Symfony Profiler

[
  "product" => App\Entity\Product\Product {#7310
    #id: 9775
    #code: "IEEE00002887"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038547 {#7274
      date: 2025-06-27 17:35:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 34109
        #name: "IEEE/ANSI C63.2:1996"
        #slug: "ieee-ansi-c63-2-1996-ieee00002887-241427"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 Hz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE — Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sinewaves, and components of electric and electromagnetic disturbances, including transients that may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter (FSVM). With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comité International Special des Perturbations Radioélectriques (International Special Committee on Radio Interference) (CISPR) [see CISPR Publication 16 (1987)]. An optional discharge time constant is also specified.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is required to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities. Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not within the scope of the present standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed supplement to this standard. However, a measuring set configured around a spectrum analyzer that meets the requirements of this standard may be used. For measurements made on paired telecommunications lines, refer to IEEE Std 743-1984. Instrumentation specifications for measurement of telecommunications terminal equipment for compliance to technical standards of regulatory authorities are under consideration.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @826585200 {#7318
      date: 1996-03-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#93007
  +product: App\Entity\Product\Product {#7310
    #id: 9775
    #code: "IEEE00002887"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038547 {#7274
      date: 2025-06-27 17:35:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 34109
        #name: "IEEE/ANSI C63.2:1996"
        #slug: "ieee-ansi-c63-2-1996-ieee00002887-241427"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 Hz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE — Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sinewaves, and components of electric and electromagnetic disturbances, including transients that may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter (FSVM). With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comité International Special des Perturbations Radioélectriques (International Special Committee on Radio Interference) (CISPR) [see CISPR Publication 16 (1987)]. An optional discharge time constant is also specified.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is required to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities. Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not within the scope of the present standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed supplement to this standard. However, a measuring set configured around a spectrum analyzer that meets the requirements of this standard may be used. For measurements made on paired telecommunications lines, refer to IEEE Std 743-1984. Instrumentation specifications for measurement of telecommunications terminal equipment for compliance to technical standards of regulatory authorities are under consideration.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @826585200 {#7318
      date: 1996-03-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 9775
    #code: "IEEE00002887"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038547 {#7274
      date: 2025-06-27 17:35:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 34109
        #name: "IEEE/ANSI C63.2:1996"
        #slug: "ieee-ansi-c63-2-1996-ieee00002887-241427"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 Hz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE — Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sinewaves, and components of electric and electromagnetic disturbances, including transients that may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter (FSVM). With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comité International Special des Perturbations Radioélectriques (International Special Committee on Radio Interference) (CISPR) [see CISPR Publication 16 (1987)]. An optional discharge time constant is also specified.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is required to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities. Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not within the scope of the present standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed supplement to this standard. However, a measuring set configured around a spectrum analyzer that meets the requirements of this standard may be used. For measurements made on paired telecommunications lines, refer to IEEE Std 743-1984. Instrumentation specifications for measurement of telecommunications terminal equipment for compliance to technical standards of regulatory authorities are under consideration.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @826585200 {#7318
      date: 1996-03-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]

App\Twig\Components\ProductType {#93187
  +product: App\Entity\Product\Product {#7310
    #id: 9775
    #code: "IEEE00002887"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038547 {#7274
      date: 2025-06-27 17:35:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 34109
        #name: "IEEE/ANSI C63.2:1996"
        #slug: "ieee-ansi-c63-2-1996-ieee00002887-241427"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 Hz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE — Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sinewaves, and components of electric and electromagnetic disturbances, including transients that may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter (FSVM). With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comité International Special des Perturbations Radioélectriques (International Special Committee on Radio Interference) (CISPR) [see CISPR Publication 16 (1987)]. An optional discharge time constant is also specified.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is required to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities. Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not within the scope of the present standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed supplement to this standard. However, a measuring set configured around a spectrum analyzer that meets the requirements of this standard may be used. For measurements made on paired telecommunications lines, refer to IEEE Std 743-1984. Instrumentation specifications for measurement of telecommunications terminal equipment for compliance to technical standards of regulatory authorities are under consideration.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @826585200 {#7318
      date: 1996-03-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Standard"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 9775
    #code: "IEEE00002887"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038547 {#7274
      date: 2025-06-27 17:35:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 34109
        #name: "IEEE/ANSI C63.2:1996"
        #slug: "ieee-ansi-c63-2-1996-ieee00002887-241427"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 Hz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE — Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sinewaves, and components of electric and electromagnetic disturbances, including transients that may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter (FSVM). With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comité International Special des Perturbations Radioélectriques (International Special Committee on Radio Interference) (CISPR) [see CISPR Publication 16 (1987)]. An optional discharge time constant is also specified.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is required to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities. Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not within the scope of the present standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed supplement to this standard. However, a measuring set configured around a spectrum analyzer that meets the requirements of this standard may be used. For measurements made on paired telecommunications lines, refer to IEEE Std 743-1984. Instrumentation specifications for measurement of telecommunications terminal equipment for compliance to technical standards of regulatory authorities are under consideration.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @826585200 {#7318
      date: 1996-03-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]

App\Twig\Components\ProductMostRecent {#93262
  +product: App\Entity\Product\Product {#7310
    #id: 9775
    #code: "IEEE00002887"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038547 {#7274
      date: 2025-06-27 17:35:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 34109
        #name: "IEEE/ANSI C63.2:1996"
        #slug: "ieee-ansi-c63-2-1996-ieee00002887-241427"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 Hz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE — Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sinewaves, and components of electric and electromagnetic disturbances, including transients that may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter (FSVM). With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comité International Special des Perturbations Radioélectriques (International Special Committee on Radio Interference) (CISPR) [see CISPR Publication 16 (1987)]. An optional discharge time constant is also specified.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is required to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities. Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not within the scope of the present standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed supplement to this standard. However, a measuring set configured around a spectrum analyzer that meets the requirements of this standard may be used. For measurements made on paired telecommunications lines, refer to IEEE Std 743-1984. Instrumentation specifications for measurement of telecommunications terminal equipment for compliance to technical standards of regulatory authorities are under consideration.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @826585200 {#7318
