Symfony Profiler

[
  "product" => App\Entity\Product\Product {#7310
    #id: 9195
    #code: "IEEE00001830"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038051 {#7274
      date: 2025-06-27 17:27:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 31789
        #name: "IEEE 1210:1996"
        #slug: "ieee-1210-1996-ieee00001830-240847"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Superseded by 1210-2004 Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the tension on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable lubricants are used to lower the tension on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system which they contact.<br />\n
          This document will describe standard criteria for testing the interaction of cable pulling compounds (lubricants) with electrical cable jacket or other cable exterior covering. These tests and criteria will be used to determine if the compound is acceptable for use on specific cable types.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @840664800 {#7318
      date: 1996-08-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#93007
  +product: App\Entity\Product\Product {#7310
    #id: 9195
    #code: "IEEE00001830"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038051 {#7274
      date: 2025-06-27 17:27:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 31789
        #name: "IEEE 1210:1996"
        #slug: "ieee-1210-1996-ieee00001830-240847"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Superseded by 1210-2004 Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the tension on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable lubricants are used to lower the tension on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system which they contact.<br />\n
          This document will describe standard criteria for testing the interaction of cable pulling compounds (lubricants) with electrical cable jacket or other cable exterior covering. These tests and criteria will be used to determine if the compound is acceptable for use on specific cable types.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @840664800 {#7318
      date: 1996-08-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 9195
    #code: "IEEE00001830"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038051 {#7274
      date: 2025-06-27 17:27:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 31789
        #name: "IEEE 1210:1996"
        #slug: "ieee-1210-1996-ieee00001830-240847"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Superseded by 1210-2004 Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the tension on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable lubricants are used to lower the tension on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system which they contact.<br />\n
          This document will describe standard criteria for testing the interaction of cable pulling compounds (lubricants) with electrical cable jacket or other cable exterior covering. These tests and criteria will be used to determine if the compound is acceptable for use on specific cable types.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @840664800 {#7318
      date: 1996-08-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]

App\Twig\Components\ProductType {#93187
  +product: App\Entity\Product\Product {#7310
    #id: 9195
    #code: "IEEE00001830"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038051 {#7274
      date: 2025-06-27 17:27:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 31789
        #name: "IEEE 1210:1996"
        #slug: "ieee-1210-1996-ieee00001830-240847"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Superseded by 1210-2004 Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the tension on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable lubricants are used to lower the tension on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system which they contact.<br />\n
          This document will describe standard criteria for testing the interaction of cable pulling compounds (lubricants) with electrical cable jacket or other cable exterior covering. These tests and criteria will be used to determine if the compound is acceptable for use on specific cable types.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @840664800 {#7318
      date: 1996-08-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Standard"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 9195
    #code: "IEEE00001830"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038051 {#7274
      date: 2025-06-27 17:27:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 31789
        #name: "IEEE 1210:1996"
        #slug: "ieee-1210-1996-ieee00001830-240847"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Superseded by 1210-2004 Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the tension on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable lubricants are used to lower the tension on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system which they contact.<br />\n
          This document will describe standard criteria for testing the interaction of cable pulling compounds (lubricants) with electrical cable jacket or other cable exterior covering. These tests and criteria will be used to determine if the compound is acceptable for use on specific cable types.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @840664800 {#7318
      date: 1996-08-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]

App\Twig\Components\ProductMostRecent {#93262
  +product: App\Entity\Product\Product {#7310
    #id: 9195
    #code: "IEEE00001830"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038051 {#7274
      date: 2025-06-27 17:27:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 31789
        #name: "IEEE 1210:1996"
        #slug: "ieee-1210-1996-ieee00001830-240847"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Superseded by 1210-2004 Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the tension on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable lubricants are used to lower the tension on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system which they contact.<br />\n
          This document will describe standard criteria for testing the interaction of cable pulling compounds (lubricants) with electrical cable jacket or other cable exterior covering. These tests and criteria will be used to determine if the compound is acceptable for use on specific cable types.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @840664800 {#7318
