GET https://dev.normadoc.fr/products/ieee-c62-48-1995-r2000-ieee00002869-241416

Response
200 OK
IP
216.73.216.9
Profiled on
Token
3ed481

Components

4 Twig Components
10 Render Count
10 ms Render Time
158.0 MiB Memory Usage

Components

Name Metadata Render Count Render Time
ProductState 
"App\Twig\Components\ProductState"
components/ProductState.html.twig 		4 0.95ms
ProductMostRecent 
"App\Twig\Components\ProductMostRecent"
components/ProductMostRecent.html.twig 		4 2.89ms
ProductType 
"App\Twig\Components\ProductType"
components/ProductType.html.twig 		1 0.23ms
ProductCard 
"App\Twig\Components\ProductCard"
components/ProductCard.html.twig 		1 6.60ms

Render calls

ProductState App\Twig\Components\ProductState 158.0 MiB 0.38 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7311
    #id: 9764
    #code: "IEEE00002869"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038537 {#7274
      date: 2025-06-27 17:35:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34065
        #name: "IEEE C62.48:1995 (R2000)"
        #slug: "ieee-c62-48-1995-r2000-ieee00002869-241416"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Information is provided to users and manufacturers of surge-protective devices(SPDs) about the interactions that may occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V rms. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100–1000 V rms.<br />\n
          This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          This guide will discuss both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide.<br />\n
          An SPD is a device whose primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies, ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or may affect SPDs. The description of the interactions is intended to educate the potential user of such SPDs as to what he or she can expect from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @818982000 {#7318
      date: 1995-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @961538400 {#7316
      date: 2000-06-21 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#93008
  +product: App\Entity\Product\Product {#7311
    #id: 9764
    #code: "IEEE00002869"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038537 {#7274
      date: 2025-06-27 17:35:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34065
        #name: "IEEE C62.48:1995 (R2000)"
        #slug: "ieee-c62-48-1995-r2000-ieee00002869-241416"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Information is provided to users and manufacturers of surge-protective devices(SPDs) about the interactions that may occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V rms. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100–1000 V rms.<br />\n
          This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          This guide will discuss both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide.<br />\n
          An SPD is a device whose primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies, ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or may affect SPDs. The description of the interactions is intended to educate the potential user of such SPDs as to what he or she can expect from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @818982000 {#7318
      date: 1995-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @961538400 {#7316
      date: 2000-06-21 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
    "Confirmed"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductType App\Twig\Components\ProductType 158.0 MiB 0.23 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7311
    #id: 9764
    #code: "IEEE00002869"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038537 {#7274
      date: 2025-06-27 17:35:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34065
        #name: "IEEE C62.48:1995 (R2000)"
        #slug: "ieee-c62-48-1995-r2000-ieee00002869-241416"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Information is provided to users and manufacturers of surge-protective devices(SPDs) about the interactions that may occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V rms. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100–1000 V rms.<br />\n
          This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          This guide will discuss both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide.<br />\n
          An SPD is a device whose primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies, ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or may affect SPDs. The description of the interactions is intended to educate the potential user of such SPDs as to what he or she can expect from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @818982000 {#7318
      date: 1995-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @961538400 {#7316
      date: 2000-06-21 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductType {#93201
  +product: App\Entity\Product\Product {#7311
    #id: 9764
    #code: "IEEE00002869"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038537 {#7274
      date: 2025-06-27 17:35:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34065
        #name: "IEEE C62.48:1995 (R2000)"
        #slug: "ieee-c62-48-1995-r2000-ieee00002869-241416"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Information is provided to users and manufacturers of surge-protective devices(SPDs) about the interactions that may occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V rms. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100–1000 V rms.<br />\n
          This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          This guide will discuss both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide.<br />\n
          An SPD is a device whose primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies, ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or may affect SPDs. The description of the interactions is intended to educate the potential user of such SPDs as to what he or she can expect from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @818982000 {#7318
      date: 1995-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @961538400 {#7316
      date: 2000-06-21 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Standard"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 158.0 MiB 0.82 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7311
    #id: 9764
    #code: "IEEE00002869"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038537 {#7274
      date: 2025-06-27 17:35:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34065
        #name: "IEEE C62.48:1995 (R2000)"