      date: 1996-03-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#93685
    #id: 13031
    #code: "IEEE00011340"
    #attributes: Doctrine\ORM\PersistentCollection {#93667 …}
    #variants: Doctrine\ORM\PersistentCollection {#93664 …}
    #options: Doctrine\ORM\PersistentCollection {#93660 …}
    #associations: Doctrine\ORM\PersistentCollection {#93662 …}
    #createdAt: DateTime @1751040817 {#93693
      date: 2025-06-27 18:13:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93672
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93678 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93713
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93685}
        #id: 47133
        #name: "IEEE C63.2:2023"
        #slug: "ieee-c63-2-2023-ieee00011340-244690"
        #description: """
          Revision Standard - Active.<br />\n
          Requirements for measuring instruments used for electromagnetic interference (EMI) measurements are provided, involving quasi-peak, peak, and average detection in the frequency range 9 kHz to 40 GHz.<br />\n
          \t\t\t\t<br />\n
          This standard specifies requirements for measuring receivers [i.e., electromagnetic interference (EMI) receivers and spectrum analyzers with and without preselection] used for radiated and conducted emission measurements. Specifications relate to the measuring equipment only, not transducers like antennas, line impedance stabilization networks (LISNs), or current probes.<br />\n
          This standard has been prepared to consolidate the applicable requirements found in CISPR 16-1-1:2019 as well as ANSI C63.2:2016 into one standard for the purpose of providing a harmonized set of specifications such that the same instrument can be used for measurements in accordance with national and international standards.6 Additional requirements have been added to address domestic measurement needs as well as requirements for the frequency range 18 GHz to 40 GHz.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93676 …}
    #channels: Doctrine\ORM\PersistentCollection {#93669 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93674 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93671 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93686 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93656
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1739314800 {#93692
      date: 2025-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1697580000 {#93691
      date: 2023-10-18 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 17
    -documents: Doctrine\ORM\PersistentCollection {#93682 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93680 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#106975
  +product: App\Entity\Product\Product {#93685
    #id: 13031
    #code: "IEEE00011340"
    #attributes: Doctrine\ORM\PersistentCollection {#93667 …}
    #variants: Doctrine\ORM\PersistentCollection {#93664 …}
    #options: Doctrine\ORM\PersistentCollection {#93660 …}
    #associations: Doctrine\ORM\PersistentCollection {#93662 …}
    #createdAt: DateTime @1751040817 {#93693
      date: 2025-06-27 18:13:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93672
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93678 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93713
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93685}
        #id: 47133
        #name: "IEEE C63.2:2023"
        #slug: "ieee-c63-2-2023-ieee00011340-244690"
        #description: """
          Revision Standard - Active.<br />\n
          Requirements for measuring instruments used for electromagnetic interference (EMI) measurements are provided, involving quasi-peak, peak, and average detection in the frequency range 9 kHz to 40 GHz.<br />\n
          \t\t\t\t<br />\n
          This standard specifies requirements for measuring receivers [i.e., electromagnetic interference (EMI) receivers and spectrum analyzers with and without preselection] used for radiated and conducted emission measurements. Specifications relate to the measuring equipment only, not transducers like antennas, line impedance stabilization networks (LISNs), or current probes.<br />\n
          This standard has been prepared to consolidate the applicable requirements found in CISPR 16-1-1:2019 as well as ANSI C63.2:2016 into one standard for the purpose of providing a harmonized set of specifications such that the same instrument can be used for measurements in accordance with national and international standards.6 Additional requirements have been added to address domestic measurement needs as well as requirements for the frequency range 18 GHz to 40 GHz.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93676 …}
    #channels: Doctrine\ORM\PersistentCollection {#93669 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93674 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93671 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93686 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93656
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1739314800 {#93692
      date: 2025-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1697580000 {#93691
      date: 2023-10-18 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 17
    -documents: Doctrine\ORM\PersistentCollection {#93682 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93680 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#93685
    #id: 13031
    #code: "IEEE00011340"
    #attributes: Doctrine\ORM\PersistentCollection {#93667 …}
    #variants: Doctrine\ORM\PersistentCollection {#93664 …}
    #options: Doctrine\ORM\PersistentCollection {#93660 …}
    #associations: Doctrine\ORM\PersistentCollection {#93662 …}
    #createdAt: DateTime @1751040817 {#93693
      date: 2025-06-27 18:13:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93672
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93678 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93713
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93685}
        #id: 47133
        #name: "IEEE C63.2:2023"
        #slug: "ieee-c63-2-2023-ieee00011340-244690"
        #description: """
          Revision Standard - Active.<br />\n
          Requirements for measuring instruments used for electromagnetic interference (EMI) measurements are provided, involving quasi-peak, peak, and average detection in the frequency range 9 kHz to 40 GHz.<br />\n
          \t\t\t\t<br />\n
          This standard specifies requirements for measuring receivers [i.e., electromagnetic interference (EMI) receivers and spectrum analyzers with and without preselection] used for radiated and conducted emission measurements. Specifications relate to the measuring equipment only, not transducers like antennas, line impedance stabilization networks (LISNs), or current probes.<br />\n
          This standard has been prepared to consolidate the applicable requirements found in CISPR 16-1-1:2019 as well as ANSI C63.2:2016 into one standard for the purpose of providing a harmonized set of specifications such that the same instrument can be used for measurements in accordance with national and international standards.6 Additional requirements have been added to address domestic measurement needs as well as requirements for the frequency range 18 GHz to 40 GHz.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93676 …}
    #channels: Doctrine\ORM\PersistentCollection {#93669 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93674 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93671 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93686 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93656
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1739314800 {#93692
      date: 2025-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1697580000 {#93691
      date: 2023-10-18 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 17
    -documents: Doctrine\ORM\PersistentCollection {#93682 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93680 …}
  }
]

App\Twig\Components\ProductMostRecent {#107042
  +product: App\Entity\Product\Product {#93685
    #id: 13031
    #code: "IEEE00011340"
    #attributes: Doctrine\ORM\PersistentCollection {#93667 …}
    #variants: Doctrine\ORM\PersistentCollection {#93664 …}
    #options: Doctrine\ORM\PersistentCollection {#93660 …}
    #associations: Doctrine\ORM\PersistentCollection {#93662 …}
    #createdAt: DateTime @1751040817 {#93693
      date: 2025-06-27 18:13:37.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93672
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93678 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93713
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93685}
        #id: 47133
        #name: "IEEE C63.2:2023"
        #slug: "ieee-c63-2-2023-ieee00011340-244690"
        #description: """
          Revision Standard - Active.<br />\n
          Requirements for measuring instruments used for electromagnetic interference (EMI) measurements are provided, involving quasi-peak, peak, and average detection in the frequency range 9 kHz to 40 GHz.<br />\n
          \t\t\t\t<br />\n
          This standard specifies requirements for measuring receivers [i.e., electromagnetic interference (EMI) receivers and spectrum analyzers with and without preselection] used for radiated and conducted emission measurements. Specifications relate to the measuring equipment only, not transducers like antennas, line impedance stabilization networks (LISNs), or current probes.<br />\n
          This standard has been prepared to consolidate the applicable requirements found in CISPR 16-1-1:2019 as well as ANSI C63.2:2016 into one standard for the purpose of providing a harmonized set of specifications such that the same instrument can be used for measurements in accordance with national and international standards.6 Additional requirements have been added to address domestic measurement needs as well as requirements for the frequency range 18 GHz to 40 GHz.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93676 …}
