text takes precedence over the figures because the text is complete and the figures are illustrative of a typical application of the text. Notes are used in the text for emphasis or to offer informative suggestions about the technical content of the standard, and provide additional information to assist the reader with a particular passage, but they do not include mandatory requirements. Footnotes in text are included only for information, clarification,and/or aid applicable to the use of the standard, but mandatory requirements are not included in text footnotes.<br />\n
          Measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices, as described in 1.2. Definitions are provided for terms and phrases contained in the text, in which the words do not represent obvious or common usage. In most cases, measurement instrumentation and calibration requirements are only generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main text is augmented by a series of annexes that provide details for certain measurement methods and facilities.<br />\n
          Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It represents a consolidation and elucidation of procedures that were heretofore dispersed throughout many documents. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.<br />\n
          This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as Unlicensed Personal Communication Services devices, which are covered in ANSI C63.17-2006 [B3].1 Procedures for evaluating dynamic frequency selection (DFS) functionality (i.e., required for U-NII devices in the United States) and for television-band unlicensed wireless devices2 are not addressed in this standard. This standard also does not cover measurement of emissions from radio receivers, the receiver portion of a transceiver, and other types of unintentional radiators, which are covered by other standards (e.g., ANSI C63.4).3 This standard does not cover other types of unintentional radiators (e.g., industrial, scientific, and medical (ISM) equipment). In addition, many types of unlicensed wireless devices are also subject to regulatory requirements concerning human exposure to RF energy; RF exposure conformity assessment methods are not considered in this standard but are the subject of other standards (e.g., IEEE Std 1528TM-2003 [B37]).<br />\n
          This document provides standard test methods for determining compliance with regulatory requirements for many types of unlicensed wireless devices. These unlicensed wireless devices include, but are not limited to, the following:<br />\n
          -Remote control and security unlicensed wireless devices<br />\n
          -Frequency hopping and direct sequence spread spectrum devices<br />\n
          -Digital transmission system devices<br />\n
          -Antipilferage devices<br />\n
          -Cordless telephones<br />\n
          -Radio frequency identification (RFID) tag readers<br />\n
          -Unlicensed National Information Infrastructure devices<br />\n
          -Intrusion detectors<br />\n
          -Unlicensed wireless devices operating below 30 MHz<br />\n
          -Wireless (garage) door openers<br />\n
          -Ultra-wideband (UWB) devices<br />\n
          -Automatic vehicle identification systems<br />\n
          -Inductive devices
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107011 …}
    #channels: Doctrine\ORM\PersistentCollection {#107017 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107013 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107015 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107003 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106996
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1612220400 {#106966
      date: 2021-02-02 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1379023200 {#106965
      date: 2013-09-13 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1379023200 {#107001
      date: 2013-09-13 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 253
    -documents: Doctrine\ORM\PersistentCollection {#107005 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107007 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#107033
    #id: 10617
    #code: "IEEE00004713"
    #attributes: Doctrine\ORM\PersistentCollection {#107050 …}
    #variants: Doctrine\ORM\PersistentCollection {#107052 …}
    #options: Doctrine\ORM\PersistentCollection {#107056 …}
    #associations: Doctrine\ORM\PersistentCollection {#107054 …}
    #createdAt: DateTime @1751039176 {#107027
      date: 2025-06-27 17:46:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#107028
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107040 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107557
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107033}
        #id: 37477
        #name: "IEEE/ANSI C63.10:2009"
        #slug: "ieee-ansi-c63-10-2009-ieee00004713-242269"
        #description: """
           - Superseded.<br />\n
          This standard is intended to cover procedures for testing the compliance of a wide variety of unlicensed wireless devices (also called unlicensed intentional radiators) including but<br />\n
          not limited to: remote control and security unlicensed wireless devices, frequency hopping and<br />\n
          direct sequence spread spectrum devices, anti-pilferage devices, cordless telephones, medical<br />\n
          unlicensed wireless devices, Unlicensed National Information Infrastructure devices, intrusion<br />\n
          detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle<br />\n
          identification systems, and other unlicensed wireless devices authorized by a radio regulatory<br />\n
          authority. The test procedures for new technology wireless devices will be added to future<br />\n
          editions of this standard as soon as practical after consensus is achieved for compliance testing<br />\n
          methods of the new devices. However, this standard excludes test procedures for unlicensed<br />\n
          wireless devices already covered in other published standards, e.g., Unlicensed Personal<br />\n
