Symfony Profiler

[
  "product" => App\Entity\Product\Product {#7309
    #id: 8518
    #code: "IEEE00000600"
    #attributes: Doctrine\ORM\PersistentCollection {#7702 …}
    #variants: Doctrine\ORM\PersistentCollection {#7745 …}
    #options: Doctrine\ORM\PersistentCollection {#7917 …}
    #associations: Doctrine\ORM\PersistentCollection {#7901 …}
    #createdAt: DateTime @1751037485 {#7274
      date: 2025-06-27 17:18:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#7322
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7923 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7922
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7309}
        #id: 29081
        #name: "IEEE 390:1987 (R2007)"
        #slug: "ieee-390-1987-r2007-ieee00000600-240170"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Pulse transformers for use in electronic equipment are considered. This standard applies to the following transformer types: power output (drivers), impedance matching, interstage coupling, current sensing, and blocking-oscillator transformers. For these transformers, the peak power transmitted ranges from a few milliwatts to many kilowatts, and the peak voltage transmitted ranges from a few volts to many kilovolts. Symbols, performance tests, equivalent circuits, preferred test methods, marking, and service conditions are covered.<br />\n
          \t\t\t\t<br />\n
          This standard pertains to pulse transformers for use in electronic equipment. For the various types of these transformers, the peak power transmitted ranges from a few milliwatts to kilowatts; and the peak voltage transmitted ranges from a few volts to many kilovolts.<br />\n
          These transformers are required to transmit uni polar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. They are typically used as coupling devices in electronic circuits. In blocking oscillators, they are connected to provide positive feedback in the circuit. In radar or similar use, they are used to couple the modulator to a magnetron, a klystron, a traveling-wave tube or a cross-Þeld amplifier load.<br />\n
          Whenever numerical values are indicated in this standard, they may be considered as recommended values. Section 6. describes the preferred transformer test methods and Appendix A contains alternate test methods<br />\n
          The purpose of this standard is to provide a common ground between electronic system engineers and pulse transformer design engineers. This standard does not apply to transformers when used in a wire entrance facility to an electric power station. Neither is it intended to include low-power switching-type pulse transformers. These are covered in IEEE Std 272 1970, IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers. This standard pertains to pulse transformers that transmit peak power that averages from a few milliwatts to those that transmit peak power that averages in the kilowatts. Also, the voltage range is from a few peak volts to many peak kilovolts.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Pulse Transformers"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7535 …}
    #channels: Doctrine\ORM\PersistentCollection {#7629 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7614 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7646 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7420 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#7292
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @561164400 {#7318
      date: 1987-10-14 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1190844000 {#7316
      date: 2007-09-27 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#7315
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7466 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7501 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#93068
  +product: App\Entity\Product\Product {#7309
    #id: 8518
    #code: "IEEE00000600"
    #attributes: Doctrine\ORM\PersistentCollection {#7702 …}
    #variants: Doctrine\ORM\PersistentCollection {#7745 …}
    #options: Doctrine\ORM\PersistentCollection {#7917 …}
    #associations: Doctrine\ORM\PersistentCollection {#7901 …}
    #createdAt: DateTime @1751037485 {#7274
      date: 2025-06-27 17:18:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#7322
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7923 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7922
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7309}
        #id: 29081
        #name: "IEEE 390:1987 (R2007)"
        #slug: "ieee-390-1987-r2007-ieee00000600-240170"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Pulse transformers for use in electronic equipment are considered. This standard applies to the following transformer types: power output (drivers), impedance matching, interstage coupling, current sensing, and blocking-oscillator transformers. For these transformers, the peak power transmitted ranges from a few milliwatts to many kilowatts, and the peak voltage transmitted ranges from a few volts to many kilovolts. Symbols, performance tests, equivalent circuits, preferred test methods, marking, and service conditions are covered.<br />\n
          \t\t\t\t<br />\n
          This standard pertains to pulse transformers for use in electronic equipment. For the various types of these transformers, the peak power transmitted ranges from a few milliwatts to kilowatts; and the peak voltage transmitted ranges from a few volts to many kilovolts.<br />\n
          These transformers are required to transmit uni polar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. They are typically used as coupling devices in electronic circuits. In blocking oscillators, they are connected to provide positive feedback in the circuit. In radar or similar use, they are used to couple the modulator to a magnetron, a klystron, a traveling-wave tube or a cross-Þeld amplifier load.<br />\n
          Whenever numerical values are indicated in this standard, they may be considered as recommended values. Section 6. describes the preferred transformer test methods and Appendix A contains alternate test methods<br />\n
          The purpose of this standard is to provide a common ground between electronic system engineers and pulse transformer design engineers. This standard does not apply to transformers when used in a wire entrance facility to an electric power station. Neither is it intended to include low-power switching-type pulse transformers. These are covered in IEEE Std 272 1970, IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers. This standard pertains to pulse transformers that transmit peak power that averages from a few milliwatts to those that transmit peak power that averages in the kilowatts. Also, the voltage range is from a few peak volts to many peak kilovolts.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Pulse Transformers"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7535 …}
    #channels: Doctrine\ORM\PersistentCollection {#7629 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7614 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7646 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7420 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#7292
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @561164400 {#7318
      date: 1987-10-14 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1190844000 {#7316
      date: 2007-09-27 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#7315
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7466 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7501 …}
  }
  +appearance: "state-withdrawn"
  +labels: [
    "Withdrawn"
    "Confirmed"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7309
    #id: 8518
    #code: "IEEE00000600"
    #attributes: Doctrine\ORM\PersistentCollection {#7702 …}
    #variants: Doctrine\ORM\PersistentCollection {#7745 …}
    #options: Doctrine\ORM\PersistentCollection {#7917 …}
    #associations: Doctrine\ORM\PersistentCollection {#7901 …}
    #createdAt: DateTime @1751037485 {#7274
      date: 2025-06-27 17:18:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#7322
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7923 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7922
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7309}
        #id: 29081
        #name: "IEEE 390:1987 (R2007)"
        #slug: "ieee-390-1987-r2007-ieee00000600-240170"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Pulse transformers for use in electronic equipment are considered. This standard applies to the following transformer types: power output (drivers), impedance matching, interstage coupling, current sensing, and blocking-oscillator transformers. For these transformers, the peak power transmitted ranges from a few milliwatts to many kilowatts, and the peak voltage transmitted ranges from a few volts to many kilovolts. Symbols, performance tests, equivalent circuits, preferred test methods, marking, and service conditions are covered.<br />\n
          \t\t\t\t<br />\n
          This standard pertains to pulse transformers for use in electronic equipment. For the various types of these transformers, the peak power transmitted ranges from a few milliwatts to kilowatts; and the peak voltage transmitted ranges from a few volts to many kilovolts.<br />\n
          These transformers are required to transmit uni polar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. They are typically used as coupling devices in electronic circuits. In blocking oscillators, they are connected to provide positive feedback in the circuit. In radar or similar use, they are used to couple the modulator to a magnetron, a klystron, a traveling-wave tube or a cross-Þeld amplifier load.<br />\n
          Whenever numerical values are indicated in this standard, they may be considered as recommended values. Section 6. describes the preferred transformer test methods and Appendix A contains alternate test methods<br />\n
          The purpose of this standard is to provide a common ground between electronic system engineers and pulse transformer design engineers. This standard does not apply to transformers when used in a wire entrance facility to an electric power station. Neither is it intended to include low-power switching-type pulse transformers. These are covered in IEEE Std 272 1970, IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers. This standard pertains to pulse transformers that transmit peak power that averages from a few milliwatts to those that transmit peak power that averages in the kilowatts. Also, the voltage range is from a few peak volts to many peak kilovolts.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Pulse Transformers"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7535 …}
    #channels: Doctrine\ORM\PersistentCollection {#7629 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7614 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7646 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7420 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#7292
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @561164400 {#7318
      date: 1987-10-14 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1190844000 {#7316
      date: 2007-09-27 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#7315
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7466 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7501 …}
  }
]