    #channels: Doctrine\ORM\PersistentCollection {#93669 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93674 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93671 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93686 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93656
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1739314800 {#93692
      date: 2025-02-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1697580000 {#93691
      date: 2023-10-18 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 17
    -documents: Doctrine\ORM\PersistentCollection {#93682 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93680 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106815
    #id: 11442
    #code: "IEEE00006146"
    #attributes: Doctrine\ORM\PersistentCollection {#106798 …}
    #variants: Doctrine\ORM\PersistentCollection {#106795 …}
    #options: Doctrine\ORM\PersistentCollection {#106791 …}
    #associations: Doctrine\ORM\PersistentCollection {#106793 …}
    #createdAt: DateTime @1751039707 {#106783
      date: 2025-06-27 17:55:07.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970307 {#106796
      date: 2025-07-31 15:58:27.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106809 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107117
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106815}
        #id: 40777
        #name: "IEEE/ANSI C63.2:2016"
        #slug: "ieee-ansi-c63-2-2016-ieee00006146-243094"
        #description: """
          Revision Standard - Superseded.<br />\n
          Requirements for measuring instruments used for electromagnetic interference (EMI) measurements are provided, involving quasi-peak, peak, and average detection in the frequency range 9 kHz to 40 GHz.<br />\n
          \t\t\t\t<br />\n
          This standard specifies requirements for measuring receivers [i.e., electromagnetic interference (EMI) receivers and spectrum analyzers with and without preselection] used for radiated and conducted emission measurements. Specifications relate to the measuring equipment only, not transducers like antennas, line impedance stabilization networks (LISNs), or current probes.<br />\n
          This standard has been prepared to consolidate the applicable requirements found in CISPR 16-1-1:2010 as well as ANSI C63.2 into one standard for the purpose of providing a harmonized set of specifications such that the same instrument can be used for measurements in accordance with national and international standards.1 Additional requirements have been added to address domestic measurement needs as well as requirements for the frequency range 18 GHz to 40 GHz.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106806 …}
    #channels: Doctrine\ORM\PersistentCollection {#106800 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106804 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106802 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106816 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106823
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1697061600 {#106827
      date: 2023-10-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1487545200 {#106781
      date: 2017-02-20 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 17
    -documents: Doctrine\ORM\PersistentCollection {#106813 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106811 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107132
  +product: App\Entity\Product\Product {#106815
    #id: 11442
    #code: "IEEE00006146"
    #attributes: Doctrine\ORM\PersistentCollection {#106798 …}
    #variants: Doctrine\ORM\PersistentCollection {#106795 …}
    #options: Doctrine\ORM\PersistentCollection {#106791 …}
    #associations: Doctrine\ORM\PersistentCollection {#106793 …}
    #createdAt: DateTime @1751039707 {#106783
      date: 2025-06-27 17:55:07.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970307 {#106796
      date: 2025-07-31 15:58:27.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106809 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107117
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106815}
        #id: 40777
        #name: "IEEE/ANSI C63.2:2016"
        #slug: "ieee-ansi-c63-2-2016-ieee00006146-243094"
        #description: """
          Revision Standard - Superseded.<br />\n
          Requirements for measuring instruments used for electromagnetic interference (EMI) measurements are provided, involving quasi-peak, peak, and average detection in the frequency range 9 kHz to 40 GHz.<br />\n
          \t\t\t\t<br />\n
          This standard specifies requirements for measuring receivers [i.e., electromagnetic interference (EMI) receivers and spectrum analyzers with and without preselection] used for radiated and conducted emission measurements. Specifications relate to the measuring equipment only, not transducers like antennas, line impedance stabilization networks (LISNs), or current probes.<br />\n
          This standard has been prepared to consolidate the applicable requirements found in CISPR 16-1-1:2010 as well as ANSI C63.2 into one standard for the purpose of providing a harmonized set of specifications such that the same instrument can be used for measurements in accordance with national and international standards.1 Additional requirements have been added to address domestic measurement needs as well as requirements for the frequency range 18 GHz to 40 GHz.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106806 …}
    #channels: Doctrine\ORM\PersistentCollection {#106800 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106804 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106802 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106816 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106823
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1697061600 {#106827
      date: 2023-10-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1487545200 {#106781
      date: 2017-02-20 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 17
    -documents: Doctrine\ORM\PersistentCollection {#106813 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106811 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106815
    #id: 11442
    #code: "IEEE00006146"
    #attributes: Doctrine\ORM\PersistentCollection {#106798 …}
    #variants: Doctrine\ORM\PersistentCollection {#106795 …}
    #options: Doctrine\ORM\PersistentCollection {#106791 …}
    #associations: Doctrine\ORM\PersistentCollection {#106793 …}
    #createdAt: DateTime @1751039707 {#106783
      date: 2025-06-27 17:55:07.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970307 {#106796
      date: 2025-07-31 15:58:27.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106809 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107117
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106815}
        #id: 40777
        #name: "IEEE/ANSI C63.2:2016"
        #slug: "ieee-ansi-c63-2-2016-ieee00006146-243094"
        #description: """
          Revision Standard - Superseded.<br />\n
          Requirements for measuring instruments used for electromagnetic interference (EMI) measurements are provided, involving quasi-peak, peak, and average detection in the frequency range 9 kHz to 40 GHz.<br />\n
          \t\t\t\t<br />\n
          This standard specifies requirements for measuring receivers [i.e., electromagnetic interference (EMI) receivers and spectrum analyzers with and without preselection] used for radiated and conducted emission measurements. Specifications relate to the measuring equipment only, not transducers like antennas, line impedance stabilization networks (LISNs), or current probes.<br />\n
          This standard has been prepared to consolidate the applicable requirements found in CISPR 16-1-1:2010 as well as ANSI C63.2 into one standard for the purpose of providing a harmonized set of specifications such that the same instrument can be used for measurements in accordance with national and international standards.1 Additional requirements have been added to address domestic measurement needs as well as requirements for the frequency range 18 GHz to 40 GHz.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106806 …}
    #channels: Doctrine\ORM\PersistentCollection {#106800 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106804 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106802 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106816 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106823
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1697061600 {#106827
      date: 2023-10-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1487545200 {#106781
      date: 2017-02-20 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 17
    -documents: Doctrine\ORM\PersistentCollection {#106813 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106811 …}
  }
]

App\Twig\Components\ProductMostRecent {#107184
  +product: App\Entity\Product\Product {#106815
    #id: 11442
    #code: "IEEE00006146"
    #attributes: Doctrine\ORM\PersistentCollection {#106798 …}
    #variants: Doctrine\ORM\PersistentCollection {#106795 …}
    #options: Doctrine\ORM\PersistentCollection {#106791 …}
    #associations: Doctrine\ORM\PersistentCollection {#106793 …}
    #createdAt: DateTime @1751039707 {#106783
      date: 2025-06-27 17:55:07.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970307 {#106796
      date: 2025-07-31 15:58:27.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106809 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107117
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106815}
        #id: 40777
        #name: "IEEE/ANSI C63.2:2016"
        #slug: "ieee-ansi-c63-2-2016-ieee00006146-243094"
        #description: """
          Revision Standard - Superseded.<br />\n
          Requirements for measuring instruments used for electromagnetic interference (EMI) measurements are provided, involving quasi-peak, peak, and average detection in the frequency range 9 kHz to 40 GHz.<br />\n
          \t\t\t\t<br />\n