        #slug: "ieee-c62-48-1995-r2000-ieee00002869-241416"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Information is provided to users and manufacturers of surge-protective devices(SPDs) about the interactions that may occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V rms. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100–1000 V rms.<br />\n
          This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          This guide will discuss both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide.<br />\n
          An SPD is a device whose primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies, ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or may affect SPDs. The description of the interactions is intended to educate the potential user of such SPDs as to what he or she can expect from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @818982000 {#7318
      date: 1995-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @961538400 {#7316
      date: 2000-06-21 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#93276
  +product: App\Entity\Product\Product {#7311
    #id: 9764
    #code: "IEEE00002869"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038537 {#7274
      date: 2025-06-27 17:35:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34065
        #name: "IEEE C62.48:1995 (R2000)"
        #slug: "ieee-c62-48-1995-r2000-ieee00002869-241416"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Information is provided to users and manufacturers of surge-protective devices(SPDs) about the interactions that may occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V rms. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100–1000 V rms.<br />\n
          This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          This guide will discuss both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide.<br />\n
          An SPD is a device whose primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies, ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or may affect SPDs. The description of the interactions is intended to educate the potential user of such SPDs as to what he or she can expect from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @818982000 {#7318
      date: 1995-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @961538400 {#7316
      date: 2000-06-21 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductState App\Twig\Components\ProductState 158.0 MiB 0.20 ms
Input props 
[
  "product" => App\Entity\Product\Product {#93699
    #id: 9860
    #code: "IEEE00003100"
    #attributes: Doctrine\ORM\PersistentCollection {#93679 …}
    #variants: Doctrine\ORM\PersistentCollection {#93676 …}
    #options: Doctrine\ORM\PersistentCollection {#93672 …}
    #associations: Doctrine\ORM\PersistentCollection {#93668 …}
    #createdAt: DateTime @1751038617 {#93706
      date: 2025-06-27 17:36:57.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#93685
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93690 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93731
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93699}
        #id: 34449
        #name: "IEEE C62.48:2005"
        #slug: "ieee-c62-48-2005-ieee00003100-241512"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Information is provided to users and manufacturers of surge-protective devices (SPDs) about the interactions that can occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V RMS. The effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 Hz or 60 Hz ac power circuits rated at 100-1000 V rms. This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction among multiple SPDs on the same circuit is also described. This guide discusses both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide. An SPD's primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies (UPSs), ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or can affect SPDs. The description of the interactions is intended to inform the potential user of such SPDs as to what can be expected from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge Protective Devices"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93688 …}
    #channels: Doctrine\ORM\PersistentCollection {#93681 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93686 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93683 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93696 …}
    -apiLastModifiedAt: DateTime @1743289200 {#93669
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#93705
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1131663600 {#93704
      date: 2005-11-11 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1573081200 {#93698
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#93694 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93692 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#106855
  +product: App\Entity\Product\Product {#93699
    #id: 9860
    #code: "IEEE00003100"
    #attributes: Doctrine\ORM\PersistentCollection {#93679 …}
    #variants: Doctrine\ORM\PersistentCollection {#93676 …}
    #options: Doctrine\ORM\PersistentCollection {#93672 …}
    #associations: Doctrine\ORM\PersistentCollection {#93668 …}
    #createdAt: DateTime @1751038617 {#93706
      date: 2025-06-27 17:36:57.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#93685
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93690 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93731
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93699}
        #id: 34449
        #name: "IEEE C62.48:2005"
        #slug: "ieee-c62-48-2005-ieee00003100-241512"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Information is provided to users and manufacturers of surge-protective devices (SPDs) about the interactions that can occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V RMS. The effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 Hz or 60 Hz ac power circuits rated at 100-1000 V rms. This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction among multiple SPDs on the same circuit is also described. This guide discusses both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide. An SPD's primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies (UPSs), ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or can affect SPDs. The description of the interactions is intended to inform the potential user of such SPDs as to what can be expected from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge Protective Devices"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93688 …}
    #channels: Doctrine\ORM\PersistentCollection {#93681 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93686 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93683 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93696 …}