App\Twig\Components\ProductType {#93261
  +product: App\Entity\Product\Product {#7309
    #id: 8518
    #code: "IEEE00000600"
    #attributes: Doctrine\ORM\PersistentCollection {#7702 …}
    #variants: Doctrine\ORM\PersistentCollection {#7745 …}
    #options: Doctrine\ORM\PersistentCollection {#7917 …}
    #associations: Doctrine\ORM\PersistentCollection {#7901 …}
    #createdAt: DateTime @1751037485 {#7274
      date: 2025-06-27 17:18:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#7322
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7923 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7922
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7309}
        #id: 29081
        #name: "IEEE 390:1987 (R2007)"
        #slug: "ieee-390-1987-r2007-ieee00000600-240170"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Pulse transformers for use in electronic equipment are considered. This standard applies to the following transformer types: power output (drivers), impedance matching, interstage coupling, current sensing, and blocking-oscillator transformers. For these transformers, the peak power transmitted ranges from a few milliwatts to many kilowatts, and the peak voltage transmitted ranges from a few volts to many kilovolts. Symbols, performance tests, equivalent circuits, preferred test methods, marking, and service conditions are covered.<br />\n
          \t\t\t\t<br />\n
          This standard pertains to pulse transformers for use in electronic equipment. For the various types of these transformers, the peak power transmitted ranges from a few milliwatts to kilowatts; and the peak voltage transmitted ranges from a few volts to many kilovolts.<br />\n
          These transformers are required to transmit uni polar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. They are typically used as coupling devices in electronic circuits. In blocking oscillators, they are connected to provide positive feedback in the circuit. In radar or similar use, they are used to couple the modulator to a magnetron, a klystron, a traveling-wave tube or a cross-Þeld amplifier load.<br />\n
          Whenever numerical values are indicated in this standard, they may be considered as recommended values. Section 6. describes the preferred transformer test methods and Appendix A contains alternate test methods<br />\n
          The purpose of this standard is to provide a common ground between electronic system engineers and pulse transformer design engineers. This standard does not apply to transformers when used in a wire entrance facility to an electric power station. Neither is it intended to include low-power switching-type pulse transformers. These are covered in IEEE Std 272 1970, IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers. This standard pertains to pulse transformers that transmit peak power that averages from a few milliwatts to those that transmit peak power that averages in the kilowatts. Also, the voltage range is from a few peak volts to many peak kilovolts.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Pulse Transformers"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7535 …}
    #channels: Doctrine\ORM\PersistentCollection {#7629 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7614 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7646 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7420 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#7292
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @561164400 {#7318
      date: 1987-10-14 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1190844000 {#7316
      date: 2007-09-27 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#7315
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7466 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7501 …}
  }
  +label: "Standard"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7309
    #id: 8518
    #code: "IEEE00000600"
    #attributes: Doctrine\ORM\PersistentCollection {#7702 …}
    #variants: Doctrine\ORM\PersistentCollection {#7745 …}
    #options: Doctrine\ORM\PersistentCollection {#7917 …}
    #associations: Doctrine\ORM\PersistentCollection {#7901 …}
    #createdAt: DateTime @1751037485 {#7274
      date: 2025-06-27 17:18:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#7322
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7923 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7922
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7309}
        #id: 29081
        #name: "IEEE 390:1987 (R2007)"
        #slug: "ieee-390-1987-r2007-ieee00000600-240170"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Pulse transformers for use in electronic equipment are considered. This standard applies to the following transformer types: power output (drivers), impedance matching, interstage coupling, current sensing, and blocking-oscillator transformers. For these transformers, the peak power transmitted ranges from a few milliwatts to many kilowatts, and the peak voltage transmitted ranges from a few volts to many kilovolts. Symbols, performance tests, equivalent circuits, preferred test methods, marking, and service conditions are covered.<br />\n
          \t\t\t\t<br />\n
          This standard pertains to pulse transformers for use in electronic equipment. For the various types of these transformers, the peak power transmitted ranges from a few milliwatts to kilowatts; and the peak voltage transmitted ranges from a few volts to many kilovolts.<br />\n
          These transformers are required to transmit uni polar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. They are typically used as coupling devices in electronic circuits. In blocking oscillators, they are connected to provide positive feedback in the circuit. In radar or similar use, they are used to couple the modulator to a magnetron, a klystron, a traveling-wave tube or a cross-Þeld amplifier load.<br />\n
          Whenever numerical values are indicated in this standard, they may be considered as recommended values. Section 6. describes the preferred transformer test methods and Appendix A contains alternate test methods<br />\n
          The purpose of this standard is to provide a common ground between electronic system engineers and pulse transformer design engineers. This standard does not apply to transformers when used in a wire entrance facility to an electric power station. Neither is it intended to include low-power switching-type pulse transformers. These are covered in IEEE Std 272 1970, IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers. This standard pertains to pulse transformers that transmit peak power that averages from a few milliwatts to those that transmit peak power that averages in the kilowatts. Also, the voltage range is from a few peak volts to many peak kilovolts.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Pulse Transformers"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7535 …}
    #channels: Doctrine\ORM\PersistentCollection {#7629 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7614 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7646 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7420 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#7292
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @561164400 {#7318
      date: 1987-10-14 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1190844000 {#7316
      date: 2007-09-27 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#7315
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7466 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7501 …}
  }
]