      date: 1996-08-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#93671
    #id: 12036
    #code: "IEEE00006976"
    #attributes: Doctrine\ORM\PersistentCollection {#93653 …}
    #variants: Doctrine\ORM\PersistentCollection {#93650 …}
    #options: Doctrine\ORM\PersistentCollection {#93646 …}
    #associations: Doctrine\ORM\PersistentCollection {#93648 …}
    #createdAt: DateTime @1751040153 {#93679
      date: 2025-06-27 18:02:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93658
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93664 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93699
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93671}
        #id: 43153
        #name: "IEEE P1210"
        #slug: "ieee-p1210-ieee00006976-243688"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored 3 holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable-pulling lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable-pulling lubricants are used to lower the friction on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable-pulling lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system that they contact. Compatibility of cable-pulling lubricants with cable coverings is the only subject of this standard. Other important performance criteria for cable-pulling lubricants, such as friction reduction, toxicity, combustibility, and so on, are not discussed. This standard uses accepted cable performance standards whenever possible. Relevant standards are cited in the text and listed in Clause 2 and Annex A.<br />\n
          This standard describes tests for determining the compatibility of cable-pulling lubricants with cable jacket or other exterior cable coverings. Compatibility of cable-pulling lubricants with a variety of common cable coverings is considered. Often, testing is confined to the effect of the lubricant on the physical properties of the jacket. When the electrical properties, such as dielectric withstand voltage or electrical resistivity, are important, the evaluation also includes these properties.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93662 …}
    #channels: Doctrine\ORM\PersistentCollection {#93655 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93660 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93657 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93672 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93642
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1728856800 {#93678
      date: 2024-10-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1735081200 {#93677
      date: 2024-12-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 25
    -documents: Doctrine\ORM\PersistentCollection {#93668 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93666 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#106891
  +product: App\Entity\Product\Product {#93671
    #id: 12036
    #code: "IEEE00006976"
    #attributes: Doctrine\ORM\PersistentCollection {#93653 …}
    #variants: Doctrine\ORM\PersistentCollection {#93650 …}
    #options: Doctrine\ORM\PersistentCollection {#93646 …}
    #associations: Doctrine\ORM\PersistentCollection {#93648 …}
    #createdAt: DateTime @1751040153 {#93679
      date: 2025-06-27 18:02:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93658
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93664 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93699
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93671}
        #id: 43153
        #name: "IEEE P1210"
        #slug: "ieee-p1210-ieee00006976-243688"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored 3 holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable-pulling lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable-pulling lubricants are used to lower the friction on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable-pulling lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system that they contact. Compatibility of cable-pulling lubricants with cable coverings is the only subject of this standard. Other important performance criteria for cable-pulling lubricants, such as friction reduction, toxicity, combustibility, and so on, are not discussed. This standard uses accepted cable performance standards whenever possible. Relevant standards are cited in the text and listed in Clause 2 and Annex A.<br />\n
          This standard describes tests for determining the compatibility of cable-pulling lubricants with cable jacket or other exterior cable coverings. Compatibility of cable-pulling lubricants with a variety of common cable coverings is considered. Often, testing is confined to the effect of the lubricant on the physical properties of the jacket. When the electrical properties, such as dielectric withstand voltage or electrical resistivity, are important, the evaluation also includes these properties.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93662 …}
    #channels: Doctrine\ORM\PersistentCollection {#93655 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93660 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93657 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93672 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93642
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1728856800 {#93678
      date: 2024-10-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1735081200 {#93677
      date: 2024-12-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 25
    -documents: Doctrine\ORM\PersistentCollection {#93668 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93666 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#93671
    #id: 12036
    #code: "IEEE00006976"
    #attributes: Doctrine\ORM\PersistentCollection {#93653 …}
    #variants: Doctrine\ORM\PersistentCollection {#93650 …}
    #options: Doctrine\ORM\PersistentCollection {#93646 …}
    #associations: Doctrine\ORM\PersistentCollection {#93648 …}
    #createdAt: DateTime @1751040153 {#93679
      date: 2025-06-27 18:02:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93658
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93664 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93699
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93671}
        #id: 43153
        #name: "IEEE P1210"