    -apiLastModifiedAt: DateTime @1743289200 {#93669
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#93705
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1131663600 {#93704
      date: 2005-11-11 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1573081200 {#93698
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#93694 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93692 …}
  }
  +appearance: "state-withdrawn"
  +labels: [
    "Withdrawn"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 158.0 MiB 0.72 ms
Input props 
[
  "product" => App\Entity\Product\Product {#93699
    #id: 9860
    #code: "IEEE00003100"
    #attributes: Doctrine\ORM\PersistentCollection {#93679 …}
    #variants: Doctrine\ORM\PersistentCollection {#93676 …}
    #options: Doctrine\ORM\PersistentCollection {#93672 …}
    #associations: Doctrine\ORM\PersistentCollection {#93668 …}
    #createdAt: DateTime @1751038617 {#93706
      date: 2025-06-27 17:36:57.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#93685
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93690 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93731
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93699}
        #id: 34449
        #name: "IEEE C62.48:2005"
        #slug: "ieee-c62-48-2005-ieee00003100-241512"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Information is provided to users and manufacturers of surge-protective devices (SPDs) about the interactions that can occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V RMS. The effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 Hz or 60 Hz ac power circuits rated at 100-1000 V rms. This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction among multiple SPDs on the same circuit is also described. This guide discusses both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide. An SPD's primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies (UPSs), ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or can affect SPDs. The description of the interactions is intended to inform the potential user of such SPDs as to what can be expected from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge Protective Devices"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93688 …}
    #channels: Doctrine\ORM\PersistentCollection {#93681 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93686 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93683 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93696 …}
    -apiLastModifiedAt: DateTime @1743289200 {#93669
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#93705
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1131663600 {#93704
      date: 2005-11-11 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1573081200 {#93698
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#93694 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93692 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#106919
  +product: App\Entity\Product\Product {#93699
    #id: 9860
    #code: "IEEE00003100"
    #attributes: Doctrine\ORM\PersistentCollection {#93679 …}
    #variants: Doctrine\ORM\PersistentCollection {#93676 …}
    #options: Doctrine\ORM\PersistentCollection {#93672 …}
    #associations: Doctrine\ORM\PersistentCollection {#93668 …}
    #createdAt: DateTime @1751038617 {#93706
      date: 2025-06-27 17:36:57.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969444 {#93685
      date: 2025-07-31 15:44:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93690 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93731
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93699}
        #id: 34449
        #name: "IEEE C62.48:2005"
        #slug: "ieee-c62-48-2005-ieee00003100-241512"
        #description: """
          Revision Standard - Inactive-Reserved.<br />\n
          Information is provided to users and manufacturers of surge-protective devices (SPDs) about the interactions that can occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V RMS. The effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 Hz or 60 Hz ac power circuits rated at 100-1000 V rms. This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction among multiple SPDs on the same circuit is also described. This guide discusses both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide. An SPD's primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies (UPSs), ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or can affect SPDs. The description of the interactions is intended to inform the potential user of such SPDs as to what can be expected from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge Protective Devices"
        -notes: "Inactive-Reserved"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93688 …}
    #channels: Doctrine\ORM\PersistentCollection {#93681 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93686 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93683 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93696 …}
    -apiLastModifiedAt: DateTime @1743289200 {#93669
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1581462000 {#93705
      date: 2020-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1131663600 {#93704
      date: 2005-11-11 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @1573081200 {#93698
      date: 2019-11-07 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 26
    -documents: Doctrine\ORM\PersistentCollection {#93694 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93692 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductState App\Twig\Components\ProductState 158.0 MiB 0.19 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7311
    #id: 9764
    #code: "IEEE00002869"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038537 {#7274
      date: 2025-06-27 17:35:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34065
        #name: "IEEE C62.48:1995 (R2000)"
        #slug: "ieee-c62-48-1995-r2000-ieee00002869-241416"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Information is provided to users and manufacturers of surge-protective devices(SPDs) about the interactions that may occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V rms. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100–1000 V rms.<br />\n
          This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          This guide will discuss both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide.<br />\n
          An SPD is a device whose primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies, ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or may affect SPDs. The description of the interactions is intended to educate the potential user of such SPDs as to what he or she can expect from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @818982000 {#7318