          This standard specifies requirements for measuring receivers [i.e., electromagnetic interference (EMI) receivers and spectrum analyzers with and without preselection] used for radiated and conducted emission measurements. Specifications relate to the measuring equipment only, not transducers like antennas, line impedance stabilization networks (LISNs), or current probes.<br />\n
          This standard has been prepared to consolidate the applicable requirements found in CISPR 16-1-1:2010 as well as ANSI C63.2 into one standard for the purpose of providing a harmonized set of specifications such that the same instrument can be used for measurements in accordance with national and international standards.1 Additional requirements have been added to address domestic measurement needs as well as requirements for the frequency range 18 GHz to 40 GHz.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106806 …}
    #channels: Doctrine\ORM\PersistentCollection {#106800 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106804 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106802 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106816 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106823
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1697061600 {#106827
      date: 2023-10-12 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1487545200 {#106781
      date: 2017-02-20 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 17
    -documents: Doctrine\ORM\PersistentCollection {#106813 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106811 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106784
    #id: 10631
    #code: "IEEE00004738"
    #attributes: Doctrine\ORM\PersistentCollection {#106850 …}
    #variants: Doctrine\ORM\PersistentCollection {#106842 …}
    #options: Doctrine\ORM\PersistentCollection {#106847 …}
    #associations: Doctrine\ORM\PersistentCollection {#106848 …}
    #createdAt: DateTime @1751039184 {#106788
      date: 2025-06-27 17:46:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#106787
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106865 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107250
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106784}
        #id: 37533
        #name: "IEEE C63.2:2009"
        #slug: "ieee-c63-2-2009-ieee00004738-242283"
        #description: """
          Revision Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques and requirements for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided in this standard.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106860 …}
    #channels: Doctrine\ORM\PersistentCollection {#106856 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106851 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106857 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106858 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106786
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106785
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1260831600 {#106779
      date: 2009-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 22
    -documents: Doctrine\ORM\PersistentCollection {#106845 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106826 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107265
  +product: App\Entity\Product\Product {#106784
    #id: 10631
    #code: "IEEE00004738"
    #attributes: Doctrine\ORM\PersistentCollection {#106850 …}
    #variants: Doctrine\ORM\PersistentCollection {#106842 …}
    #options: Doctrine\ORM\PersistentCollection {#106847 …}
    #associations: Doctrine\ORM\PersistentCollection {#106848 …}
    #createdAt: DateTime @1751039184 {#106788
      date: 2025-06-27 17:46:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#106787
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106865 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107250
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106784}
        #id: 37533
        #name: "IEEE C63.2:2009"
        #slug: "ieee-c63-2-2009-ieee00004738-242283"
        #description: """
          Revision Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques and requirements for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided in this standard.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106860 …}
    #channels: Doctrine\ORM\PersistentCollection {#106856 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106851 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106857 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106858 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106786
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106785
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1260831600 {#106779
      date: 2009-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 22
    -documents: Doctrine\ORM\PersistentCollection {#106845 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106826 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106784
    #id: 10631
    #code: "IEEE00004738"
    #attributes: Doctrine\ORM\PersistentCollection {#106850 …}
    #variants: Doctrine\ORM\PersistentCollection {#106842 …}
    #options: Doctrine\ORM\PersistentCollection {#106847 …}
    #associations: Doctrine\ORM\PersistentCollection {#106848 …}
    #createdAt: DateTime @1751039184 {#106788
      date: 2025-06-27 17:46:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#106787
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106865 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107250
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106784}
        #id: 37533
        #name: "IEEE C63.2:2009"
        #slug: "ieee-c63-2-2009-ieee00004738-242283"
        #description: """
          Revision Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques and requirements for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided in this standard.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106860 …}
    #channels: Doctrine\ORM\PersistentCollection {#106856 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106851 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106857 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106858 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106786
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106785
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1260831600 {#106779
      date: 2009-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 22
    -documents: Doctrine\ORM\PersistentCollection {#106845 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106826 …}
  }
]

App\Twig\Components\ProductMostRecent {#107317
  +product: App\Entity\Product\Product {#106784
    #id: 10631
    #code: "IEEE00004738"
    #attributes: Doctrine\ORM\PersistentCollection {#106850 …}
    #variants: Doctrine\ORM\PersistentCollection {#106842 …}
    #options: Doctrine\ORM\PersistentCollection {#106847 …}
    #associations: Doctrine\ORM\PersistentCollection {#106848 …}
    #createdAt: DateTime @1751039184 {#106788
      date: 2025-06-27 17:46:24.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607611 {#106787
      date: 2025-08-08 01:00:11.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106865 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107250
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106784}
        #id: 37533
        #name: "IEEE C63.2:2009"
        #slug: "ieee-c63-2-2009-ieee00004738-242283"
        #description: """
          Revision Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques and requirements for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided in this standard.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106860 …}
    #channels: Doctrine\ORM\PersistentCollection {#106856 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106851 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106857 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106858 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106786
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106785
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1260831600 {#106779
      date: 2009-12-15 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 22
    -documents: Doctrine\ORM\PersistentCollection {#106845 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106826 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 9775
    #code: "IEEE00002887"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038547 {#7274
      date: 2025-06-27 17:35:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 34109
        #name: "IEEE/ANSI C63.2:1996"
        #slug: "ieee-ansi-c63-2-1996-ieee00002887-241427"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 Hz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE — Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sinewaves, and components of electric and electromagnetic disturbances, including transients that may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter (FSVM). With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comité International Special des Perturbations Radioélectriques (International Special Committee on Radio Interference) (CISPR) [see CISPR Publication 16 (1987)]. An optional discharge time constant is also specified.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is required to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities. Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not within the scope of the present standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed supplement to this standard. However, a measuring set configured around a spectrum analyzer that meets the requirements of this standard may be used. For measurements made on paired telecommunications lines, refer to IEEE Std 743-1984. Instrumentation specifications for measurement of telecommunications terminal equipment for compliance to technical standards of regulatory authorities are under consideration.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @826585200 {#7318
      date: 1996-03-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107381
  +product: App\Entity\Product\Product {#7310
    #id: 9775
    #code: "IEEE00002887"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038547 {#7274
      date: 2025-06-27 17:35:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 34109
        #name: "IEEE/ANSI C63.2:1996"