App\Twig\Components\ProductMostRecent {#93336
  +product: App\Entity\Product\Product {#7309
    #id: 8518
    #code: "IEEE00000600"
    #attributes: Doctrine\ORM\PersistentCollection {#7702 …}
    #variants: Doctrine\ORM\PersistentCollection {#7745 …}
    #options: Doctrine\ORM\PersistentCollection {#7917 …}
    #associations: Doctrine\ORM\PersistentCollection {#7901 …}
    #createdAt: DateTime @1751037485 {#7274
      date: 2025-06-27 17:18:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#7322
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7923 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7922
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7309}
        #id: 29081
        #name: "IEEE 390:1987 (R2007)"
        #slug: "ieee-390-1987-r2007-ieee00000600-240170"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Pulse transformers for use in electronic equipment are considered. This standard applies to the following transformer types: power output (drivers), impedance matching, interstage coupling, current sensing, and blocking-oscillator transformers. For these transformers, the peak power transmitted ranges from a few milliwatts to many kilowatts, and the peak voltage transmitted ranges from a few volts to many kilovolts. Symbols, performance tests, equivalent circuits, preferred test methods, marking, and service conditions are covered.<br />\n
          \t\t\t\t<br />\n
          This standard pertains to pulse transformers for use in electronic equipment. For the various types of these transformers, the peak power transmitted ranges from a few milliwatts to kilowatts; and the peak voltage transmitted ranges from a few volts to many kilovolts.<br />\n
          These transformers are required to transmit uni polar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. They are typically used as coupling devices in electronic circuits. In blocking oscillators, they are connected to provide positive feedback in the circuit. In radar or similar use, they are used to couple the modulator to a magnetron, a klystron, a traveling-wave tube or a cross-Þeld amplifier load.<br />\n
          Whenever numerical values are indicated in this standard, they may be considered as recommended values. Section 6. describes the preferred transformer test methods and Appendix A contains alternate test methods<br />\n
          The purpose of this standard is to provide a common ground between electronic system engineers and pulse transformer design engineers. This standard does not apply to transformers when used in a wire entrance facility to an electric power station. Neither is it intended to include low-power switching-type pulse transformers. These are covered in IEEE Std 272 1970, IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers. This standard pertains to pulse transformers that transmit peak power that averages from a few milliwatts to those that transmit peak power that averages in the kilowatts. Also, the voltage range is from a few peak volts to many peak kilovolts.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Pulse Transformers"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7535 …}
    #channels: Doctrine\ORM\PersistentCollection {#7629 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7614 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7646 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7420 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#7292
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @561164400 {#7318
      date: 1987-10-14 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1190844000 {#7316
      date: 2007-09-27 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#7315
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7466 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7501 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7309
    #id: 8518
    #code: "IEEE00000600"
    #attributes: Doctrine\ORM\PersistentCollection {#7702 …}
    #variants: Doctrine\ORM\PersistentCollection {#7745 …}
    #options: Doctrine\ORM\PersistentCollection {#7917 …}
    #associations: Doctrine\ORM\PersistentCollection {#7901 …}
    #createdAt: DateTime @1751037485 {#7274
      date: 2025-06-27 17:18:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#7322
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7923 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7922
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7309}
        #id: 29081
        #name: "IEEE 390:1987 (R2007)"
        #slug: "ieee-390-1987-r2007-ieee00000600-240170"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Pulse transformers for use in electronic equipment are considered. This standard applies to the following transformer types: power output (drivers), impedance matching, interstage coupling, current sensing, and blocking-oscillator transformers. For these transformers, the peak power transmitted ranges from a few milliwatts to many kilowatts, and the peak voltage transmitted ranges from a few volts to many kilovolts. Symbols, performance tests, equivalent circuits, preferred test methods, marking, and service conditions are covered.<br />\n
          \t\t\t\t<br />\n
          This standard pertains to pulse transformers for use in electronic equipment. For the various types of these transformers, the peak power transmitted ranges from a few milliwatts to kilowatts; and the peak voltage transmitted ranges from a few volts to many kilovolts.<br />\n
          These transformers are required to transmit uni polar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. They are typically used as coupling devices in electronic circuits. In blocking oscillators, they are connected to provide positive feedback in the circuit. In radar or similar use, they are used to couple the modulator to a magnetron, a klystron, a traveling-wave tube or a cross-Þeld amplifier load.<br />\n
          Whenever numerical values are indicated in this standard, they may be considered as recommended values. Section 6. describes the preferred transformer test methods and Appendix A contains alternate test methods<br />\n
          The purpose of this standard is to provide a common ground between electronic system engineers and pulse transformer design engineers. This standard does not apply to transformers when used in a wire entrance facility to an electric power station. Neither is it intended to include low-power switching-type pulse transformers. These are covered in IEEE Std 272 1970, IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers. This standard pertains to pulse transformers that transmit peak power that averages from a few milliwatts to those that transmit peak power that averages in the kilowatts. Also, the voltage range is from a few peak volts to many peak kilovolts.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Pulse Transformers"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7535 …}
    #channels: Doctrine\ORM\PersistentCollection {#7629 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7614 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7646 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7420 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#7292
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @561164400 {#7318
      date: 1987-10-14 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1190844000 {#7316
      date: 2007-09-27 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#7315
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7466 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7501 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#100337
  +product: App\Entity\Product\Product {#7309
    #id: 8518
    #code: "IEEE00000600"
    #attributes: Doctrine\ORM\PersistentCollection {#7702 …}
    #variants: Doctrine\ORM\PersistentCollection {#7745 …}
    #options: Doctrine\ORM\PersistentCollection {#7917 …}
    #associations: Doctrine\ORM\PersistentCollection {#7901 …}
    #createdAt: DateTime @1751037485 {#7274
      date: 2025-06-27 17:18:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#7322
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7923 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7922
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7309}
        #id: 29081
        #name: "IEEE 390:1987 (R2007)"
        #slug: "ieee-390-1987-r2007-ieee00000600-240170"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Pulse transformers for use in electronic equipment are considered. This standard applies to the following transformer types: power output (drivers), impedance matching, interstage coupling, current sensing, and blocking-oscillator transformers. For these transformers, the peak power transmitted ranges from a few milliwatts to many kilowatts, and the peak voltage transmitted ranges from a few volts to many kilovolts. Symbols, performance tests, equivalent circuits, preferred test methods, marking, and service conditions are covered.<br />\n
          \t\t\t\t<br />\n
          This standard pertains to pulse transformers for use in electronic equipment. For the various types of these transformers, the peak power transmitted ranges from a few milliwatts to kilowatts; and the peak voltage transmitted ranges from a few volts to many kilovolts.<br />\n
          These transformers are required to transmit uni polar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. They are typically used as coupling devices in electronic circuits. In blocking oscillators, they are connected to provide positive feedback in the circuit. In radar or similar use, they are used to couple the modulator to a magnetron, a klystron, a traveling-wave tube or a cross-Þeld amplifier load.<br />\n
          Whenever numerical values are indicated in this standard, they may be considered as recommended values. Section 6. describes the preferred transformer test methods and Appendix A contains alternate test methods<br />\n
          The purpose of this standard is to provide a common ground between electronic system engineers and pulse transformer design engineers. This standard does not apply to transformers when used in a wire entrance facility to an electric power station. Neither is it intended to include low-power switching-type pulse transformers. These are covered in IEEE Std 272 1970, IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers. This standard pertains to pulse transformers that transmit peak power that averages from a few milliwatts to those that transmit peak power that averages in the kilowatts. Also, the voltage range is from a few peak volts to many peak kilovolts.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Pulse Transformers"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7535 …}
    #channels: Doctrine\ORM\PersistentCollection {#7629 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7614 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7646 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7420 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#7292
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @561164400 {#7318
      date: 1987-10-14 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1190844000 {#7316
      date: 2007-09-27 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#7315
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7466 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7501 …}
  }
  +appearance: "state-withdrawn"
  +labels: [
    "Withdrawn"
    "Confirmed"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7309
    #id: 8518
    #code: "IEEE00000600"
    #attributes: Doctrine\ORM\PersistentCollection {#7702 …}
    #variants: Doctrine\ORM\PersistentCollection {#7745 …}
    #options: Doctrine\ORM\PersistentCollection {#7917 …}
    #associations: Doctrine\ORM\PersistentCollection {#7901 …}
    #createdAt: DateTime @1751037485 {#7274
      date: 2025-06-27 17:18:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#7322
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7923 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7922
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7309}
        #id: 29081
        #name: "IEEE 390:1987 (R2007)"
        #slug: "ieee-390-1987-r2007-ieee00000600-240170"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Pulse transformers for use in electronic equipment are considered. This standard applies to the following transformer types: power output (drivers), impedance matching, interstage coupling, current sensing, and blocking-oscillator transformers. For these transformers, the peak power transmitted ranges from a few milliwatts to many kilowatts, and the peak voltage transmitted ranges from a few volts to many kilovolts. Symbols, performance tests, equivalent circuits, preferred test methods, marking, and service conditions are covered.<br />\n
          \t\t\t\t<br />\n
          This standard pertains to pulse transformers for use in electronic equipment. For the various types of these transformers, the peak power transmitted ranges from a few milliwatts to kilowatts; and the peak voltage transmitted ranges from a few volts to many kilovolts.<br />\n
          These transformers are required to transmit uni polar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. They are typically used as coupling devices in electronic circuits. In blocking oscillators, they are connected to provide positive feedback in the circuit. In radar or similar use, they are used to couple the modulator to a magnetron, a klystron, a traveling-wave tube or a cross-Þeld amplifier load.<br />\n
          Whenever numerical values are indicated in this standard, they may be considered as recommended values. Section 6. describes the preferred transformer test methods and Appendix A contains alternate test methods<br />\n
          The purpose of this standard is to provide a common ground between electronic system engineers and pulse transformer design engineers. This standard does not apply to transformers when used in a wire entrance facility to an electric power station. Neither is it intended to include low-power switching-type pulse transformers. These are covered in IEEE Std 272 1970, IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers. This standard pertains to pulse transformers that transmit peak power that averages from a few milliwatts to those that transmit peak power that averages in the kilowatts. Also, the voltage range is from a few peak volts to many peak kilovolts.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Pulse Transformers"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7535 …}
    #channels: Doctrine\ORM\PersistentCollection {#7629 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7614 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7646 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7420 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#7292
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @561164400 {#7318
      date: 1987-10-14 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1190844000 {#7316
      date: 2007-09-27 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#7315
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7466 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7501 …}
  }
]