      date: 1995-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @961538400 {#7316
      date: 2000-06-21 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#106984
  +product: App\Entity\Product\Product {#7311
    #id: 9764
    #code: "IEEE00002869"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038537 {#7274
      date: 2025-06-27 17:35:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34065
        #name: "IEEE C62.48:1995 (R2000)"
        #slug: "ieee-c62-48-1995-r2000-ieee00002869-241416"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Information is provided to users and manufacturers of surge-protective devices(SPDs) about the interactions that may occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V rms. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100–1000 V rms.<br />\n
          This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          This guide will discuss both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide.<br />\n
          An SPD is a device whose primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies, ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or may affect SPDs. The description of the interactions is intended to educate the potential user of such SPDs as to what he or she can expect from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @818982000 {#7318
      date: 1995-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @961538400 {#7316
      date: 2000-06-21 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
    "Confirmed"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 158.0 MiB 0.66 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7311
    #id: 9764
    #code: "IEEE00002869"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038537 {#7274
      date: 2025-06-27 17:35:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34065
        #name: "IEEE C62.48:1995 (R2000)"
        #slug: "ieee-c62-48-1995-r2000-ieee00002869-241416"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Information is provided to users and manufacturers of surge-protective devices(SPDs) about the interactions that may occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V rms. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100–1000 V rms.<br />\n
          This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          This guide will discuss both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide.<br />\n
          An SPD is a device whose primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies, ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or may affect SPDs. The description of the interactions is intended to educate the potential user of such SPDs as to what he or she can expect from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @818982000 {#7318
      date: 1995-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @961538400 {#7316
      date: 2000-06-21 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#107011
  +product: App\Entity\Product\Product {#7311
    #id: 9764
    #code: "IEEE00002869"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038537 {#7274
      date: 2025-06-27 17:35:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34065
        #name: "IEEE C62.48:1995 (R2000)"
        #slug: "ieee-c62-48-1995-r2000-ieee00002869-241416"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Information is provided to users and manufacturers of surge-protective devices(SPDs) about the interactions that may occur between SPDs and power system disturbances. This guide applies to SPDs manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100-1000 V rms. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          \t\t\t\t<br />\n
          This guide applies to surge-protective devices (SPDs) manufactured to be connected to 50 or 60 Hz ac power circuits rated at 100–1000 V rms.<br />\n
          This guide describes the effects on SPDs of power system disturbances occurring in these low-voltage ac power circuits. The disturbances are not limited to surges. The effects and side effects of the presence and operation of SPDs on the quality of power available to the connected loads are described. The interaction between multiple SPDs on the same circuit is also described.<br />\n
          This guide will discuss both voltage and current surges. The current surges discussed in this guide are the result of voltage surges. Current surges that are solely the result of load changes and do not result in voltage increases, such as a short circuit, are not discussed in this guide.<br />\n
          An SPD is a device whose primary purpose is to provide surge protection. Devices discussed in this guide contain at least one nonlinear component for diverting surge current and/or dissipating surge energy, such as a metal oxide varistor (MOV), silicon avalanche diode (SAD), thyristor, or spark gap. Uninterruptible power supplies, ferroresonators, motor-generators, and filters containing only inductive and/or capacitive components are not considered SPDs in this guide.<br />\n
          The purpose of this document is to provide information on the interactions between power system disturbances and SPDs that is not readily available in other standards. This document provides summary information on power system disturbances that affect or may affect SPDs. The description of the interactions is intended to educate the potential user of such SPDs as to what he or she can expect from such devices.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @818982000 {#7318
      date: 1995-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @961538400 {#7316
      date: 2000-06-21 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.48"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductCard App\Twig\Components\ProductCard 158.0 MiB 6.60 ms
Input props 
[
  "product" => App\Entity\Product\Product {#128312
    #id: 9755
    #code: "IEEE00002856"
    #attributes: Doctrine\ORM\PersistentCollection {#128295 …}
    #variants: Doctrine\ORM\PersistentCollection {#128293 …}
    #options: Doctrine\ORM\PersistentCollection {#128288 …}
    #associations: Doctrine\ORM\PersistentCollection {#128290 …}
    #createdAt: DateTime @1751038529 {#128285
      date: 2025-06-27 17:35:29.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#128320
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128306 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128397
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128312}
        #id: 34029
        #name: "IEEE C62.41:1991 (R1995)"
        #slug: "ieee-c62-41-1991-r1995-ieee00002856-241407"
        #description: """
          Revision Standard - Superseded.<br />\n