          Communication Services (UPCS) devices<br />\n
          \t\t\t\t<br />\n
          This consensus standard specifies methods, instrumentation, and facilities requirements for measurement of radio-frequency (RF) signals and RF noise emitted from unlicensed wireless devices. It does not include generic nor product-specific emission limits. Measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices, as described below. This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as Unlicensed Personal Communication Services (UPCS) devices, which are covered in ANSI C63.17 [B1].1 In addition, many types of wireless devices are also subject to regulatory requirements concerning human exposure to RF energy; RF exposure conformity assessment methods are not considered in this standard, but are the subject of other standards, e.g., IEEE Std 1528™-2003 [B22].<br />\n
          This document provides standard test methods for determining compliance with regulatory requirements<br />\n
          for many types of wireless devices.<br />\n
          A wide variety of unlicensed wireless devices (also known as intentional radiators) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of present wireless devices in wide use. It represents a consolidation and elucidation of procedures that were heretofore dispersed throughout a number of documents, which caused confusion regarding where to find the appropriate test method. It is not expected that all of the wireless devices on the market will in fact be covered by this standard. For example, this standard excludes test procedures for unlicensed wireless devices already covered in other published standards; e.g., Unlicensed Personal Communication Services devices. Also, as new measurement methods mature, this standard will be amended or a follow-up standard developed to present the new method. It is also expected that the ASC C63® Committee that developed this standard will provide a forum for test laboratories, manufacturers, and government agencies to determine the need for additions and amendments of this standard to accommodate new wireless devices in the future.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Testing Unlicensed Wireless Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107042 …}
    #channels: Doctrine\ORM\PersistentCollection {#107048 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107044 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107046 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107034 …}
    -apiLastModifiedAt: DateTime @1754517600 {#107029
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1612220400 {#107030
      date: 2021-02-02 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1252533600 {#107031
      date: 2009-09-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1252533600 {#107032
      date: 2009-09-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 119
    -documents: Doctrine\ORM\PersistentCollection {#107036 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107038 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107572
  +product: App\Entity\Product\Product {#107033
    #id: 10617
    #code: "IEEE00004713"
    #attributes: Doctrine\ORM\PersistentCollection {#107050 …}
    #variants: Doctrine\ORM\PersistentCollection {#107052 …}
    #options: Doctrine\ORM\PersistentCollection {#107056 …}
    #associations: Doctrine\ORM\PersistentCollection {#107054 …}
    #createdAt: DateTime @1751039176 {#107027
      date: 2025-06-27 17:46:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#107028
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107040 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107557
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107033}
        #id: 37477
        #name: "IEEE/ANSI C63.10:2009"
        #slug: "ieee-ansi-c63-10-2009-ieee00004713-242269"
        #description: """
           - Superseded.<br />\n
          This standard is intended to cover procedures for testing the compliance of a wide variety of unlicensed wireless devices (also called unlicensed intentional radiators) including but<br />\n
          not limited to: remote control and security unlicensed wireless devices, frequency hopping and<br />\n
          direct sequence spread spectrum devices, anti-pilferage devices, cordless telephones, medical<br />\n
          unlicensed wireless devices, Unlicensed National Information Infrastructure devices, intrusion<br />\n
          detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle<br />\n
          identification systems, and other unlicensed wireless devices authorized by a radio regulatory<br />\n
          authority. The test procedures for new technology wireless devices will be added to future<br />\n
          editions of this standard as soon as practical after consensus is achieved for compliance testing<br />\n
          methods of the new devices. However, this standard excludes test procedures for unlicensed<br />\n
          wireless devices already covered in other published standards, e.g., Unlicensed Personal<br />\n
          Communication Services (UPCS) devices<br />\n
          \t\t\t\t<br />\n
          This consensus standard specifies methods, instrumentation, and facilities requirements for measurement of radio-frequency (RF) signals and RF noise emitted from unlicensed wireless devices. It does not include generic nor product-specific emission limits. Measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices, as described below. This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as Unlicensed Personal Communication Services (UPCS) devices, which are covered in ANSI C63.17 [B1].1 In addition, many types of wireless devices are also subject to regulatory requirements concerning human exposure to RF energy; RF exposure conformity assessment methods are not considered in this standard, but are the subject of other standards, e.g., IEEE Std 1528™-2003 [B22].<br />\n
          This document provides standard test methods for determining compliance with regulatory requirements<br />\n
          for many types of wireless devices.<br />\n