App\Twig\Components\ProductMostRecent {#100398
  +product: App\Entity\Product\Product {#7309
    #id: 8518
    #code: "IEEE00000600"
    #attributes: Doctrine\ORM\PersistentCollection {#7702 …}
    #variants: Doctrine\ORM\PersistentCollection {#7745 …}
    #options: Doctrine\ORM\PersistentCollection {#7917 …}
    #associations: Doctrine\ORM\PersistentCollection {#7901 …}
    #createdAt: DateTime @1751037485 {#7274
      date: 2025-06-27 17:18:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#7322
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7923 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7922
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7309}
        #id: 29081
        #name: "IEEE 390:1987 (R2007)"
        #slug: "ieee-390-1987-r2007-ieee00000600-240170"
        #description: """
          New IEEE Standard - Inactive-Reserved.<br />\n
          Pulse transformers for use in electronic equipment are considered. This standard applies to the following transformer types: power output (drivers), impedance matching, interstage coupling, current sensing, and blocking-oscillator transformers. For these transformers, the peak power transmitted ranges from a few milliwatts to many kilowatts, and the peak voltage transmitted ranges from a few volts to many kilovolts. Symbols, performance tests, equivalent circuits, preferred test methods, marking, and service conditions are covered.<br />\n
          \t\t\t\t<br />\n
          This standard pertains to pulse transformers for use in electronic equipment. For the various types of these transformers, the peak power transmitted ranges from a few milliwatts to kilowatts; and the peak voltage transmitted ranges from a few volts to many kilovolts.<br />\n
          These transformers are required to transmit uni polar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. They are typically used as coupling devices in electronic circuits. In blocking oscillators, they are connected to provide positive feedback in the circuit. In radar or similar use, they are used to couple the modulator to a magnetron, a klystron, a traveling-wave tube or a cross-Þeld amplifier load.<br />\n
          Whenever numerical values are indicated in this standard, they may be considered as recommended values. Section 6. describes the preferred transformer test methods and Appendix A contains alternate test methods<br />\n
          The purpose of this standard is to provide a common ground between electronic system engineers and pulse transformer design engineers. This standard does not apply to transformers when used in a wire entrance facility to an electric power station. Neither is it intended to include low-power switching-type pulse transformers. These are covered in IEEE Std 272 1970, IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers. This standard pertains to pulse transformers that transmit peak power that averages from a few milliwatts to those that transmit peak power that averages in the kilowatts. Also, the voltage range is from a few peak volts to many peak kilovolts.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Pulse Transformers"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7535 …}
    #channels: Doctrine\ORM\PersistentCollection {#7629 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7614 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7646 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7420 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#7292
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @561164400 {#7318
      date: 1987-10-14 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @1190844000 {#7316
      date: 2007-09-27 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: DateTime @1573081200 {#7315
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7466 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7501 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#100325
    #id: 11672
    #code: "IEEE00006432"
    #attributes: Doctrine\ORM\PersistentCollection {#100296 …}
    #variants: Doctrine\ORM\PersistentCollection {#100293 …}
    #options: Doctrine\ORM\PersistentCollection {#100289 …}
    #associations: Doctrine\ORM\PersistentCollection {#100291 …}
    #createdAt: DateTime @1751039885 {#100319
      date: 2025-06-27 17:58:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#100320
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100307 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100472
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100325}
        #id: 41697
        #name: "IEEE 390:1975"
        #slug: "ieee-390-1975-ieee00006432-243324"
        #description: """
           - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          This standard pertains t o small low-power pulse transformers for use in electronic equipment, transmitting peak power of 300 W or less and average power of 5W or less with a peak working voltage of 1000 V or less. These transformers are required to transform unipolar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. This standard is not intended to include low-power switching type pulse transformers which are covered in IEEE Std 272-1970, Standard for Computer-Type (Square-Loop) Pulse Transformers. These transformers depend upon the use of square - loop core material for operation, have memory capability, and normally transmit only bipolar pulses unless provision is made for core flux reset. This standard is not intended to include transformers for power conversion applications. T h o s e transformers will be covered in a related standard. Whenever numerical values are indicated they may be considered as recommended values. Section 2 contains definitions of terms pertaining primarily to functional testing of low-power pulse transformers, and Section 5 contains equivalent circuits a n d definitions of associated terms. Section 6 describes preferred transformer test methods and the appendix contains alternate test methods.<br />\n
          The purpose of this standard is to provide a common ground of understanding between electronic system engineers and pulse transformer design engineers. It pertains to low-power pulse transformers for use in electronic equipment. It does not include computer-type (square-loop) pulse transformers, which depend upon the use of square-loop core material for operation. Those transformers, often referred to as &quot; switching &quot; or &quot; square - loop &quot; types, are covered in IEEE Std 272-1970, Standard for Computer - Type (Square-Loop) Pulse Transformers. High-power pulse transformers will be covered in a related standard.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Low Power Pulse Transformers"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100304 …}
    #channels: Doctrine\ORM\PersistentCollection {#100298 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100302 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100300 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100279 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100281
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#100294
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @172278000 {#100321
      date: 1975-06-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#100311 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100309 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#100487
  +product: App\Entity\Product\Product {#100325
    #id: 11672
    #code: "IEEE00006432"
    #attributes: Doctrine\ORM\PersistentCollection {#100296 …}
    #variants: Doctrine\ORM\PersistentCollection {#100293 …}
    #options: Doctrine\ORM\PersistentCollection {#100289 …}
    #associations: Doctrine\ORM\PersistentCollection {#100291 …}
    #createdAt: DateTime @1751039885 {#100319
      date: 2025-06-27 17:58:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#100320
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100307 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100472
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100325}
        #id: 41697
        #name: "IEEE 390:1975"
        #slug: "ieee-390-1975-ieee00006432-243324"
        #description: """
           - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          This standard pertains t o small low-power pulse transformers for use in electronic equipment, transmitting peak power of 300 W or less and average power of 5W or less with a peak working voltage of 1000 V or less. These transformers are required to transform unipolar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. This standard is not intended to include low-power switching type pulse transformers which are covered in IEEE Std 272-1970, Standard for Computer-Type (Square-Loop) Pulse Transformers. These transformers depend upon the use of square - loop core material for operation, have memory capability, and normally transmit only bipolar pulses unless provision is made for core flux reset. This standard is not intended to include transformers for power conversion applications. T h o s e transformers will be covered in a related standard. Whenever numerical values are indicated they may be considered as recommended values. Section 2 contains definitions of terms pertaining primarily to functional testing of low-power pulse transformers, and Section 5 contains equivalent circuits a n d definitions of associated terms. Section 6 describes preferred transformer test methods and the appendix contains alternate test methods.<br />\n
          The purpose of this standard is to provide a common ground of understanding between electronic system engineers and pulse transformer design engineers. It pertains to low-power pulse transformers for use in electronic equipment. It does not include computer-type (square-loop) pulse transformers, which depend upon the use of square-loop core material for operation. Those transformers, often referred to as &quot; switching &quot; or &quot; square - loop &quot; types, are covered in IEEE Std 272-1970, Standard for Computer - Type (Square-Loop) Pulse Transformers. High-power pulse transformers will be covered in a related standard.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Low Power Pulse Transformers"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100304 …}
    #channels: Doctrine\ORM\PersistentCollection {#100298 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100302 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100300 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100279 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100281
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#100294
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @172278000 {#100321
      date: 1975-06-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#100311 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100309 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#100325
    #id: 11672
    #code: "IEEE00006432"
    #attributes: Doctrine\ORM\PersistentCollection {#100296 …}
    #variants: Doctrine\ORM\PersistentCollection {#100293 …}
    #options: Doctrine\ORM\PersistentCollection {#100289 …}
    #associations: Doctrine\ORM\PersistentCollection {#100291 …}
    #createdAt: DateTime @1751039885 {#100319
      date: 2025-06-27 17:58:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#100320
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100307 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100472
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100325}
        #id: 41697
        #name: "IEEE 390:1975"
        #slug: "ieee-390-1975-ieee00006432-243324"
        #description: """
           - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          This standard pertains t o small low-power pulse transformers for use in electronic equipment, transmitting peak power of 300 W or less and average power of 5W or less with a peak working voltage of 1000 V or less. These transformers are required to transform unipolar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. This standard is not intended to include low-power switching type pulse transformers which are covered in IEEE Std 272-1970, Standard for Computer-Type (Square-Loop) Pulse Transformers. These transformers depend upon the use of square - loop core material for operation, have memory capability, and normally transmit only bipolar pulses unless provision is made for core flux reset. This standard is not intended to include transformers for power conversion applications. T h o s e transformers will be covered in a related standard. Whenever numerical values are indicated they may be considered as recommended values. Section 2 contains definitions of terms pertaining primarily to functional testing of low-power pulse transformers, and Section 5 contains equivalent circuits a n d definitions of associated terms. Section 6 describes preferred transformer test methods and the appendix contains alternate test methods.<br />\n
          The purpose of this standard is to provide a common ground of understanding between electronic system engineers and pulse transformer design engineers. It pertains to low-power pulse transformers for use in electronic equipment. It does not include computer-type (square-loop) pulse transformers, which depend upon the use of square-loop core material for operation. Those transformers, often referred to as &quot; switching &quot; or &quot; square - loop &quot; types, are covered in IEEE Std 272-1970, Standard for Computer - Type (Square-Loop) Pulse Transformers. High-power pulse transformers will be covered in a related standard.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Low Power Pulse Transformers"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100304 …}
    #channels: Doctrine\ORM\PersistentCollection {#100298 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100302 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100300 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100279 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100281
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#100294
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @172278000 {#100321
      date: 1975-06-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#100311 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100309 …}
  }
]