          A practical basis is provided for the selection of voltage and current tests to be applied in evaluating the surge withstand capability of equipment connected to utility power circuits, primarily in residential, commercial, and light industrial applications. The recommended practice covers the origin of surge voltages, rate of occurrence and voltage levels in unprotected circuits, waveshapes of representative surge voltages, energy and source and impedance. Three locations categories are defined according to their relative position from the building service entrance. For each category, representative waveforms of surge voltages and surge currents are described, organized in two recommended standard waveforms and three suggested additional waveforms.<br />\n
          \t\t\t\t<br />\n
          The purpose of this recommended practice is to provide information on surge voltages in low-voltage1 ac power circuits. With this information, equipment designers and users can evaluate their operating environment to determine their need for surge-protective devices. The document characterizes electrical distribution systems in which surges exist, based upon the data that have been recorded in interior locations on single-phase and three-phase residential, commercial, and industrial power distribution systems.<br />\n
          There are no specific models that are representative of all surge environments; the complexities of the real world need to be simplified to produce a manageable set of standard surge tests. To this end, a surge environment classification scheme is presented. This classification provides a practical basis for the selection of surge-voltage and surge-current waveforms and amplitudes that may be applied to evaluate the surge withstand capability of equipment connected to these power circuits. It is important to recognize that proper coordination of equipment capability and environment characteristics is required: each environment and the equipment to be protected has to be characterized and the two reconciled.<br />\n
          The surges considered in this document do not exceed one-half period of the normal mains waveform in duration. They may be periodic or random events and may appear in any combination of line, neutral, or grounding conductors. They include those surges with amplitudes, durations, or rates of change sufficient to cause equipment damage or operational upset (see Fig 1). While surge-protective devices acting primarily on the amplitude of the voltage are often applied to divert the damaging surges, the upsetting surges may require other remedies.<br />\n
          Test procedures are described in IEEE C62.45-1987 [8],2 as a companion to the present document. Other surge-related standards are identified in Section 4; the present document is intended to complement these standards.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128304 …}
    #channels: Doctrine\ORM\PersistentCollection {#128297 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128301 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128299 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128314 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128271
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128319
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @687135600 {#128278
      date: 1991-10-11 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @803080800 {#128291
      date: 1995-06-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.41"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#128310 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128308 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "additionalClasses" => "product__teaser--with-grey-border"
  "hasStretchedLink" => true
  "hoverType" => "shadow"
  "linkLabel" => "See more"
]
Attributes 
[]
Component 
App\Twig\Components\ProductCard {#128368
  +product: App\Entity\Product\Product {#128312
    #id: 9755
    #code: "IEEE00002856"
    #attributes: Doctrine\ORM\PersistentCollection {#128295 …}
    #variants: Doctrine\ORM\PersistentCollection {#128293 …}
    #options: Doctrine\ORM\PersistentCollection {#128288 …}
    #associations: Doctrine\ORM\PersistentCollection {#128290 …}
    #createdAt: DateTime @1751038529 {#128285
      date: 2025-06-27 17:35:29.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#128320
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128306 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128397
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128312}
        #id: 34029
        #name: "IEEE C62.41:1991 (R1995)"
        #slug: "ieee-c62-41-1991-r1995-ieee00002856-241407"
        #description: """
          Revision Standard - Superseded.<br />\n
          A practical basis is provided for the selection of voltage and current tests to be applied in evaluating the surge withstand capability of equipment connected to utility power circuits, primarily in residential, commercial, and light industrial applications. The recommended practice covers the origin of surge voltages, rate of occurrence and voltage levels in unprotected circuits, waveshapes of representative surge voltages, energy and source and impedance. Three locations categories are defined according to their relative position from the building service entrance. For each category, representative waveforms of surge voltages and surge currents are described, organized in two recommended standard waveforms and three suggested additional waveforms.<br />\n
          \t\t\t\t<br />\n
          The purpose of this recommended practice is to provide information on surge voltages in low-voltage1 ac power circuits. With this information, equipment designers and users can evaluate their operating environment to determine their need for surge-protective devices. The document characterizes electrical distribution systems in which surges exist, based upon the data that have been recorded in interior locations on single-phase and three-phase residential, commercial, and industrial power distribution systems.<br />\n
          There are no specific models that are representative of all surge environments; the complexities of the real world need to be simplified to produce a manageable set of standard surge tests. To this end, a surge environment classification scheme is presented. This classification provides a practical basis for the selection of surge-voltage and surge-current waveforms and amplitudes that may be applied to evaluate the surge withstand capability of equipment connected to these power circuits. It is important to recognize that proper coordination of equipment capability and environment characteristics is required: each environment and the equipment to be protected has to be characterized and the two reconciled.<br />\n