        #slug: "ieee-ansi-c63-2-1996-ieee00002887-241427"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 Hz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE — Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sinewaves, and components of electric and electromagnetic disturbances, including transients that may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter (FSVM). With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comité International Special des Perturbations Radioélectriques (International Special Committee on Radio Interference) (CISPR) [see CISPR Publication 16 (1987)]. An optional discharge time constant is also specified.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is required to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities. Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not within the scope of the present standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed supplement to this standard. However, a measuring set configured around a spectrum analyzer that meets the requirements of this standard may be used. For measurements made on paired telecommunications lines, refer to IEEE Std 743-1984. Instrumentation specifications for measurement of telecommunications terminal equipment for compliance to technical standards of regulatory authorities are under consideration.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @826585200 {#7318
      date: 1996-03-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7310
    #id: 9775
    #code: "IEEE00002887"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038547 {#7274
      date: 2025-06-27 17:35:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 34109
        #name: "IEEE/ANSI C63.2:1996"
        #slug: "ieee-ansi-c63-2-1996-ieee00002887-241427"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 Hz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE — Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sinewaves, and components of electric and electromagnetic disturbances, including transients that may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter (FSVM). With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comité International Special des Perturbations Radioélectriques (International Special Committee on Radio Interference) (CISPR) [see CISPR Publication 16 (1987)]. An optional discharge time constant is also specified.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is required to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities. Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not within the scope of the present standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed supplement to this standard. However, a measuring set configured around a spectrum analyzer that meets the requirements of this standard may be used. For measurements made on paired telecommunications lines, refer to IEEE Std 743-1984. Instrumentation specifications for measurement of telecommunications terminal equipment for compliance to technical standards of regulatory authorities are under consideration.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @826585200 {#7318
      date: 1996-03-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]

App\Twig\Components\ProductMostRecent {#107408
  +product: App\Entity\Product\Product {#7310
    #id: 9775
    #code: "IEEE00002887"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1751038547 {#7274
      date: 2025-06-27 17:35:47.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 34109
        #name: "IEEE/ANSI C63.2:1996"
        #slug: "ieee-ansi-c63-2-1996-ieee00002887-241427"
        #description: """
          New IEEE Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques for instruments measuring quasi-peak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 Hz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE — Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sinewaves, and components of electric and electromagnetic disturbances, including transients that may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter (FSVM). With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comité International Special des Perturbations Radioélectriques (International Special Committee on Radio Interference) (CISPR) [see CISPR Publication 16 (1987)]. An optional discharge time constant is also specified.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is required to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities. Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not within the scope of the present standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed supplement to this standard. However, a measuring set configured around a spectrum analyzer that meets the requirements of this standard may be used. For measurements made on paired telecommunications lines, refer to IEEE Std 743-1984. Instrumentation specifications for measurement of telecommunications terminal equipment for compliance to technical standards of regulatory authorities are under consideration.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @826585200 {#7318
      date: 1996-03-12 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 32
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106837
    #id: 9774
    #code: "IEEE00002886"
    #attributes: Doctrine\ORM\PersistentCollection {#106876 …}
    #variants: Doctrine\ORM\PersistentCollection {#106878 …}
    #options: Doctrine\ORM\PersistentCollection {#106882 …}
    #associations: Doctrine\ORM\PersistentCollection {#106880 …}
    #createdAt: DateTime @1751038546 {#106833
      date: 2025-06-27 17:35:46.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106840
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106862 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107474
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106837}
        #id: 34105
        #name: "IEEE/ANSI C63.2:1987"
        #slug: "ieee-ansi-c63-2-1987-ieee00002886-241426"
        #description: """
          Revision Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques and requirements for instruments measuring quasipeak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the<br />\n
          frequency range of 10 kHz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE: Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sine waves, and components of electric and electromagnetic disturbances, including transients which may interfere with the operation of communication, electric, or electronic equipment.<br />\n
          The basic instrument is a frequency-selective voltmeter. With appropriate coupling devices,<br />\n
          such as antennas and current probes, the instrumentation will also measure other physical<br />\n
          quantities such as field strength and current.<br />\n
          The parameters for the quasi-peak detector are specified to agree with the requirements of<br />\n
          the &quot;Comite International Special des Perturbations Radioelectriques&quot; (International Special<br />\n
          Committee on Radio Interference) (CISPR). An optional discharge time constant is specified also.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities.<br />\n
          Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not the purpose of this standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed amendment to C63.2.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Instrumentation - Electromagnetic Noise and Field Strength, 10kHz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106868 …}
    #channels: Doctrine\ORM\PersistentCollection {#106874 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106870 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106872 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106838 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106841
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106822
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @573087600 {#106821
      date: 1988-02-29 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#106832 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106830 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107489
  +product: App\Entity\Product\Product {#106837
    #id: 9774
    #code: "IEEE00002886"
    #attributes: Doctrine\ORM\PersistentCollection {#106876 …}
    #variants: Doctrine\ORM\PersistentCollection {#106878 …}
    #options: Doctrine\ORM\PersistentCollection {#106882 …}
    #associations: Doctrine\ORM\PersistentCollection {#106880 …}
    #createdAt: DateTime @1751038546 {#106833
      date: 2025-06-27 17:35:46.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106840
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106862 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107474
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106837}
        #id: 34105
        #name: "IEEE/ANSI C63.2:1987"
        #slug: "ieee-ansi-c63-2-1987-ieee00002886-241426"
        #description: """
          Revision Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques and requirements for instruments measuring quasipeak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the<br />\n
          frequency range of 10 kHz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE: Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sine waves, and components of electric and electromagnetic disturbances, including transients which may interfere with the operation of communication, electric, or electronic equipment.<br />\n
          The basic instrument is a frequency-selective voltmeter. With appropriate coupling devices,<br />\n
          such as antennas and current probes, the instrumentation will also measure other physical<br />\n
          quantities such as field strength and current.<br />\n
          The parameters for the quasi-peak detector are specified to agree with the requirements of<br />\n
          the &quot;Comite International Special des Perturbations Radioelectriques&quot; (International Special<br />\n
          Committee on Radio Interference) (CISPR). An optional discharge time constant is specified also.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities.<br />\n
          Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not the purpose of this standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed amendment to C63.2.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Instrumentation - Electromagnetic Noise and Field Strength, 10kHz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106868 …}
    #channels: Doctrine\ORM\PersistentCollection {#106874 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106870 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106872 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106838 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106841
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106822
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @573087600 {#106821
      date: 1988-02-29 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#106832 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106830 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106837
    #id: 9774
    #code: "IEEE00002886"
    #attributes: Doctrine\ORM\PersistentCollection {#106876 …}
    #variants: Doctrine\ORM\PersistentCollection {#106878 …}
    #options: Doctrine\ORM\PersistentCollection {#106882 …}
    #associations: Doctrine\ORM\PersistentCollection {#106880 …}
    #createdAt: DateTime @1751038546 {#106833
      date: 2025-06-27 17:35:46.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106840
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106862 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107474
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106837}
        #id: 34105
        #name: "IEEE/ANSI C63.2:1987"
        #slug: "ieee-ansi-c63-2-1987-ieee00002886-241426"
        #description: """
          Revision Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques and requirements for instruments measuring quasipeak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the<br />\n
          frequency range of 10 kHz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE: Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sine waves, and components of electric and electromagnetic disturbances, including transients which may interfere with the operation of communication, electric, or electronic equipment.<br />\n
          The basic instrument is a frequency-selective voltmeter. With appropriate coupling devices,<br />\n
          such as antennas and current probes, the instrumentation will also measure other physical<br />\n
          quantities such as field strength and current.<br />\n
          The parameters for the quasi-peak detector are specified to agree with the requirements of<br />\n
          the &quot;Comite International Special des Perturbations Radioelectriques&quot; (International Special<br />\n
          Committee on Radio Interference) (CISPR). An optional discharge time constant is specified also.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities.<br />\n
          Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not the purpose of this standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed amendment to C63.2.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Instrumentation - Electromagnetic Noise and Field Strength, 10kHz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106868 …}
    #channels: Doctrine\ORM\PersistentCollection {#106874 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106870 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106872 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106838 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106841
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106822
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @573087600 {#106821
      date: 1988-02-29 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#106832 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106830 …}
  }
]

App\Twig\Components\ProductMostRecent {#107541
  +product: App\Entity\Product\Product {#106837
    #id: 9774
    #code: "IEEE00002886"
    #attributes: Doctrine\ORM\PersistentCollection {#106876 …}
    #variants: Doctrine\ORM\PersistentCollection {#106878 …}
    #options: Doctrine\ORM\PersistentCollection {#106882 …}
    #associations: Doctrine\ORM\PersistentCollection {#106880 …}
    #createdAt: DateTime @1751038546 {#106833
      date: 2025-06-27 17:35:46.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106840
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106862 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107474
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106837}
        #id: 34105
        #name: "IEEE/ANSI C63.2:1987"
        #slug: "ieee-ansi-c63-2-1987-ieee00002886-241426"
        #description: """
          Revision Standard - Superseded.<br />\n
          Electromagnetic compatibility techniques and requirements for instruments measuring quasipeak, peak, rms, and average values for electrical and electronic equipment for various applications are provided.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the<br />\n
          frequency range of 10 kHz to 40 GHz incorporating quasi-peak, peak, rms and average detectors.<br />\n
          NOTE: Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sine waves, and components of electric and electromagnetic disturbances, including transients which may interfere with the operation of communication, electric, or electronic equipment.<br />\n
          The basic instrument is a frequency-selective voltmeter. With appropriate coupling devices,<br />\n
          such as antennas and current probes, the instrumentation will also measure other physical<br />\n
          quantities such as field strength and current.<br />\n
          The parameters for the quasi-peak detector are specified to agree with the requirements of<br />\n
          the &quot;Comite International Special des Perturbations Radioelectriques&quot; (International Special<br />\n
          Committee on Radio Interference) (CISPR). An optional discharge time constant is specified also.<br />\n
          The requirements of this specification should not be construed to imply that one instrument is to cover the entire frequency range or that the instrument is permitted to have only the specified detector or detectors. Many users have measurement requirements over a smaller frequency range or may require additional detection capabilities.<br />\n
          Although spectrum analyzers are frequently used in electromagnetic-noise measurements, it is not the purpose of this standard to cover such instruments. A separate document covering spectrum analyzers for use from 20 Hz to 40 GHz is in preparation as a proposed amendment to C63.2.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Instrumentation - Electromagnetic Noise and Field Strength, 10kHz to 40 GHz - Specifications"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106868 …}
    #channels: Doctrine\ORM\PersistentCollection {#106874 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106870 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106872 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106838 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106841
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106822
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @573087600 {#106821
      date: 1988-02-29 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#106832 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106830 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106889
    #id: 11814
    #code: "IEEE00006599"
    #attributes: Doctrine\ORM\PersistentCollection {#106906 …}
    #variants: Doctrine\ORM\PersistentCollection {#106908 …}
    #options: Doctrine\ORM\PersistentCollection {#106912 …}
    #associations: Doctrine\ORM\PersistentCollection {#106910 …}
    #createdAt: DateTime @1751040006 {#106884
      date: 2025-06-27 18:00:06.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#106885
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106896 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107607
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106889}
        #id: 42265
        #name: "ANSI/IEEE C63.2:1980"
        #slug: "ansi-ieee-c63-2-1980-ieee00006599-243466"
        #description: """
           - Superseded.<br />\n
          The increasing significance of electromagnetic compatibility considerations in the design and application of electrical and electronic equipment is directly related to the expanding sophistication of the functions performed by such equipment in industrial, civilian, and military activities. In order to enable the designer and user to be assured that equipment of concern to them will function in the intended application, it is necessary to control the electromagnetic environment adequately. The environment will vary from one application to another, as will the performance requirements. For this reason a variety of electromagnetic compatibility techniques and instruments are necessary. This specification describes requirements for instruments measuring quasi-peak, peak, rms and average values. To determine which of these need be included in any one instrument will depend upon the application.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 kHz to 1000 MHz incorporating quasi-peak, peak, rms and average detectors. NOTE: Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sine waves, and components of electric and electromagnetic disturbances, including transients which may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter. With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comite International Special des Perturbations Radioelectriques (International<br />\n
          Special Committee on Radio Interference) (CISPR). An optional discharge time constant is specified also.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Specifications for Electromagnetic Noise and Field Strength Instrumentation, 10 kHz to 1 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106898 …}
    #channels: Doctrine\ORM\PersistentCollection {#106904 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106900 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106902 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106890 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106886
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1583449200 {#106887