          A wide variety of unlicensed wireless devices (also known as intentional radiators) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of present wireless devices in wide use. It represents a consolidation and elucidation of procedures that were heretofore dispersed throughout a number of documents, which caused confusion regarding where to find the appropriate test method. It is not expected that all of the wireless devices on the market will in fact be covered by this standard. For example, this standard excludes test procedures for unlicensed wireless devices already covered in other published standards; e.g., Unlicensed Personal Communication Services devices. Also, as new measurement methods mature, this standard will be amended or a follow-up standard developed to present the new method. It is also expected that the ASC C63® Committee that developed this standard will provide a forum for test laboratories, manufacturers, and government agencies to determine the need for additions and amendments of this standard to accommodate new wireless devices in the future.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Testing Unlicensed Wireless Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107042 …}
    #channels: Doctrine\ORM\PersistentCollection {#107048 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107044 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107046 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107034 …}
    -apiLastModifiedAt: DateTime @1754517600 {#107029
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1612220400 {#107030
      date: 2021-02-02 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1252533600 {#107031
      date: 2009-09-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1252533600 {#107032
      date: 2009-09-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 119
    -documents: Doctrine\ORM\PersistentCollection {#107036 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107038 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#107033
    #id: 10617
    #code: "IEEE00004713"
    #attributes: Doctrine\ORM\PersistentCollection {#107050 …}
    #variants: Doctrine\ORM\PersistentCollection {#107052 …}
    #options: Doctrine\ORM\PersistentCollection {#107056 …}
    #associations: Doctrine\ORM\PersistentCollection {#107054 …}
    #createdAt: DateTime @1751039176 {#107027
      date: 2025-06-27 17:46:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#107028
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107040 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107557
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107033}
        #id: 37477
        #name: "IEEE/ANSI C63.10:2009"
        #slug: "ieee-ansi-c63-10-2009-ieee00004713-242269"
        #description: """
           - Superseded.<br />\n
          This standard is intended to cover procedures for testing the compliance of a wide variety of unlicensed wireless devices (also called unlicensed intentional radiators) including but<br />\n
          not limited to: remote control and security unlicensed wireless devices, frequency hopping and<br />\n
          direct sequence spread spectrum devices, anti-pilferage devices, cordless telephones, medical<br />\n
          unlicensed wireless devices, Unlicensed National Information Infrastructure devices, intrusion<br />\n
          detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle<br />\n
          identification systems, and other unlicensed wireless devices authorized by a radio regulatory<br />\n
          authority. The test procedures for new technology wireless devices will be added to future<br />\n
          editions of this standard as soon as practical after consensus is achieved for compliance testing<br />\n
          methods of the new devices. However, this standard excludes test procedures for unlicensed<br />\n
          wireless devices already covered in other published standards, e.g., Unlicensed Personal<br />\n
          Communication Services (UPCS) devices<br />\n
          \t\t\t\t<br />\n
          This consensus standard specifies methods, instrumentation, and facilities requirements for measurement of radio-frequency (RF) signals and RF noise emitted from unlicensed wireless devices. It does not include generic nor product-specific emission limits. Measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices, as described below. This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as Unlicensed Personal Communication Services (UPCS) devices, which are covered in ANSI C63.17 [B1].1 In addition, many types of wireless devices are also subject to regulatory requirements concerning human exposure to RF energy; RF exposure conformity assessment methods are not considered in this standard, but are the subject of other standards, e.g., IEEE Std 1528™-2003 [B22].<br />\n
          This document provides standard test methods for determining compliance with regulatory requirements<br />\n
          for many types of wireless devices.<br />\n
          A wide variety of unlicensed wireless devices (also known as intentional radiators) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of present wireless devices in wide use. It represents a consolidation and elucidation of procedures that were heretofore dispersed throughout a number of documents, which caused confusion regarding where to find the appropriate test method. It is not expected that all of the wireless devices on the market will in fact be covered by this standard. For example, this standard excludes test procedures for unlicensed wireless devices already covered in other published standards; e.g., Unlicensed Personal Communication Services devices. Also, as new measurement methods mature, this standard will be amended or a follow-up standard developed to present the new method. It is also expected that the ASC C63® Committee that developed this standard will provide a forum for test laboratories, manufacturers, and government agencies to determine the need for additions and amendments of this standard to accommodate new wireless devices in the future.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Testing Unlicensed Wireless Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107042 …}