          The surges considered in this document do not exceed one-half period of the normal mains waveform in duration. They may be periodic or random events and may appear in any combination of line, neutral, or grounding conductors. They include those surges with amplitudes, durations, or rates of change sufficient to cause equipment damage or operational upset (see Fig 1). While surge-protective devices acting primarily on the amplitude of the voltage are often applied to divert the damaging surges, the upsetting surges may require other remedies.<br />\n
          Test procedures are described in IEEE C62.45-1987 [8],2 as a companion to the present document. Other surge-related standards are identified in Section 4; the present document is intended to complement these standards.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128304 …}
    #channels: Doctrine\ORM\PersistentCollection {#128297 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128301 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128299 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128314 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128271
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128319
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @687135600 {#128278
      date: 1991-10-11 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @803080800 {#128291
      date: 1995-06-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.41"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#128310 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128308 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "product__teaser--with-grey-border"
  +linkLabel: "See more"
  +imageFilter: "product_thumbnail_teaser"
  +hasStretchedLink: true
  +backgroundColor: "white"
  +hoverType: "shadow"
}
ProductState App\Twig\Components\ProductState 158.0 MiB 0.19 ms
Input props 
[
  "product" => App\Entity\Product\Product {#128312
    #id: 9755
    #code: "IEEE00002856"
    #attributes: Doctrine\ORM\PersistentCollection {#128295 …}
    #variants: Doctrine\ORM\PersistentCollection {#128293 …}
    #options: Doctrine\ORM\PersistentCollection {#128288 …}
    #associations: Doctrine\ORM\PersistentCollection {#128290 …}
    #createdAt: DateTime @1751038529 {#128285
      date: 2025-06-27 17:35:29.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#128320
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128306 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128397
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128312}
        #id: 34029
        #name: "IEEE C62.41:1991 (R1995)"
        #slug: "ieee-c62-41-1991-r1995-ieee00002856-241407"
        #description: """
          Revision Standard - Superseded.<br />\n
          A practical basis is provided for the selection of voltage and current tests to be applied in evaluating the surge withstand capability of equipment connected to utility power circuits, primarily in residential, commercial, and light industrial applications. The recommended practice covers the origin of surge voltages, rate of occurrence and voltage levels in unprotected circuits, waveshapes of representative surge voltages, energy and source and impedance. Three locations categories are defined according to their relative position from the building service entrance. For each category, representative waveforms of surge voltages and surge currents are described, organized in two recommended standard waveforms and three suggested additional waveforms.<br />\n
          \t\t\t\t<br />\n
          The purpose of this recommended practice is to provide information on surge voltages in low-voltage1 ac power circuits. With this information, equipment designers and users can evaluate their operating environment to determine their need for surge-protective devices. The document characterizes electrical distribution systems in which surges exist, based upon the data that have been recorded in interior locations on single-phase and three-phase residential, commercial, and industrial power distribution systems.<br />\n
          There are no specific models that are representative of all surge environments; the complexities of the real world need to be simplified to produce a manageable set of standard surge tests. To this end, a surge environment classification scheme is presented. This classification provides a practical basis for the selection of surge-voltage and surge-current waveforms and amplitudes that may be applied to evaluate the surge withstand capability of equipment connected to these power circuits. It is important to recognize that proper coordination of equipment capability and environment characteristics is required: each environment and the equipment to be protected has to be characterized and the two reconciled.<br />\n
          The surges considered in this document do not exceed one-half period of the normal mains waveform in duration. They may be periodic or random events and may appear in any combination of line, neutral, or grounding conductors. They include those surges with amplitudes, durations, or rates of change sufficient to cause equipment damage or operational upset (see Fig 1). While surge-protective devices acting primarily on the amplitude of the voltage are often applied to divert the damaging surges, the upsetting surges may require other remedies.<br />\n
          Test procedures are described in IEEE C62.45-1987 [8],2 as a companion to the present document. Other surge-related standards are identified in Section 4; the present document is intended to complement these standards.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128304 …}
    #channels: Doctrine\ORM\PersistentCollection {#128297 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128301 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128299 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128314 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128271
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128319
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @687135600 {#128278
      date: 1991-10-11 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @803080800 {#128291
      date: 1995-06-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.41"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#128310 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128308 …}
  }
]
Attributes 
[
  "showFullLabel" => false
]
Component 
App\Twig\Components\ProductState {#128401
  +product: App\Entity\Product\Product {#128312
    #id: 9755
    #code: "IEEE00002856"
    #attributes: Doctrine\ORM\PersistentCollection {#128295 …}
    #variants: Doctrine\ORM\PersistentCollection {#128293 …}