      date: 2020-03-06 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @329522400 {#106888
      date: 1980-06-11 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#106892 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106894 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107622
  +product: App\Entity\Product\Product {#106889
    #id: 11814
    #code: "IEEE00006599"
    #attributes: Doctrine\ORM\PersistentCollection {#106906 …}
    #variants: Doctrine\ORM\PersistentCollection {#106908 …}
    #options: Doctrine\ORM\PersistentCollection {#106912 …}
    #associations: Doctrine\ORM\PersistentCollection {#106910 …}
    #createdAt: DateTime @1751040006 {#106884
      date: 2025-06-27 18:00:06.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#106885
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106896 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107607
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106889}
        #id: 42265
        #name: "ANSI/IEEE C63.2:1980"
        #slug: "ansi-ieee-c63-2-1980-ieee00006599-243466"
        #description: """
           - Superseded.<br />\n
          The increasing significance of electromagnetic compatibility considerations in the design and application of electrical and electronic equipment is directly related to the expanding sophistication of the functions performed by such equipment in industrial, civilian, and military activities. In order to enable the designer and user to be assured that equipment of concern to them will function in the intended application, it is necessary to control the electromagnetic environment adequately. The environment will vary from one application to another, as will the performance requirements. For this reason a variety of electromagnetic compatibility techniques and instruments are necessary. This specification describes requirements for instruments measuring quasi-peak, peak, rms and average values. To determine which of these need be included in any one instrument will depend upon the application.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 kHz to 1000 MHz incorporating quasi-peak, peak, rms and average detectors. NOTE: Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sine waves, and components of electric and electromagnetic disturbances, including transients which may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter. With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comite International Special des Perturbations Radioelectriques (International<br />\n
          Special Committee on Radio Interference) (CISPR). An optional discharge time constant is specified also.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Specifications for Electromagnetic Noise and Field Strength Instrumentation, 10 kHz to 1 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106898 …}
    #channels: Doctrine\ORM\PersistentCollection {#106904 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106900 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106902 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106890 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106886
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1583449200 {#106887
      date: 2020-03-06 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @329522400 {#106888
      date: 1980-06-11 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#106892 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106894 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106889
    #id: 11814
    #code: "IEEE00006599"
    #attributes: Doctrine\ORM\PersistentCollection {#106906 …}
    #variants: Doctrine\ORM\PersistentCollection {#106908 …}
    #options: Doctrine\ORM\PersistentCollection {#106912 …}
    #associations: Doctrine\ORM\PersistentCollection {#106910 …}
    #createdAt: DateTime @1751040006 {#106884
      date: 2025-06-27 18:00:06.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#106885
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106896 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107607
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106889}
        #id: 42265
        #name: "ANSI/IEEE C63.2:1980"
        #slug: "ansi-ieee-c63-2-1980-ieee00006599-243466"
        #description: """
           - Superseded.<br />\n
          The increasing significance of electromagnetic compatibility considerations in the design and application of electrical and electronic equipment is directly related to the expanding sophistication of the functions performed by such equipment in industrial, civilian, and military activities. In order to enable the designer and user to be assured that equipment of concern to them will function in the intended application, it is necessary to control the electromagnetic environment adequately. The environment will vary from one application to another, as will the performance requirements. For this reason a variety of electromagnetic compatibility techniques and instruments are necessary. This specification describes requirements for instruments measuring quasi-peak, peak, rms and average values. To determine which of these need be included in any one instrument will depend upon the application.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 kHz to 1000 MHz incorporating quasi-peak, peak, rms and average detectors. NOTE: Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sine waves, and components of electric and electromagnetic disturbances, including transients which may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter. With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comite International Special des Perturbations Radioelectriques (International<br />\n
          Special Committee on Radio Interference) (CISPR). An optional discharge time constant is specified also.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Specifications for Electromagnetic Noise and Field Strength Instrumentation, 10 kHz to 1 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106898 …}
    #channels: Doctrine\ORM\PersistentCollection {#106904 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106900 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106902 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106890 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106886
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1583449200 {#106887
      date: 2020-03-06 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @329522400 {#106888
      date: 1980-06-11 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#106892 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106894 …}
  }
]

App\Twig\Components\ProductMostRecent {#107674
  +product: App\Entity\Product\Product {#106889
    #id: 11814
    #code: "IEEE00006599"
    #attributes: Doctrine\ORM\PersistentCollection {#106906 …}
    #variants: Doctrine\ORM\PersistentCollection {#106908 …}
    #options: Doctrine\ORM\PersistentCollection {#106912 …}
    #associations: Doctrine\ORM\PersistentCollection {#106910 …}
    #createdAt: DateTime @1751040006 {#106884
      date: 2025-06-27 18:00:06.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#106885
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106896 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107607
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106889}
        #id: 42265
        #name: "ANSI/IEEE C63.2:1980"
        #slug: "ansi-ieee-c63-2-1980-ieee00006599-243466"
        #description: """
           - Superseded.<br />\n
          The increasing significance of electromagnetic compatibility considerations in the design and application of electrical and electronic equipment is directly related to the expanding sophistication of the functions performed by such equipment in industrial, civilian, and military activities. In order to enable the designer and user to be assured that equipment of concern to them will function in the intended application, it is necessary to control the electromagnetic environment adequately. The environment will vary from one application to another, as will the performance requirements. For this reason a variety of electromagnetic compatibility techniques and instruments are necessary. This specification describes requirements for instruments measuring quasi-peak, peak, rms and average values. To determine which of these need be included in any one instrument will depend upon the application.<br />\n
          \t\t\t\t<br />\n
          This standard delineates the requirements of electromagnetic noise instrumentation for the frequency range of 10 kHz to 1000 MHz incorporating quasi-peak, peak, rms and average detectors. NOTE: Examples of the types of voltages, currents, and fields to be measured are unmodulated and modulated sine waves, and components of electric and electromagnetic disturbances, including transients which may interfere with the operation of communication, electric, or electronic equipment. The basic instrument is a frequency-selective voltmeter. With appropriate coupling devices, such as antennas and current probes, the instrumentation will also measure other physical quantities such as field strength and current. The parameters for the quasi-peak detector are specified to agree with the requirements of the Comite International Special des Perturbations Radioelectriques (International<br />\n
          Special Committee on Radio Interference) (CISPR). An optional discharge time constant is specified also.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard Specifications for Electromagnetic Noise and Field Strength Instrumentation, 10 kHz to 1 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106898 …}
    #channels: Doctrine\ORM\PersistentCollection {#106904 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106900 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106902 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106890 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106886
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1583449200 {#106887
      date: 2020-03-06 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @329522400 {#106888
      date: 1980-06-11 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.2"
    -bookCollection: ""
    -pageCount: 24