        #slug: "ieee-p1210-ieee00006976-243688"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored 3 holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable-pulling lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable-pulling lubricants are used to lower the friction on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable-pulling lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system that they contact. Compatibility of cable-pulling lubricants with cable coverings is the only subject of this standard. Other important performance criteria for cable-pulling lubricants, such as friction reduction, toxicity, combustibility, and so on, are not discussed. This standard uses accepted cable performance standards whenever possible. Relevant standards are cited in the text and listed in Clause 2 and Annex A.<br />\n
          This standard describes tests for determining the compatibility of cable-pulling lubricants with cable jacket or other exterior cable coverings. Compatibility of cable-pulling lubricants with a variety of common cable coverings is considered. Often, testing is confined to the effect of the lubricant on the physical properties of the jacket. When the electrical properties, such as dielectric withstand voltage or electrical resistivity, are important, the evaluation also includes these properties.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93662 …}
    #channels: Doctrine\ORM\PersistentCollection {#93655 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93660 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93657 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93672 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93642
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1728856800 {#93678
      date: 2024-10-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1735081200 {#93677
      date: 2024-12-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 25
    -documents: Doctrine\ORM\PersistentCollection {#93668 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93666 …}
  }
]

App\Twig\Components\ProductMostRecent {#106958
  +product: App\Entity\Product\Product {#93671
    #id: 12036
    #code: "IEEE00006976"
    #attributes: Doctrine\ORM\PersistentCollection {#93653 …}
    #variants: Doctrine\ORM\PersistentCollection {#93650 …}
    #options: Doctrine\ORM\PersistentCollection {#93646 …}
    #associations: Doctrine\ORM\PersistentCollection {#93648 …}
    #createdAt: DateTime @1751040153 {#93679
      date: 2025-06-27 18:02:33.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93658
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93664 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93699
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93671}
        #id: 43153
        #name: "IEEE P1210"
        #slug: "ieee-p1210-ieee00006976-243688"
        #description: """
          Revision Standard - Active - Draft.<br />\n
          Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored 3 holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable-pulling lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable-pulling lubricants are used to lower the friction on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable-pulling lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system that they contact. Compatibility of cable-pulling lubricants with cable coverings is the only subject of this standard. Other important performance criteria for cable-pulling lubricants, such as friction reduction, toxicity, combustibility, and so on, are not discussed. This standard uses accepted cable performance standards whenever possible. Relevant standards are cited in the text and listed in Clause 2 and Annex A.<br />\n
          This standard describes tests for determining the compatibility of cable-pulling lubricants with cable jacket or other exterior cable coverings. Compatibility of cable-pulling lubricants with a variety of common cable coverings is considered. Often, testing is confined to the effect of the lubricant on the physical properties of the jacket. When the electrical properties, such as dielectric withstand voltage or electrical resistivity, are important, the evaluation also includes these properties.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Draft Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93662 …}
    #channels: Doctrine\ORM\PersistentCollection {#93655 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93660 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93657 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93672 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93642
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1728856800 {#93678
      date: 2024-10-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1735081200 {#93677
      date: 2024-12-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 25
    -documents: Doctrine\ORM\PersistentCollection {#93668 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93666 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106800
    #id: 11108
    #code: "IEEE00005585"
    #attributes: Doctrine\ORM\PersistentCollection {#106781 …}
    #variants: Doctrine\ORM\PersistentCollection {#106778 …}
    #options: Doctrine\ORM\PersistentCollection {#106774 …}
    #associations: Doctrine\ORM\PersistentCollection {#106776 …}
    #createdAt: DateTime @1751039483 {#106767
      date: 2025-06-27 17:51:23.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#106780
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106791 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107025
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106800}
        #id: 39441
        #name: "IEEE 1210-2004/Cor 1:2014"
        #slug: "ieee-1210-2004-cor-1-2014-ieee00005585-242760"
        #description: """
          Corrigendum Standard - Inactive-Reserved.<br />\n
          Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          This Corrigendum is to replace equations in 4.3 and 5.3 and to correct the legend in Table 4 in 4.5.<br />\n
          \t\t\t\t<br />\n
          Correct the error in the Equation 1. Correct error in denominator of Equation 3. Correct misspelling in Table 4 Legend. Correct subscript for word &quot;rho&quot; in Note.<br />\n
          The purpose of this project is to revise IEEE Std 1210-1996. Evaluation of pulling lubricants had been done on a non-standard basis. Standardization helps cable users as well as manufacturers by providing accepted evaluation methods and critrea. This revision will update to include newer cable jacket materials in ICEA/NEMA specifications.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable - Corrigendum 1"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106789 …}