App\Twig\Components\ProductMostRecent {#100539
  +product: App\Entity\Product\Product {#100325
    #id: 11672
    #code: "IEEE00006432"
    #attributes: Doctrine\ORM\PersistentCollection {#100296 …}
    #variants: Doctrine\ORM\PersistentCollection {#100293 …}
    #options: Doctrine\ORM\PersistentCollection {#100289 …}
    #associations: Doctrine\ORM\PersistentCollection {#100291 …}
    #createdAt: DateTime @1751039885 {#100319
      date: 2025-06-27 17:58:05.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#100320
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#100307 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#100472
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#100325}
        #id: 41697
        #name: "IEEE 390:1975"
        #slug: "ieee-390-1975-ieee00006432-243324"
        #description: """
           - Superseded.<br />\n
          <br />\n
          \t\t\t\t<br />\n
          This standard pertains t o small low-power pulse transformers for use in electronic equipment, transmitting peak power of 300 W or less and average power of 5W or less with a peak working voltage of 1000 V or less. These transformers are required to transform unipolar or bipolar pulses of voltage or current within specified tolerances of amplitude and time when operated between specified impedance. This standard is not intended to include low-power switching type pulse transformers which are covered in IEEE Std 272-1970, Standard for Computer-Type (Square-Loop) Pulse Transformers. These transformers depend upon the use of square - loop core material for operation, have memory capability, and normally transmit only bipolar pulses unless provision is made for core flux reset. This standard is not intended to include transformers for power conversion applications. T h o s e transformers will be covered in a related standard. Whenever numerical values are indicated they may be considered as recommended values. Section 2 contains definitions of terms pertaining primarily to functional testing of low-power pulse transformers, and Section 5 contains equivalent circuits a n d definitions of associated terms. Section 6 describes preferred transformer test methods and the appendix contains alternate test methods.<br />\n
          The purpose of this standard is to provide a common ground of understanding between electronic system engineers and pulse transformer design engineers. It pertains to low-power pulse transformers for use in electronic equipment. It does not include computer-type (square-loop) pulse transformers, which depend upon the use of square-loop core material for operation. Those transformers, often referred to as &quot; switching &quot; or &quot; square - loop &quot; types, are covered in IEEE Std 272-1970, Standard for Computer - Type (Square-Loop) Pulse Transformers. High-power pulse transformers will be covered in a related standard.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Low Power Pulse Transformers"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#100304 …}
    #channels: Doctrine\ORM\PersistentCollection {#100298 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#100302 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#100300 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#100279 …}
    -apiLastModifiedAt: DateTime @1754517600 {#100281
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#100294
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @172278000 {#100321
      date: 1975-06-18 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "390"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#100311 …}
    -favorites: Doctrine\ORM\PersistentCollection {#100309 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#121937
    #id: 8423
    #code: "IEEE00000450"
    #attributes: Doctrine\ORM\PersistentCollection {#121961 …}
    #variants: Doctrine\ORM\PersistentCollection {#121959 …}
    #options: Doctrine\ORM\PersistentCollection {#121954 …}
    #associations: Doctrine\ORM\PersistentCollection {#121956 …}
    #createdAt: DateTime @1751037404 {#121952
      date: 2025-06-27 17:16:44.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121986
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#121972 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#122162
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121937}
        #id: 28701
        #name: "IEEE 266:1969 (R1981)"
        #slug: "ieee-266-1969-r1981-ieee00000450-240075"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          The intent of this Test Procedure is to establish a uniform method by which the life of electronics transformer insulation systems can be compared. Thermal degradation is generally one of the major factors affecting the life of most insulating materials. It was chosen to be the major environmental factor in this Test Procedure. Other environmental factors, such as vibration, thermal shock, and moisture, have been included to simulate operating conditions. These factors have been chosen in such a way as to develop and disclose promptly any significant weaknesses during the temperature aging of an insulation system.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Test Procedure for Evaluation of Insulation Systems for Electronics Power Transformers"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121969 …}
    #channels: Doctrine\ORM\PersistentCollection {#121963 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#121967 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#121965 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121978 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121938
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#121980
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-26528400 {#121987
      date: 1969-02-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @347151600 {#121945
      date: 1981-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: DateTime @691887600 {#121979
      date: 1991-12-05 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "266"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#121976 …}
    -favorites: Doctrine\ORM\PersistentCollection {#121974 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "additionalClasses" => "product__teaser--with-grey-border"
  "hasStretchedLink" => true
  "hoverType" => "shadow"
  "linkLabel" => "See more"
]