    #options: Doctrine\ORM\PersistentCollection {#128288 …}
    #associations: Doctrine\ORM\PersistentCollection {#128290 …}
    #createdAt: DateTime @1751038529 {#128285
      date: 2025-06-27 17:35:29.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#128320
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128306 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128397
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128312}
        #id: 34029
        #name: "IEEE C62.41:1991 (R1995)"
        #slug: "ieee-c62-41-1991-r1995-ieee00002856-241407"
        #description: """
          Revision Standard - Superseded.<br />\n
          A practical basis is provided for the selection of voltage and current tests to be applied in evaluating the surge withstand capability of equipment connected to utility power circuits, primarily in residential, commercial, and light industrial applications. The recommended practice covers the origin of surge voltages, rate of occurrence and voltage levels in unprotected circuits, waveshapes of representative surge voltages, energy and source and impedance. Three locations categories are defined according to their relative position from the building service entrance. For each category, representative waveforms of surge voltages and surge currents are described, organized in two recommended standard waveforms and three suggested additional waveforms.<br />\n
          \t\t\t\t<br />\n
          The purpose of this recommended practice is to provide information on surge voltages in low-voltage1 ac power circuits. With this information, equipment designers and users can evaluate their operating environment to determine their need for surge-protective devices. The document characterizes electrical distribution systems in which surges exist, based upon the data that have been recorded in interior locations on single-phase and three-phase residential, commercial, and industrial power distribution systems.<br />\n
          There are no specific models that are representative of all surge environments; the complexities of the real world need to be simplified to produce a manageable set of standard surge tests. To this end, a surge environment classification scheme is presented. This classification provides a practical basis for the selection of surge-voltage and surge-current waveforms and amplitudes that may be applied to evaluate the surge withstand capability of equipment connected to these power circuits. It is important to recognize that proper coordination of equipment capability and environment characteristics is required: each environment and the equipment to be protected has to be characterized and the two reconciled.<br />\n
          The surges considered in this document do not exceed one-half period of the normal mains waveform in duration. They may be periodic or random events and may appear in any combination of line, neutral, or grounding conductors. They include those surges with amplitudes, durations, or rates of change sufficient to cause equipment damage or operational upset (see Fig 1). While surge-protective devices acting primarily on the amplitude of the voltage are often applied to divert the damaging surges, the upsetting surges may require other remedies.<br />\n
          Test procedures are described in IEEE C62.45-1987 [8],2 as a companion to the present document. Other surge-related standards are identified in Section 4; the present document is intended to complement these standards.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128304 …}
    #channels: Doctrine\ORM\PersistentCollection {#128297 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128301 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128299 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128314 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128271
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128319
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @687135600 {#128278
      date: 1991-10-11 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @803080800 {#128291
      date: 1995-06-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.41"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#128310 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128308 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 158.0 MiB 0.69 ms
Input props 
[
  "product" => App\Entity\Product\Product {#128312
    #id: 9755
    #code: "IEEE00002856"
    #attributes: Doctrine\ORM\PersistentCollection {#128295 …}
    #variants: Doctrine\ORM\PersistentCollection {#128293 …}
    #options: Doctrine\ORM\PersistentCollection {#128288 …}
    #associations: Doctrine\ORM\PersistentCollection {#128290 …}
    #createdAt: DateTime @1751038529 {#128285
      date: 2025-06-27 17:35:29.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#128320
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128306 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128397
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128312}
        #id: 34029
        #name: "IEEE C62.41:1991 (R1995)"
        #slug: "ieee-c62-41-1991-r1995-ieee00002856-241407"
        #description: """
          Revision Standard - Superseded.<br />\n
          A practical basis is provided for the selection of voltage and current tests to be applied in evaluating the surge withstand capability of equipment connected to utility power circuits, primarily in residential, commercial, and light industrial applications. The recommended practice covers the origin of surge voltages, rate of occurrence and voltage levels in unprotected circuits, waveshapes of representative surge voltages, energy and source and impedance. Three locations categories are defined according to their relative position from the building service entrance. For each category, representative waveforms of surge voltages and surge currents are described, organized in two recommended standard waveforms and three suggested additional waveforms.<br />\n
          \t\t\t\t<br />\n
          The purpose of this recommended practice is to provide information on surge voltages in low-voltage1 ac power circuits. With this information, equipment designers and users can evaluate their operating environment to determine their need for surge-protective devices. The document characterizes electrical distribution systems in which surges exist, based upon the data that have been recorded in interior locations on single-phase and three-phase residential, commercial, and industrial power distribution systems.<br />\n