    #channels: Doctrine\ORM\PersistentCollection {#107048 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107044 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107046 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107034 …}
    -apiLastModifiedAt: DateTime @1754517600 {#107029
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1612220400 {#107030
      date: 2021-02-02 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1252533600 {#107031
      date: 2009-09-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1252533600 {#107032
      date: 2009-09-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 119
    -documents: Doctrine\ORM\PersistentCollection {#107036 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107038 …}
  }
]

App\Twig\Components\ProductMostRecent {#107624
  +product: App\Entity\Product\Product {#107033
    #id: 10617
    #code: "IEEE00004713"
    #attributes: Doctrine\ORM\PersistentCollection {#107050 …}
    #variants: Doctrine\ORM\PersistentCollection {#107052 …}
    #options: Doctrine\ORM\PersistentCollection {#107056 …}
    #associations: Doctrine\ORM\PersistentCollection {#107054 …}
    #createdAt: DateTime @1751039176 {#107027
      date: 2025-06-27 17:46:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#107028
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#107040 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107557
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#107033}
        #id: 37477
        #name: "IEEE/ANSI C63.10:2009"
        #slug: "ieee-ansi-c63-10-2009-ieee00004713-242269"
        #description: """
           - Superseded.<br />\n
          This standard is intended to cover procedures for testing the compliance of a wide variety of unlicensed wireless devices (also called unlicensed intentional radiators) including but<br />\n
          not limited to: remote control and security unlicensed wireless devices, frequency hopping and<br />\n
          direct sequence spread spectrum devices, anti-pilferage devices, cordless telephones, medical<br />\n
          unlicensed wireless devices, Unlicensed National Information Infrastructure devices, intrusion<br />\n
          detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle<br />\n
          identification systems, and other unlicensed wireless devices authorized by a radio regulatory<br />\n
          authority. The test procedures for new technology wireless devices will be added to future<br />\n
          editions of this standard as soon as practical after consensus is achieved for compliance testing<br />\n
          methods of the new devices. However, this standard excludes test procedures for unlicensed<br />\n
          wireless devices already covered in other published standards, e.g., Unlicensed Personal<br />\n
          Communication Services (UPCS) devices<br />\n
          \t\t\t\t<br />\n
          This consensus standard specifies methods, instrumentation, and facilities requirements for measurement of radio-frequency (RF) signals and RF noise emitted from unlicensed wireless devices. It does not include generic nor product-specific emission limits. Measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices, as described below. This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as Unlicensed Personal Communication Services (UPCS) devices, which are covered in ANSI C63.17 [B1].1 In addition, many types of wireless devices are also subject to regulatory requirements concerning human exposure to RF energy; RF exposure conformity assessment methods are not considered in this standard, but are the subject of other standards, e.g., IEEE Std 1528™-2003 [B22].<br />\n
          This document provides standard test methods for determining compliance with regulatory requirements<br />\n
          for many types of wireless devices.<br />\n
          A wide variety of unlicensed wireless devices (also known as intentional radiators) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of present wireless devices in wide use. It represents a consolidation and elucidation of procedures that were heretofore dispersed throughout a number of documents, which caused confusion regarding where to find the appropriate test method. It is not expected that all of the wireless devices on the market will in fact be covered by this standard. For example, this standard excludes test procedures for unlicensed wireless devices already covered in other published standards; e.g., Unlicensed Personal Communication Services devices. Also, as new measurement methods mature, this standard will be amended or a follow-up standard developed to present the new method. It is also expected that the ASC C63® Committee that developed this standard will provide a forum for test laboratories, manufacturers, and government agencies to determine the need for additions and amendments of this standard to accommodate new wireless devices in the future.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Testing Unlicensed Wireless Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#107042 …}
    #channels: Doctrine\ORM\PersistentCollection {#107048 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#107044 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#107046 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#107034 …}
    -apiLastModifiedAt: DateTime @1754517600 {#107029
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1612220400 {#107030
      date: 2021-02-02 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1252533600 {#107031
      date: 2009-09-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1252533600 {#107032
      date: 2009-09-10 00:00:00.0 Europe/Paris (+02:00)
    }
    -edition: null
    -coreDocument: "C63.10"
    -bookCollection: ""
    -pageCount: 119
    -documents: Doctrine\ORM\PersistentCollection {#107036 …}
    -favorites: Doctrine\ORM\PersistentCollection {#107038 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}