    #channels: Doctrine\ORM\PersistentCollection {#106783 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106787 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106785 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106798 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106807
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1618783200 {#106811
      date: 2021-04-19 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1396562400 {#106765
      date: 2014-04-04 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#106799
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#106796 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106794 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107040
  +product: App\Entity\Product\Product {#106800
    #id: 11108
    #code: "IEEE00005585"
    #attributes: Doctrine\ORM\PersistentCollection {#106781 …}
    #variants: Doctrine\ORM\PersistentCollection {#106778 …}
    #options: Doctrine\ORM\PersistentCollection {#106774 …}
    #associations: Doctrine\ORM\PersistentCollection {#106776 …}
    #createdAt: DateTime @1751039483 {#106767
      date: 2025-06-27 17:51:23.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#106780
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106791 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107025
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106800}
        #id: 39441
        #name: "IEEE 1210-2004/Cor 1:2014"
        #slug: "ieee-1210-2004-cor-1-2014-ieee00005585-242760"
        #description: """
          Corrigendum Standard - Inactive-Reserved.<br />\n
          Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          This Corrigendum is to replace equations in 4.3 and 5.3 and to correct the legend in Table 4 in 4.5.<br />\n
          \t\t\t\t<br />\n
          Correct the error in the Equation 1. Correct error in denominator of Equation 3. Correct misspelling in Table 4 Legend. Correct subscript for word &quot;rho&quot; in Note.<br />\n
          The purpose of this project is to revise IEEE Std 1210-1996. Evaluation of pulling lubricants had been done on a non-standard basis. Standardization helps cable users as well as manufacturers by providing accepted evaluation methods and critrea. This revision will update to include newer cable jacket materials in ICEA/NEMA specifications.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable - Corrigendum 1"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106789 …}
    #channels: Doctrine\ORM\PersistentCollection {#106783 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106787 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106785 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106798 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106807
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1618783200 {#106811
      date: 2021-04-19 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1396562400 {#106765
      date: 2014-04-04 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#106799
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#106796 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106794 …}
  }
  +appearance: "state-withdrawn"
  +labels: [
    "Withdrawn"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106800
    #id: 11108
    #code: "IEEE00005585"
    #attributes: Doctrine\ORM\PersistentCollection {#106781 …}
    #variants: Doctrine\ORM\PersistentCollection {#106778 …}
    #options: Doctrine\ORM\PersistentCollection {#106774 …}
    #associations: Doctrine\ORM\PersistentCollection {#106776 …}
    #createdAt: DateTime @1751039483 {#106767
      date: 2025-06-27 17:51:23.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#106780
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106791 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107025
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106800}
        #id: 39441
        #name: "IEEE 1210-2004/Cor 1:2014"
        #slug: "ieee-1210-2004-cor-1-2014-ieee00005585-242760"
        #description: """
          Corrigendum Standard - Inactive-Reserved.<br />\n
          Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          This Corrigendum is to replace equations in 4.3 and 5.3 and to correct the legend in Table 4 in 4.5.<br />\n
          \t\t\t\t<br />\n
          Correct the error in the Equation 1. Correct error in denominator of Equation 3. Correct misspelling in Table 4 Legend. Correct subscript for word &quot;rho&quot; in Note.<br />\n
          The purpose of this project is to revise IEEE Std 1210-1996. Evaluation of pulling lubricants had been done on a non-standard basis. Standardization helps cable users as well as manufacturers by providing accepted evaluation methods and critrea. This revision will update to include newer cable jacket materials in ICEA/NEMA specifications.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable - Corrigendum 1"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106789 …}
    #channels: Doctrine\ORM\PersistentCollection {#106783 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106787 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106785 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106798 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106807
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1618783200 {#106811
      date: 2021-04-19 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1396562400 {#106765
      date: 2014-04-04 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#106799
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#106796 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106794 …}
  }
]

App\Twig\Components\ProductMostRecent {#107092
  +product: App\Entity\Product\Product {#106800
    #id: 11108
    #code: "IEEE00005585"
    #attributes: Doctrine\ORM\PersistentCollection {#106781 …}
    #variants: Doctrine\ORM\PersistentCollection {#106778 …}
    #options: Doctrine\ORM\PersistentCollection {#106774 …}
    #associations: Doctrine\ORM\PersistentCollection {#106776 …}
    #createdAt: DateTime @1751039483 {#106767
      date: 2025-06-27 17:51:23.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608190 {#106780
      date: 2025-08-08 01:09:50.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106791 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107025
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106800}
        #id: 39441
        #name: "IEEE 1210-2004/Cor 1:2014"
        #slug: "ieee-1210-2004-cor-1-2014-ieee00005585-242760"
        #description: """
