Symfony Profiler

[
  "product" => App\Entity\Product\Product {#7311
    #id: 9777
    #code: "IEEE00002889"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038548 {#7274
      date: 2025-06-27 17:35:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34117
        #name: "IEEE/ANSI C63.4:2000"
        #slug: "ieee-ansi-c63-4-2000-ieee00002889-241429"
        #description: """
          New IEEE Standard - Active.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment UTE), in the frequency range of 9 kHz to 40 GHz. Methods for the measurement of radiated and power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          These methods are not currently intended for measurement of deliberately radiated energy, such as that from intentional emitters, nor is this standard intended for certification/approval of avionic equipment, except where specifically referenced. Methods of measurement of various types of intentional emitters are under consideration. These methods apply to the measurement of individual units or systems comprised of units. Additional methods may be added to this standard to fulfill future requirements as needed. The methods used for validation of test sites such as open area sites and absorbed-lined rooms for frequencies in the range of 30-1000 MHz are contained in this standard. Further work on absorbed-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect nternationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Interim Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @669510000 {#7318
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @669510000 {#7316
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 140
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#93008
  +product: App\Entity\Product\Product {#7311
    #id: 9777
    #code: "IEEE00002889"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038548 {#7274
      date: 2025-06-27 17:35:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34117
        #name: "IEEE/ANSI C63.4:2000"
        #slug: "ieee-ansi-c63-4-2000-ieee00002889-241429"
        #description: """
          New IEEE Standard - Active.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment UTE), in the frequency range of 9 kHz to 40 GHz. Methods for the measurement of radiated and power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          These methods are not currently intended for measurement of deliberately radiated energy, such as that from intentional emitters, nor is this standard intended for certification/approval of avionic equipment, except where specifically referenced. Methods of measurement of various types of intentional emitters are under consideration. These methods apply to the measurement of individual units or systems comprised of units. Additional methods may be added to this standard to fulfill future requirements as needed. The methods used for validation of test sites such as open area sites and absorbed-lined rooms for frequencies in the range of 30-1000 MHz are contained in this standard. Further work on absorbed-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect nternationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Interim Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @669510000 {#7318
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @669510000 {#7316
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 140
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7311
    #id: 9777
    #code: "IEEE00002889"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038548 {#7274
      date: 2025-06-27 17:35:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34117
        #name: "IEEE/ANSI C63.4:2000"
        #slug: "ieee-ansi-c63-4-2000-ieee00002889-241429"
        #description: """
          New IEEE Standard - Active.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment UTE), in the frequency range of 9 kHz to 40 GHz. Methods for the measurement of radiated and power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          These methods are not currently intended for measurement of deliberately radiated energy, such as that from intentional emitters, nor is this standard intended for certification/approval of avionic equipment, except where specifically referenced. Methods of measurement of various types of intentional emitters are under consideration. These methods apply to the measurement of individual units or systems comprised of units. Additional methods may be added to this standard to fulfill future requirements as needed. The methods used for validation of test sites such as open area sites and absorbed-lined rooms for frequencies in the range of 30-1000 MHz are contained in this standard. Further work on absorbed-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect nternationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Interim Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @669510000 {#7318
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @669510000 {#7316
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 140
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]

App\Twig\Components\ProductType {#93188
  +product: App\Entity\Product\Product {#7311
    #id: 9777
    #code: "IEEE00002889"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038548 {#7274
      date: 2025-06-27 17:35:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34117
        #name: "IEEE/ANSI C63.4:2000"
        #slug: "ieee-ansi-c63-4-2000-ieee00002889-241429"
        #description: """
          New IEEE Standard - Active.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment UTE), in the frequency range of 9 kHz to 40 GHz. Methods for the measurement of radiated and power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          These methods are not currently intended for measurement of deliberately radiated energy, such as that from intentional emitters, nor is this standard intended for certification/approval of avionic equipment, except where specifically referenced. Methods of measurement of various types of intentional emitters are under consideration. These methods apply to the measurement of individual units or systems comprised of units. Additional methods may be added to this standard to fulfill future requirements as needed. The methods used for validation of test sites such as open area sites and absorbed-lined rooms for frequencies in the range of 30-1000 MHz are contained in this standard. Further work on absorbed-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect nternationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Interim Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @669510000 {#7318
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @669510000 {#7316
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 140
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Standard"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7311
    #id: 9777
    #code: "IEEE00002889"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038548 {#7274
      date: 2025-06-27 17:35:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34117
        #name: "IEEE/ANSI C63.4:2000"
        #slug: "ieee-ansi-c63-4-2000-ieee00002889-241429"
        #description: """
          New IEEE Standard - Active.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment UTE), in the frequency range of 9 kHz to 40 GHz. Methods for the measurement of radiated and power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          These methods are not currently intended for measurement of deliberately radiated energy, such as that from intentional emitters, nor is this standard intended for certification/approval of avionic equipment, except where specifically referenced. Methods of measurement of various types of intentional emitters are under consideration. These methods apply to the measurement of individual units or systems comprised of units. Additional methods may be added to this standard to fulfill future requirements as needed. The methods used for validation of test sites such as open area sites and absorbed-lined rooms for frequencies in the range of 30-1000 MHz are contained in this standard. Further work on absorbed-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect nternationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Interim Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @669510000 {#7318
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @669510000 {#7316
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 140
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]