App\Twig\Components\ProductCard {#122084
  +product: App\Entity\Product\Product {#121937
    #id: 8423
    #code: "IEEE00000450"
    #attributes: Doctrine\ORM\PersistentCollection {#121961 …}
    #variants: Doctrine\ORM\PersistentCollection {#121959 …}
    #options: Doctrine\ORM\PersistentCollection {#121954 …}
    #associations: Doctrine\ORM\PersistentCollection {#121956 …}
    #createdAt: DateTime @1751037404 {#121952
      date: 2025-06-27 17:16:44.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121986
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#121972 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#122162
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121937}
        #id: 28701
        #name: "IEEE 266:1969 (R1981)"
        #slug: "ieee-266-1969-r1981-ieee00000450-240075"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          The intent of this Test Procedure is to establish a uniform method by which the life of electronics transformer insulation systems can be compared. Thermal degradation is generally one of the major factors affecting the life of most insulating materials. It was chosen to be the major environmental factor in this Test Procedure. Other environmental factors, such as vibration, thermal shock, and moisture, have been included to simulate operating conditions. These factors have been chosen in such a way as to develop and disclose promptly any significant weaknesses during the temperature aging of an insulation system.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Test Procedure for Evaluation of Insulation Systems for Electronics Power Transformers"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121969 …}
    #channels: Doctrine\ORM\PersistentCollection {#121963 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#121967 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#121965 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121978 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121938
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#121980
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-26528400 {#121987
      date: 1969-02-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @347151600 {#121945
      date: 1981-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: DateTime @691887600 {#121979
      date: 1991-12-05 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "266"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#121976 …}
    -favorites: Doctrine\ORM\PersistentCollection {#121974 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "product__teaser--with-grey-border"
  +linkLabel: "See more"
  +imageFilter: "product_thumbnail_teaser"
  +hasStretchedLink: true
  +backgroundColor: "white"
  +hoverType: "shadow"
}

[
  "product" => App\Entity\Product\Product {#121937
    #id: 8423
    #code: "IEEE00000450"
    #attributes: Doctrine\ORM\PersistentCollection {#121961 …}
    #variants: Doctrine\ORM\PersistentCollection {#121959 …}
    #options: Doctrine\ORM\PersistentCollection {#121954 …}
    #associations: Doctrine\ORM\PersistentCollection {#121956 …}
    #createdAt: DateTime @1751037404 {#121952
      date: 2025-06-27 17:16:44.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121986
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#121972 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#122162
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121937}
        #id: 28701
        #name: "IEEE 266:1969 (R1981)"
        #slug: "ieee-266-1969-r1981-ieee00000450-240075"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          The intent of this Test Procedure is to establish a uniform method by which the life of electronics transformer insulation systems can be compared. Thermal degradation is generally one of the major factors affecting the life of most insulating materials. It was chosen to be the major environmental factor in this Test Procedure. Other environmental factors, such as vibration, thermal shock, and moisture, have been included to simulate operating conditions. These factors have been chosen in such a way as to develop and disclose promptly any significant weaknesses during the temperature aging of an insulation system.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Test Procedure for Evaluation of Insulation Systems for Electronics Power Transformers"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121969 …}
    #channels: Doctrine\ORM\PersistentCollection {#121963 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#121967 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#121965 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121978 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121938
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#121980
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-26528400 {#121987
      date: 1969-02-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @347151600 {#121945
      date: 1981-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: DateTime @691887600 {#121979
      date: 1991-12-05 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "266"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#121976 …}
    -favorites: Doctrine\ORM\PersistentCollection {#121974 …}
  }
]

[
  "showFullLabel" => false
]

App\Twig\Components\ProductState {#122166
  +product: App\Entity\Product\Product {#121937
    #id: 8423
    #code: "IEEE00000450"
    #attributes: Doctrine\ORM\PersistentCollection {#121961 …}
    #variants: Doctrine\ORM\PersistentCollection {#121959 …}
    #options: Doctrine\ORM\PersistentCollection {#121954 …}
    #associations: Doctrine\ORM\PersistentCollection {#121956 …}
    #createdAt: DateTime @1751037404 {#121952
      date: 2025-06-27 17:16:44.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121986
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#121972 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#122162
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121937}
        #id: 28701
        #name: "IEEE 266:1969 (R1981)"
        #slug: "ieee-266-1969-r1981-ieee00000450-240075"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          The intent of this Test Procedure is to establish a uniform method by which the life of electronics transformer insulation systems can be compared. Thermal degradation is generally one of the major factors affecting the life of most insulating materials. It was chosen to be the major environmental factor in this Test Procedure. Other environmental factors, such as vibration, thermal shock, and moisture, have been included to simulate operating conditions. These factors have been chosen in such a way as to develop and disclose promptly any significant weaknesses during the temperature aging of an insulation system.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Test Procedure for Evaluation of Insulation Systems for Electronics Power Transformers"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121969 …}
    #channels: Doctrine\ORM\PersistentCollection {#121963 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#121967 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#121965 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121978 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121938
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#121980
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-26528400 {#121987
      date: 1969-02-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @347151600 {#121945
      date: 1981-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: DateTime @691887600 {#121979
      date: 1991-12-05 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "266"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#121976 …}
    -favorites: Doctrine\ORM\PersistentCollection {#121974 …}
  }
  +appearance: "state-withdrawn"
  +labels: [
    "Withdrawn"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#121937
    #id: 8423
    #code: "IEEE00000450"
    #attributes: Doctrine\ORM\PersistentCollection {#121961 …}
    #variants: Doctrine\ORM\PersistentCollection {#121959 …}
    #options: Doctrine\ORM\PersistentCollection {#121954 …}
    #associations: Doctrine\ORM\PersistentCollection {#121956 …}
    #createdAt: DateTime @1751037404 {#121952
      date: 2025-06-27 17:16:44.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121986
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#121972 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#122162
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121937}
        #id: 28701
        #name: "IEEE 266:1969 (R1981)"
        #slug: "ieee-266-1969-r1981-ieee00000450-240075"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          The intent of this Test Procedure is to establish a uniform method by which the life of electronics transformer insulation systems can be compared. Thermal degradation is generally one of the major factors affecting the life of most insulating materials. It was chosen to be the major environmental factor in this Test Procedure. Other environmental factors, such as vibration, thermal shock, and moisture, have been included to simulate operating conditions. These factors have been chosen in such a way as to develop and disclose promptly any significant weaknesses during the temperature aging of an insulation system.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Test Procedure for Evaluation of Insulation Systems for Electronics Power Transformers"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121969 …}
    #channels: Doctrine\ORM\PersistentCollection {#121963 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#121967 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#121965 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121978 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121938
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#121980
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-26528400 {#121987
      date: 1969-02-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @347151600 {#121945
      date: 1981-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: DateTime @691887600 {#121979
      date: 1991-12-05 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "266"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#121976 …}
    -favorites: Doctrine\ORM\PersistentCollection {#121974 …}
  }
]