          Corrigendum Standard - Inactive-Reserved.<br />\n
          Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          This Corrigendum is to replace equations in 4.3 and 5.3 and to correct the legend in Table 4 in 4.5.<br />\n
          \t\t\t\t<br />\n
          Correct the error in the Equation 1. Correct error in denominator of Equation 3. Correct misspelling in Table 4 Legend. Correct subscript for word &quot;rho&quot; in Note.<br />\n
          The purpose of this project is to revise IEEE Std 1210-1996. Evaluation of pulling lubricants had been done on a non-standard basis. Standardization helps cable users as well as manufacturers by providing accepted evaluation methods and critrea. This revision will update to include newer cable jacket materials in ICEA/NEMA specifications.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable - Corrigendum 1"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106789 …}
    #channels: Doctrine\ORM\PersistentCollection {#106783 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106787 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106785 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106798 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106807
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1618783200 {#106811
      date: 2021-04-19 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1396562400 {#106765
      date: 2014-04-04 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#106799
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 14
    -documents: Doctrine\ORM\PersistentCollection {#106796 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106794 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106838
    #id: 10023
    #code: "IEEE00003467"
    #attributes: Doctrine\ORM\PersistentCollection {#106826 …}
    #variants: Doctrine\ORM\PersistentCollection {#106832 …}
    #options: Doctrine\ORM\PersistentCollection {#106825 …}
    #associations: Doctrine\ORM\PersistentCollection {#106831 …}
    #createdAt: DateTime @1751038754 {#106771
      date: 2025-06-27 17:39:14.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#106770
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106844 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107162
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106838}
        #id: 35101
        #name: "IEEE 1210:2004"
        #slug: "ieee-1210-2004-ieee00003467-241675"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered. (An interpretation is available at http://standards.ieee.org/findstds/interps/1210-2004.html)<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable-pulling lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable-pulling lubricants are used to lower the friction on cables when they<br />\n
          are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cablepulling lubricants should be compatible with the cable. They should not interfere with the function of any<br />\n
          component of the cable system that they contact.<br />\n
          Compatibility of cable-pulling lubricants with cable coverings is the only subject of this standard. Other important performance criteria for cable-pulling lubricants, such as friction reduction, toxicity, combustibility, and so on, are not discussed. This standard uses accepted cable performance standards whenever possible. Relevant standards are cited in the text and listed in Clause 2 and Annex A.<br />\n
          This standard describes tests for determining the compatibility of cable-pulling lubricants with cable jacket or other exterior cable coverings. Compatibility of cable-pulling lubricants with a variety of common cable coverings is considered.Often, testing is confined to the effect of the lubricant on the physical properties of the jacket. When the electrical properties, such as dielectric withstand voltage or electrical resistivity, are important, the evaluation also includes these properties.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106835 …}
    #channels: Doctrine\ORM\PersistentCollection {#106834 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106841 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106840 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106829 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106769
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1618783200 {#106763
      date: 2021-04-19 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1111532400 {#106768
      date: 2005-03-23 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#106842
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 13
    -documents: Doctrine\ORM\PersistentCollection {#106810 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106849 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107177
  +product: App\Entity\Product\Product {#106838
    #id: 10023
    #code: "IEEE00003467"
    #attributes: Doctrine\ORM\PersistentCollection {#106826 …}
    #variants: Doctrine\ORM\PersistentCollection {#106832 …}
    #options: Doctrine\ORM\PersistentCollection {#106825 …}
    #associations: Doctrine\ORM\PersistentCollection {#106831 …}
    #createdAt: DateTime @1751038754 {#106771
      date: 2025-06-27 17:39:14.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#106770
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106844 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107162
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106838}
        #id: 35101
        #name: "IEEE 1210:2004"
        #slug: "ieee-1210-2004-ieee00003467-241675"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered. (An interpretation is available at http://standards.ieee.org/findstds/interps/1210-2004.html)<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable-pulling lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable-pulling lubricants are used to lower the friction on cables when they<br />\n
          are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cablepulling lubricants should be compatible with the cable. They should not interfere with the function of any<br />\n
          component of the cable system that they contact.<br />\n
          Compatibility of cable-pulling lubricants with cable coverings is the only subject of this standard. Other important performance criteria for cable-pulling lubricants, such as friction reduction, toxicity, combustibility, and so on, are not discussed. This standard uses accepted cable performance standards whenever possible. Relevant standards are cited in the text and listed in Clause 2 and Annex A.<br />\n