          There are no specific models that are representative of all surge environments; the complexities of the real world need to be simplified to produce a manageable set of standard surge tests. To this end, a surge environment classification scheme is presented. This classification provides a practical basis for the selection of surge-voltage and surge-current waveforms and amplitudes that may be applied to evaluate the surge withstand capability of equipment connected to these power circuits. It is important to recognize that proper coordination of equipment capability and environment characteristics is required: each environment and the equipment to be protected has to be characterized and the two reconciled.<br />\n
          The surges considered in this document do not exceed one-half period of the normal mains waveform in duration. They may be periodic or random events and may appear in any combination of line, neutral, or grounding conductors. They include those surges with amplitudes, durations, or rates of change sufficient to cause equipment damage or operational upset (see Fig 1). While surge-protective devices acting primarily on the amplitude of the voltage are often applied to divert the damaging surges, the upsetting surges may require other remedies.<br />\n
          Test procedures are described in IEEE C62.45-1987 [8],2 as a companion to the present document. Other surge-related standards are identified in Section 4; the present document is intended to complement these standards.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128304 …}
    #channels: Doctrine\ORM\PersistentCollection {#128297 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128301 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128299 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128314 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128271
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128319
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @687135600 {#128278
      date: 1991-10-11 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @803080800 {#128291
      date: 1995-06-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.41"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#128310 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128308 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#128479
  +product: App\Entity\Product\Product {#128312
    #id: 9755
    #code: "IEEE00002856"
    #attributes: Doctrine\ORM\PersistentCollection {#128295 …}
    #variants: Doctrine\ORM\PersistentCollection {#128293 …}
    #options: Doctrine\ORM\PersistentCollection {#128288 …}
    #associations: Doctrine\ORM\PersistentCollection {#128290 …}
    #createdAt: DateTime @1751038529 {#128285
      date: 2025-06-27 17:35:29.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#128320
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#128306 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#128397
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#128312}
        #id: 34029
        #name: "IEEE C62.41:1991 (R1995)"
        #slug: "ieee-c62-41-1991-r1995-ieee00002856-241407"
        #description: """
          Revision Standard - Superseded.<br />\n
          A practical basis is provided for the selection of voltage and current tests to be applied in evaluating the surge withstand capability of equipment connected to utility power circuits, primarily in residential, commercial, and light industrial applications. The recommended practice covers the origin of surge voltages, rate of occurrence and voltage levels in unprotected circuits, waveshapes of representative surge voltages, energy and source and impedance. Three locations categories are defined according to their relative position from the building service entrance. For each category, representative waveforms of surge voltages and surge currents are described, organized in two recommended standard waveforms and three suggested additional waveforms.<br />\n
          \t\t\t\t<br />\n
          The purpose of this recommended practice is to provide information on surge voltages in low-voltage1 ac power circuits. With this information, equipment designers and users can evaluate their operating environment to determine their need for surge-protective devices. The document characterizes electrical distribution systems in which surges exist, based upon the data that have been recorded in interior locations on single-phase and three-phase residential, commercial, and industrial power distribution systems.<br />\n
          There are no specific models that are representative of all surge environments; the complexities of the real world need to be simplified to produce a manageable set of standard surge tests. To this end, a surge environment classification scheme is presented. This classification provides a practical basis for the selection of surge-voltage and surge-current waveforms and amplitudes that may be applied to evaluate the surge withstand capability of equipment connected to these power circuits. It is important to recognize that proper coordination of equipment capability and environment characteristics is required: each environment and the equipment to be protected has to be characterized and the two reconciled.<br />\n
          The surges considered in this document do not exceed one-half period of the normal mains waveform in duration. They may be periodic or random events and may appear in any combination of line, neutral, or grounding conductors. They include those surges with amplitudes, durations, or rates of change sufficient to cause equipment damage or operational upset (see Fig 1). While surge-protective devices acting primarily on the amplitude of the voltage are often applied to divert the damaging surges, the upsetting surges may require other remedies.<br />\n
          Test procedures are described in IEEE C62.45-1987 [8],2 as a companion to the present document. Other surge-related standards are identified in Section 4; the present document is intended to complement these standards.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#128304 …}
    #channels: Doctrine\ORM\PersistentCollection {#128297 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#128301 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#128299 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#128314 …}
    -apiLastModifiedAt: DateTime @1754517600 {#128271
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#128319
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @687135600 {#128278
      date: 1991-10-11 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: DateTime @803080800 {#128291
      date: 1995-06-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -canceledAt: null
    -edition: null
    -coreDocument: "C62.41"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#128310 …}
    -favorites: Doctrine\ORM\PersistentCollection {#128308 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}