    -documents: Doctrine\ORM\PersistentCollection {#106892 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106894 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#129150
    #id: 9778
    #code: "IEEE00002890"
    #attributes: Doctrine\ORM\PersistentCollection {#129174 …}
    #variants: Doctrine\ORM\PersistentCollection {#129172 …}
    #options: Doctrine\ORM\PersistentCollection {#129167 …}
    #associations: Doctrine\ORM\PersistentCollection {#129170 …}
    #createdAt: DateTime @1751038549 {#129163
      date: 2025-06-27 17:35:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#129156
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#129185 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#129274
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#129150}
        #id: 34121
        #name: "IEEE/ANSI C63.4:1992"
        #slug: "ieee-ansi-c63-4-1992-ieee00002890-241430"
        #description: """
          Revision Standard - Superseded.<br />\n
          Uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment, in the frequency range of 9 kHz to 40 GHz are set forth. Both unintentional and certain intentional radiators are included. Methods for the measurement of radiated and powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and ac powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain devices that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment. These methods apply to the measurement of individual units or systems comprised of multiple units. Additional methods may be added to this standard to fulfilll future requirements as needed. The methods used for validation of test sites, such as open area sites and absorber-lined rooms for frequencies in the range of 30 to 1000 MHz, are contained in this standard. Further work on absorber-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect internationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#129183 …}
    #channels: Doctrine\ORM\PersistentCollection {#129176 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#129180 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#129178 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#129190 …}
    -apiLastModifiedAt: DateTime @1754517600 {#129149
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#129198
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @711324000 {#129169
      date: 1992-07-17 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#129189 …}
    -favorites: Doctrine\ORM\PersistentCollection {#129187 …}
  }
  "layout" => "vertical"
  "showPrice" => true
  "showStatusBadges" => true
  "additionalClasses" => "product__teaser--with-grey-border"
  "hasStretchedLink" => true
  "hoverType" => "shadow"
  "linkLabel" => "See more"
]

App\Twig\Components\ProductCard {#129242
  +product: App\Entity\Product\Product {#129150
    #id: 9778
    #code: "IEEE00002890"
    #attributes: Doctrine\ORM\PersistentCollection {#129174 …}
    #variants: Doctrine\ORM\PersistentCollection {#129172 …}
    #options: Doctrine\ORM\PersistentCollection {#129167 …}
    #associations: Doctrine\ORM\PersistentCollection {#129170 …}
    #createdAt: DateTime @1751038549 {#129163
      date: 2025-06-27 17:35:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#129156
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#129185 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#129274
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#129150}
        #id: 34121
        #name: "IEEE/ANSI C63.4:1992"
        #slug: "ieee-ansi-c63-4-1992-ieee00002890-241430"
        #description: """
          Revision Standard - Superseded.<br />\n
          Uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment, in the frequency range of 9 kHz to 40 GHz are set forth. Both unintentional and certain intentional radiators are included. Methods for the measurement of radiated and powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and ac powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain devices that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment. These methods apply to the measurement of individual units or systems comprised of multiple units. Additional methods may be added to this standard to fulfilll future requirements as needed. The methods used for validation of test sites, such as open area sites and absorber-lined rooms for frequencies in the range of 30 to 1000 MHz, are contained in this standard. Further work on absorber-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect internationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#129183 …}
    #channels: Doctrine\ORM\PersistentCollection {#129176 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#129180 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#129178 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#129190 …}
    -apiLastModifiedAt: DateTime @1754517600 {#129149
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#129198
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @711324000 {#129169
      date: 1992-07-17 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#129189 …}
    -favorites: Doctrine\ORM\PersistentCollection {#129187 …}
  }
  +layout: "vertical"
  +showPrice: true
  +showStatusBadges: true
  +additionalClasses: "product__teaser--with-grey-border"
  +linkLabel: "See more"
  +imageFilter: "product_thumbnail_teaser"
  +hasStretchedLink: true
  +backgroundColor: "white"
  +hoverType: "shadow"
}

[
  "product" => App\Entity\Product\Product {#129150
    #id: 9778
    #code: "IEEE00002890"
    #attributes: Doctrine\ORM\PersistentCollection {#129174 …}
    #variants: Doctrine\ORM\PersistentCollection {#129172 …}
    #options: Doctrine\ORM\PersistentCollection {#129167 …}
    #associations: Doctrine\ORM\PersistentCollection {#129170 …}
    #createdAt: DateTime @1751038549 {#129163
      date: 2025-06-27 17:35:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#129156
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#129185 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#129274
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#129150}
        #id: 34121
        #name: "IEEE/ANSI C63.4:1992"
        #slug: "ieee-ansi-c63-4-1992-ieee00002890-241430"
        #description: """
          Revision Standard - Superseded.<br />\n
          Uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment, in the frequency range of 9 kHz to 40 GHz are set forth. Both unintentional and certain intentional radiators are included. Methods for the measurement of radiated and powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and ac powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain devices that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment. These methods apply to the measurement of individual units or systems comprised of multiple units. Additional methods may be added to this standard to fulfilll future requirements as needed. The methods used for validation of test sites, such as open area sites and absorber-lined rooms for frequencies in the range of 30 to 1000 MHz, are contained in this standard. Further work on absorber-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect internationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#129183 …}
    #channels: Doctrine\ORM\PersistentCollection {#129176 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#129180 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#129178 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#129190 …}
    -apiLastModifiedAt: DateTime @1754517600 {#129149
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#129198
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @711324000 {#129169
      date: 1992-07-17 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#129189 …}
    -favorites: Doctrine\ORM\PersistentCollection {#129187 …}
  }
]

[
  "showFullLabel" => false
]

App\Twig\Components\ProductState {#129278
  +product: App\Entity\Product\Product {#129150
    #id: 9778
    #code: "IEEE00002890"
    #attributes: Doctrine\ORM\PersistentCollection {#129174 …}
    #variants: Doctrine\ORM\PersistentCollection {#129172 …}
    #options: Doctrine\ORM\PersistentCollection {#129167 …}
    #associations: Doctrine\ORM\PersistentCollection {#129170 …}
    #createdAt: DateTime @1751038549 {#129163
      date: 2025-06-27 17:35:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#129156
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#129185 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#129274
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#129150}
        #id: 34121
        #name: "IEEE/ANSI C63.4:1992"
        #slug: "ieee-ansi-c63-4-1992-ieee00002890-241430"
        #description: """
          Revision Standard - Superseded.<br />\n
          Uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment, in the frequency range of 9 kHz to 40 GHz are set forth. Both unintentional and certain intentional radiators are included. Methods for the measurement of radiated and powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and ac powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain devices that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment. These methods apply to the measurement of individual units or systems comprised of multiple units. Additional methods may be added to this standard to fulfilll future requirements as needed. The methods used for validation of test sites, such as open area sites and absorber-lined rooms for frequencies in the range of 30 to 1000 MHz, are contained in this standard. Further work on absorber-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect internationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#129183 …}
    #channels: Doctrine\ORM\PersistentCollection {#129176 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#129180 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#129178 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#129190 …}
    -apiLastModifiedAt: DateTime @1754517600 {#129149
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#129198
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @711324000 {#129169
      date: 1992-07-17 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#129189 …}
    -favorites: Doctrine\ORM\PersistentCollection {#129187 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}