App\Twig\Components\ProductMostRecent {#122244
  +product: App\Entity\Product\Product {#121937
    #id: 8423
    #code: "IEEE00000450"
    #attributes: Doctrine\ORM\PersistentCollection {#121961 …}
    #variants: Doctrine\ORM\PersistentCollection {#121959 …}
    #options: Doctrine\ORM\PersistentCollection {#121954 …}
    #associations: Doctrine\ORM\PersistentCollection {#121956 …}
    #createdAt: DateTime @1751037404 {#121952
      date: 2025-06-27 17:16:44.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121986
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#121972 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#122162
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121937}
        #id: 28701
        #name: "IEEE 266:1969 (R1981)"
        #slug: "ieee-266-1969-r1981-ieee00000450-240075"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          The intent of this Test Procedure is to establish a uniform method by which the life of electronics transformer insulation systems can be compared. Thermal degradation is generally one of the major factors affecting the life of most insulating materials. It was chosen to be the major environmental factor in this Test Procedure. Other environmental factors, such as vibration, thermal shock, and moisture, have been included to simulate operating conditions. These factors have been chosen in such a way as to develop and disclose promptly any significant weaknesses during the temperature aging of an insulation system.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Test Procedure for Evaluation of Insulation Systems for Electronics Power Transformers"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121969 …}
    #channels: Doctrine\ORM\PersistentCollection {#121963 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#121967 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#121965 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121978 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121938
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#121980
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @-26528400 {#121987
      date: 1969-02-28 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @347151600 {#121945
      date: 1981-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: DateTime @691887600 {#121979
      date: 1991-12-05 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "266"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#121976 …}
    -favorites: Doctrine\ORM\PersistentCollection {#121974 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#121943
    #id: 8431
    #code: "IEEE00000461"
    #attributes: Doctrine\ORM\PersistentCollection {#122029 …}
    #variants: Doctrine\ORM\PersistentCollection {#122026 …}
    #options: Doctrine\ORM\PersistentCollection {#122023 …}
    #associations: Doctrine\ORM\PersistentCollection {#122024 …}
    #createdAt: DateTime @1751037410 {#121951
      date: 2025-06-27 17:16:50.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121950
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#122012 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#122361
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121943}
        #id: 28733
        #name: "IEEE 272:1970 (R1976)"
        #slug: "ieee-272-1970-r1976-ieee00000461-240083"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          This standard pertains to computer-type pulse transformers. These pulse transformers are characterized by their use of a square loop core material as defined below with normal operation into the saturation flux density regions and with typical operation using a specifically defined current input pulse. These transformers exploit the memory characteristic of square-loop core material that makes the output pulse dependent upon the immediate history of the core flux. This type of transformer is used in shift registers, memory across switches, memory readout circuits, transformer logic matrices, and other storage-type devices. It is not the purpose of this standard to include large-scale memories. Wherever numerical requirements are indicated, they may be considered as recommended values. Appendix I contains a core analysis, transformer equivalent circuit, and definitions of associated terms. Appendix II contains definitions pertaining mainly to characteristic testing of computer-type pulse transformers.<br />\n
          \t\t\t\t<br />\n
          The purpose of this Standard is to provide a common ground of understanding between computer system<br />\n
          engineers and pulse transformer design engineers.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121990 …}
    #channels: Doctrine\ORM\PersistentCollection {#122030 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#122036 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#122035 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121942 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121949
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#121948
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @12956400 {#121947
      date: 1970-05-31 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @189298800 {#121946
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: DateTime @669510000 {#121944
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "272"
    -bookCollection: ""
    -pageCount: 15
    -documents: Doctrine\ORM\PersistentCollection {#121935 …}
    -favorites: Doctrine\ORM\PersistentCollection {#122027 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "additionalClasses" => "product__teaser--with-grey-border"
  "hasStretchedLink" => true
  "hoverType" => "shadow"
  "linkLabel" => "See more"
]

App\Twig\Components\ProductCard {#122319
  +product: App\Entity\Product\Product {#121943
    #id: 8431
    #code: "IEEE00000461"
    #attributes: Doctrine\ORM\PersistentCollection {#122029 …}
    #variants: Doctrine\ORM\PersistentCollection {#122026 …}
    #options: Doctrine\ORM\PersistentCollection {#122023 …}
    #associations: Doctrine\ORM\PersistentCollection {#122024 …}
    #createdAt: DateTime @1751037410 {#121951
      date: 2025-06-27 17:16:50.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121950
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#122012 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#122361
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121943}
        #id: 28733
        #name: "IEEE 272:1970 (R1976)"
        #slug: "ieee-272-1970-r1976-ieee00000461-240083"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          This standard pertains to computer-type pulse transformers. These pulse transformers are characterized by their use of a square loop core material as defined below with normal operation into the saturation flux density regions and with typical operation using a specifically defined current input pulse. These transformers exploit the memory characteristic of square-loop core material that makes the output pulse dependent upon the immediate history of the core flux. This type of transformer is used in shift registers, memory across switches, memory readout circuits, transformer logic matrices, and other storage-type devices. It is not the purpose of this standard to include large-scale memories. Wherever numerical requirements are indicated, they may be considered as recommended values. Appendix I contains a core analysis, transformer equivalent circuit, and definitions of associated terms. Appendix II contains definitions pertaining mainly to characteristic testing of computer-type pulse transformers.<br />\n
          \t\t\t\t<br />\n
          The purpose of this Standard is to provide a common ground of understanding between computer system<br />\n
          engineers and pulse transformer design engineers.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121990 …}
    #channels: Doctrine\ORM\PersistentCollection {#122030 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#122036 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#122035 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121942 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121949
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#121948
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @12956400 {#121947
      date: 1970-05-31 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @189298800 {#121946
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: DateTime @669510000 {#121944
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "272"
    -bookCollection: ""
    -pageCount: 15
    -documents: Doctrine\ORM\PersistentCollection {#121935 …}
    -favorites: Doctrine\ORM\PersistentCollection {#122027 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "product__teaser--with-grey-border"
  +linkLabel: "See more"
  +imageFilter: "product_thumbnail_teaser"
  +hasStretchedLink: true
  +backgroundColor: "white"
  +hoverType: "shadow"
}

[
  "product" => App\Entity\Product\Product {#121943
    #id: 8431
    #code: "IEEE00000461"
    #attributes: Doctrine\ORM\PersistentCollection {#122029 …}
    #variants: Doctrine\ORM\PersistentCollection {#122026 …}
    #options: Doctrine\ORM\PersistentCollection {#122023 …}
    #associations: Doctrine\ORM\PersistentCollection {#122024 …}
    #createdAt: DateTime @1751037410 {#121951
      date: 2025-06-27 17:16:50.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121950
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#122012 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#122361
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121943}
        #id: 28733
        #name: "IEEE 272:1970 (R1976)"
        #slug: "ieee-272-1970-r1976-ieee00000461-240083"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          This standard pertains to computer-type pulse transformers. These pulse transformers are characterized by their use of a square loop core material as defined below with normal operation into the saturation flux density regions and with typical operation using a specifically defined current input pulse. These transformers exploit the memory characteristic of square-loop core material that makes the output pulse dependent upon the immediate history of the core flux. This type of transformer is used in shift registers, memory across switches, memory readout circuits, transformer logic matrices, and other storage-type devices. It is not the purpose of this standard to include large-scale memories. Wherever numerical requirements are indicated, they may be considered as recommended values. Appendix I contains a core analysis, transformer equivalent circuit, and definitions of associated terms. Appendix II contains definitions pertaining mainly to characteristic testing of computer-type pulse transformers.<br />\n
          \t\t\t\t<br />\n
          The purpose of this Standard is to provide a common ground of understanding between computer system<br />\n
          engineers and pulse transformer design engineers.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121990 …}
    #channels: Doctrine\ORM\PersistentCollection {#122030 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#122036 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#122035 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121942 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121949
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#121948
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @12956400 {#121947
      date: 1970-05-31 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @189298800 {#121946
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: DateTime @669510000 {#121944
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "272"
    -bookCollection: ""
    -pageCount: 15
    -documents: Doctrine\ORM\PersistentCollection {#121935 …}
    -favorites: Doctrine\ORM\PersistentCollection {#122027 …}
  }
]

