GET https://dev.normadoc.fr/_partial/cart/summary?template=%40SyliusShop%2FCart%2F_widget.html.twig

Response
200 OK
IP
216.73.216.2
Profiled on
Token
84dbb6

Components

3 Twig Components
5 Render Count
3 ms Render Time
76.0 MiB Memory Usage

Components

Name Metadata Render Count Render Time
ProductState 
"App\Twig\Components\ProductState"
components/ProductState.html.twig 		2 0.58ms
ProductMostRecent 
"App\Twig\Components\ProductMostRecent"
components/ProductMostRecent.html.twig 		2 1.88ms
ProductType 
"App\Twig\Components\ProductType"
components/ProductType.html.twig 		1 0.21ms

Render calls

ProductState App\Twig\Components\ProductState 70.0 MiB 0.31 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751033613 {#7274
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#7322
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757973600 {#7317
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#7292
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#7318
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#92999
  +product: App\Entity\Product\Product {#7310
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751033613 {#7274
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#7322
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757973600 {#7317
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#7292
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#7318
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductType App\Twig\Components\ProductType 70.0 MiB 0.21 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751033613 {#7274
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#7322
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757973600 {#7317
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#7292
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#7318
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductType {#93184
  +product: App\Entity\Product\Product {#7310
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751033613 {#7274
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#7322
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757973600 {#7317
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#7292
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#7318
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Standard"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 70.0 MiB 0.73 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751033613 {#7274
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#7322
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757973600 {#7317
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#7292
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#7318
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#93259
  +product: App\Entity\Product\Product {#7310
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751033613 {#7274
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#7322
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757973600 {#7317
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#7292
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#7318
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductState App\Twig\Components\ProductState 76.0 MiB 0.27 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751033613 {#7274
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#7322
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757973600 {#7317
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#7292
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#7318
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#100058
  +product: App\Entity\Product\Product {#7310
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751033613 {#7274
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#7322
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757973600 {#7317
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#7292
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#7318
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 76.0 MiB 1.15 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751033613 {#7274
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#7322
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757973600 {#7317
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#7292
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#7318
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#100142
  +product: App\Entity\Product\Product {#7310
    #id: 5038
    #code: "ASMEC0001Q_1976"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751033613 {#7274
      date: 2025-06-27 16:13:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1758060731 {#7322
      date: 2025-09-17 00:12:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 20123
        #name: "ASME PTC 24-1976"
        #slug: "asme-ptc-24-1976-asmec0001q-1976-520194"
        #description: "This Code provides directions and rules for the conducting and reporting of performance tests on single or multi-stage ejector units. The primary object of the test measurements described herein is to establish: (a) Ejector capacity in relation to suction pressure; (b) Discharge pressure in relation to suction pressure; (c) The flow rate of the motive fluid in relation to a stipulated pressure and temperature; and (d) Ejector stability; i.e. the relation of motive fluid pressure or the discharge pressure to breakdown and recovery of the pumping action. The rules and procedures of PTC 24 are intended primarily for the test of ejectors in which the motive fluid is steam. They may be used, however, with any motive fluid for which the physical properties are completely and reliably known. The instructions and capacity measurements provide for tests where the suction fluid pumped is air, water vapor, or other gases for which the physical and thermodynamic properties are known. A procedure is provided for tests on gas mixtures in which the components can be separately measured and controlled. If the motive fluid is steam or other condensable vapor, it must be dry (without any moisture)."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Ejectors"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757973600 {#7317
      date: 2025-09-16 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @189298800 {#7292
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @189298800 {#7318
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "PTC.24"
    -bookCollection: ""
    -pageCount: 27
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}