          This standard describes tests for determining the compatibility of cable-pulling lubricants with cable jacket or other exterior cable coverings. Compatibility of cable-pulling lubricants with a variety of common cable coverings is considered.Often, testing is confined to the effect of the lubricant on the physical properties of the jacket. When the electrical properties, such as dielectric withstand voltage or electrical resistivity, are important, the evaluation also includes these properties.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106835 …}
    #channels: Doctrine\ORM\PersistentCollection {#106834 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106841 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106840 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106829 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106769
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1618783200 {#106763
      date: 2021-04-19 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1111532400 {#106768
      date: 2005-03-23 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#106842
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 13
    -documents: Doctrine\ORM\PersistentCollection {#106810 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106849 …}
  }
  +appearance: "state-withdrawn"
  +labels: [
    "Withdrawn"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106838
    #id: 10023
    #code: "IEEE00003467"
    #attributes: Doctrine\ORM\PersistentCollection {#106826 …}
    #variants: Doctrine\ORM\PersistentCollection {#106832 …}
    #options: Doctrine\ORM\PersistentCollection {#106825 …}
    #associations: Doctrine\ORM\PersistentCollection {#106831 …}
    #createdAt: DateTime @1751038754 {#106771
      date: 2025-06-27 17:39:14.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#106770
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106844 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107162
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106838}
        #id: 35101
        #name: "IEEE 1210:2004"
        #slug: "ieee-1210-2004-ieee00003467-241675"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered. (An interpretation is available at http://standards.ieee.org/findstds/interps/1210-2004.html)<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable-pulling lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable-pulling lubricants are used to lower the friction on cables when they<br />\n
          are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cablepulling lubricants should be compatible with the cable. They should not interfere with the function of any<br />\n
          component of the cable system that they contact.<br />\n
          Compatibility of cable-pulling lubricants with cable coverings is the only subject of this standard. Other important performance criteria for cable-pulling lubricants, such as friction reduction, toxicity, combustibility, and so on, are not discussed. This standard uses accepted cable performance standards whenever possible. Relevant standards are cited in the text and listed in Clause 2 and Annex A.<br />\n
          This standard describes tests for determining the compatibility of cable-pulling lubricants with cable jacket or other exterior cable coverings. Compatibility of cable-pulling lubricants with a variety of common cable coverings is considered.Often, testing is confined to the effect of the lubricant on the physical properties of the jacket. When the electrical properties, such as dielectric withstand voltage or electrical resistivity, are important, the evaluation also includes these properties.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106835 …}
    #channels: Doctrine\ORM\PersistentCollection {#106834 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106841 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106840 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106829 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106769
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1618783200 {#106763
      date: 2021-04-19 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1111532400 {#106768
      date: 2005-03-23 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#106842
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 13
    -documents: Doctrine\ORM\PersistentCollection {#106810 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106849 …}
  }
]

App\Twig\Components\ProductMostRecent {#107228
  +product: App\Entity\Product\Product {#106838
    #id: 10023
    #code: "IEEE00003467"
    #attributes: Doctrine\ORM\PersistentCollection {#106826 …}
    #variants: Doctrine\ORM\PersistentCollection {#106832 …}
    #options: Doctrine\ORM\PersistentCollection {#106825 …}
    #associations: Doctrine\ORM\PersistentCollection {#106831 …}
    #createdAt: DateTime @1751038754 {#106771
      date: 2025-06-27 17:39:14.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#106770
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106844 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107162
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106838}
        #id: 35101
        #name: "IEEE 1210:2004"
        #slug: "ieee-1210-2004-ieee00003467-241675"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable pulling lubricants are used to lower the friction on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered. (An interpretation is available at http://standards.ieee.org/findstds/interps/1210-2004.html)<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable-pulling lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable-pulling lubricants are used to lower the friction on cables when they<br />\n
          are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cablepulling lubricants should be compatible with the cable. They should not interfere with the function of any<br />\n
          component of the cable system that they contact.<br />\n
          Compatibility of cable-pulling lubricants with cable coverings is the only subject of this standard. Other important performance criteria for cable-pulling lubricants, such as friction reduction, toxicity, combustibility, and so on, are not discussed. This standard uses accepted cable performance standards whenever possible. Relevant standards are cited in the text and listed in Clause 2 and Annex A.<br />\n