[
  "showFullLabel" => false
]

App\Twig\Components\ProductState {#122368
  +product: App\Entity\Product\Product {#121943
    #id: 8431
    #code: "IEEE00000461"
    #attributes: Doctrine\ORM\PersistentCollection {#122029 …}
    #variants: Doctrine\ORM\PersistentCollection {#122026 …}
    #options: Doctrine\ORM\PersistentCollection {#122023 …}
    #associations: Doctrine\ORM\PersistentCollection {#122024 …}
    #createdAt: DateTime @1751037410 {#121951
      date: 2025-06-27 17:16:50.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121950
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#122012 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#122361
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121943}
        #id: 28733
        #name: "IEEE 272:1970 (R1976)"
        #slug: "ieee-272-1970-r1976-ieee00000461-240083"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          This standard pertains to computer-type pulse transformers. These pulse transformers are characterized by their use of a square loop core material as defined below with normal operation into the saturation flux density regions and with typical operation using a specifically defined current input pulse. These transformers exploit the memory characteristic of square-loop core material that makes the output pulse dependent upon the immediate history of the core flux. This type of transformer is used in shift registers, memory across switches, memory readout circuits, transformer logic matrices, and other storage-type devices. It is not the purpose of this standard to include large-scale memories. Wherever numerical requirements are indicated, they may be considered as recommended values. Appendix I contains a core analysis, transformer equivalent circuit, and definitions of associated terms. Appendix II contains definitions pertaining mainly to characteristic testing of computer-type pulse transformers.<br />\n
          \t\t\t\t<br />\n
          The purpose of this Standard is to provide a common ground of understanding between computer system<br />\n
          engineers and pulse transformer design engineers.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121990 …}
    #channels: Doctrine\ORM\PersistentCollection {#122030 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#122036 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#122035 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121942 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121949
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#121948
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @12956400 {#121947
      date: 1970-05-31 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @189298800 {#121946
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: DateTime @669510000 {#121944
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "272"
    -bookCollection: ""
    -pageCount: 15
    -documents: Doctrine\ORM\PersistentCollection {#121935 …}
    -favorites: Doctrine\ORM\PersistentCollection {#122027 …}
  }
  +appearance: "state-withdrawn"
  +labels: [
    "Withdrawn"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#121943
    #id: 8431
    #code: "IEEE00000461"
    #attributes: Doctrine\ORM\PersistentCollection {#122029 …}
    #variants: Doctrine\ORM\PersistentCollection {#122026 …}
    #options: Doctrine\ORM\PersistentCollection {#122023 …}
    #associations: Doctrine\ORM\PersistentCollection {#122024 …}
    #createdAt: DateTime @1751037410 {#121951
      date: 2025-06-27 17:16:50.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121950
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#122012 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#122361
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121943}
        #id: 28733
        #name: "IEEE 272:1970 (R1976)"
        #slug: "ieee-272-1970-r1976-ieee00000461-240083"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          This standard pertains to computer-type pulse transformers. These pulse transformers are characterized by their use of a square loop core material as defined below with normal operation into the saturation flux density regions and with typical operation using a specifically defined current input pulse. These transformers exploit the memory characteristic of square-loop core material that makes the output pulse dependent upon the immediate history of the core flux. This type of transformer is used in shift registers, memory across switches, memory readout circuits, transformer logic matrices, and other storage-type devices. It is not the purpose of this standard to include large-scale memories. Wherever numerical requirements are indicated, they may be considered as recommended values. Appendix I contains a core analysis, transformer equivalent circuit, and definitions of associated terms. Appendix II contains definitions pertaining mainly to characteristic testing of computer-type pulse transformers.<br />\n
          \t\t\t\t<br />\n
          The purpose of this Standard is to provide a common ground of understanding between computer system<br />\n
          engineers and pulse transformer design engineers.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121990 …}
    #channels: Doctrine\ORM\PersistentCollection {#122030 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#122036 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#122035 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121942 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121949
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#121948
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @12956400 {#121947
      date: 1970-05-31 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @189298800 {#121946
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: DateTime @669510000 {#121944
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "272"
    -bookCollection: ""
    -pageCount: 15
    -documents: Doctrine\ORM\PersistentCollection {#121935 …}
    -favorites: Doctrine\ORM\PersistentCollection {#122027 …}
  }
]

App\Twig\Components\ProductMostRecent {#122445
  +product: App\Entity\Product\Product {#121943
    #id: 8431
    #code: "IEEE00000461"
    #attributes: Doctrine\ORM\PersistentCollection {#122029 …}
    #variants: Doctrine\ORM\PersistentCollection {#122026 …}
    #options: Doctrine\ORM\PersistentCollection {#122023 …}
    #associations: Doctrine\ORM\PersistentCollection {#122024 …}
    #createdAt: DateTime @1751037410 {#121951
      date: 2025-06-27 17:16:50.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754606304 {#121950
      date: 2025-08-08 00:38:24.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#122012 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#122361
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#121943}
        #id: 28733
        #name: "IEEE 272:1970 (R1976)"
        #slug: "ieee-272-1970-r1976-ieee00000461-240083"
        #description: """
          New IEEE Standard - Inactive-Withdrawn.<br />\n
          This standard pertains to computer-type pulse transformers. These pulse transformers are characterized by their use of a square loop core material as defined below with normal operation into the saturation flux density regions and with typical operation using a specifically defined current input pulse. These transformers exploit the memory characteristic of square-loop core material that makes the output pulse dependent upon the immediate history of the core flux. This type of transformer is used in shift registers, memory across switches, memory readout circuits, transformer logic matrices, and other storage-type devices. It is not the purpose of this standard to include large-scale memories. Wherever numerical requirements are indicated, they may be considered as recommended values. Appendix I contains a core analysis, transformer equivalent circuit, and definitions of associated terms. Appendix II contains definitions pertaining mainly to characteristic testing of computer-type pulse transformers.<br />\n
          \t\t\t\t<br />\n
          The purpose of this Standard is to provide a common ground of understanding between computer system<br />\n
          engineers and pulse transformer design engineers.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Computer-Type (Square-Loop) Pulse Transformers"
        -notes: "Inactive-Withdrawn"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#121990 …}
    #channels: Doctrine\ORM\PersistentCollection {#122030 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7308 …}
    #reviews: Doctrine\ORM\PersistentCollection {#122036 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#122035 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7422 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#121942 …}
    -apiLastModifiedAt: DateTime @1754517600 {#121949
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#121948
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @12956400 {#121947
      date: 1970-05-31 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @189298800 {#121946
      date: 1976-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -canceledAt: DateTime @669510000 {#121944
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "272"
    -bookCollection: ""
    -pageCount: 15
    -documents: Doctrine\ORM\PersistentCollection {#121935 …}
    -favorites: Doctrine\ORM\PersistentCollection {#122027 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}