          This standard describes tests for determining the compatibility of cable-pulling lubricants with cable jacket or other exterior cable coverings. Compatibility of cable-pulling lubricants with a variety of common cable coverings is considered.Often, testing is confined to the effect of the lubricant on the physical properties of the jacket. When the electrical properties, such as dielectric withstand voltage or electrical resistivity, are important, the evaluation also includes these properties.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106835 …}
    #channels: Doctrine\ORM\PersistentCollection {#106834 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106841 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106840 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106829 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106769
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1618783200 {#106763
      date: 2021-04-19 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1111532400 {#106768
      date: 2005-03-23 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1616626800 {#106842
      date: 2021-03-25 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 13
    -documents: Doctrine\ORM\PersistentCollection {#106810 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106849 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 9195
    #code: "IEEE00001830"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038051 {#7274
      date: 2025-06-27 17:27:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 31789
        #name: "IEEE 1210:1996"
        #slug: "ieee-1210-1996-ieee00001830-240847"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Superseded by 1210-2004 Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the tension on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable lubricants are used to lower the tension on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system which they contact.<br />\n
          This document will describe standard criteria for testing the interaction of cable pulling compounds (lubricants) with electrical cable jacket or other cable exterior covering. These tests and criteria will be used to determine if the compound is acceptable for use on specific cable types.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @840664800 {#7318
      date: 1996-08-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107292
  +product: App\Entity\Product\Product {#7310
    #id: 9195
    #code: "IEEE00001830"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038051 {#7274
      date: 2025-06-27 17:27:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 31789
        #name: "IEEE 1210:1996"
        #slug: "ieee-1210-1996-ieee00001830-240847"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Superseded by 1210-2004 Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the tension on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable lubricants are used to lower the tension on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system which they contact.<br />\n
          This document will describe standard criteria for testing the interaction of cable pulling compounds (lubricants) with electrical cable jacket or other cable exterior covering. These tests and criteria will be used to determine if the compound is acceptable for use on specific cable types.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @840664800 {#7318
      date: 1996-08-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 9195
    #code: "IEEE00001830"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038051 {#7274
      date: 2025-06-27 17:27:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 31789
        #name: "IEEE 1210:1996"
        #slug: "ieee-1210-1996-ieee00001830-240847"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Superseded by 1210-2004 Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the tension on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable lubricants are used to lower the tension on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system which they contact.<br />\n
          This document will describe standard criteria for testing the interaction of cable pulling compounds (lubricants) with electrical cable jacket or other cable exterior covering. These tests and criteria will be used to determine if the compound is acceptable for use on specific cable types.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @840664800 {#7318
      date: 1996-08-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]

App\Twig\Components\ProductMostRecent {#107319
  +product: App\Entity\Product\Product {#7310
    #id: 9195
    #code: "IEEE00001830"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038051 {#7274
      date: 2025-06-27 17:27:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 31789
        #name: "IEEE 1210:1996"
        #slug: "ieee-1210-1996-ieee00001830-240847"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Superseded by 1210-2004 Criteria and test methods for determining the compatibility of cable-pulling lubricants (compounds) with cable jacket or other exterior cable covering are described in this standard. Cable-pulling lubricants are used to lower the tension on cable as it is pulled into conduit, duct, or directionally bored holes. Compatibility is important because lubricants should not negatively interact with the cables they lubricate. Compatibility of lubricants with a variety of common cable coverings is considered.<br />\n
          \t\t\t\t<br />\n
          This standard applies to cable lubricants (compounds) and the testing and analysis of their interaction with wire and cable. Cable lubricants are used to lower the tension on cables when they are installed (pulled) into conduits, ducts, or directionally bored holes. These lubricants and/or their residues are in direct contact with the cable exterior covering and may remain so for the life of the cable. Cable lubricants should be compatible with the cable. They should not interfere with the function of any component of the cable system which they contact.<br />\n
          This document will describe standard criteria for testing the interaction of cable pulling compounds (lubricants) with electrical cable jacket or other cable exterior covering. These tests and criteria will be used to determine if the compound is acceptable for use on specific cable types.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @840664800 {#7318
      date: 1996-08-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "1210"
    -bookCollection: ""
    -pageCount: 20
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}