App\Twig\Components\ProductMostRecent {#93263
  +product: App\Entity\Product\Product {#7311
    #id: 9777
    #code: "IEEE00002889"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038548 {#7274
      date: 2025-06-27 17:35:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34117
        #name: "IEEE/ANSI C63.4:2000"
        #slug: "ieee-ansi-c63-4-2000-ieee00002889-241429"
        #description: """
          New IEEE Standard - Active.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment UTE), in the frequency range of 9 kHz to 40 GHz. Methods for the measurement of radiated and power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          These methods are not currently intended for measurement of deliberately radiated energy, such as that from intentional emitters, nor is this standard intended for certification/approval of avionic equipment, except where specifically referenced. Methods of measurement of various types of intentional emitters are under consideration. These methods apply to the measurement of individual units or systems comprised of units. Additional methods may be added to this standard to fulfill future requirements as needed. The methods used for validation of test sites such as open area sites and absorbed-lined rooms for frequencies in the range of 30-1000 MHz are contained in this standard. Further work on absorbed-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect nternationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Interim Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @669510000 {#7318
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @669510000 {#7316
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 140
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#93672
    #id: 12119
    #code: "IEEE00007117"
    #attributes: Doctrine\ORM\PersistentCollection {#93654 …}
    #variants: Doctrine\ORM\PersistentCollection {#93651 …}
    #options: Doctrine\ORM\PersistentCollection {#93647 …}
    #associations: Doctrine\ORM\PersistentCollection {#93649 …}
    #createdAt: DateTime @1751040211 {#93680
      date: 2025-06-27 18:03:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93659
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93665 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93700
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93672}
        #id: 43485
        #name: "IEEE/ANSI C63.4a:2017"
        #slug: "ieee-ansi-c63-4a-2017-ieee00007117-243772"
        #description: """
          Amendment Standard - Active.<br />\n
          U.S. consensus standard methods are specified in Annex D of this amendment for validating standard test sites and alternative test sites used for measurement of radiated radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range of 30 MHz to 1 GHz. In addition, various updates are made to equations in 4.5, Annex F, Annex G, and Annex N.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Amendment 1: Test Site Validation"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93663 …}
    #channels: Doctrine\ORM\PersistentCollection {#93656 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93661 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93658 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93673 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93643
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1685656800 {#93679
      date: 2023-06-02 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1507845600 {#93678
      date: 2017-10-13 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 62
    -documents: Doctrine\ORM\PersistentCollection {#93669 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93667 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107080
  +product: App\Entity\Product\Product {#93672
    #id: 12119
    #code: "IEEE00007117"
    #attributes: Doctrine\ORM\PersistentCollection {#93654 …}
    #variants: Doctrine\ORM\PersistentCollection {#93651 …}
    #options: Doctrine\ORM\PersistentCollection {#93647 …}
    #associations: Doctrine\ORM\PersistentCollection {#93649 …}
    #createdAt: DateTime @1751040211 {#93680
      date: 2025-06-27 18:03:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93659
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93665 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93700
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93672}
        #id: 43485
        #name: "IEEE/ANSI C63.4a:2017"
        #slug: "ieee-ansi-c63-4a-2017-ieee00007117-243772"
        #description: """
          Amendment Standard - Active.<br />\n
          U.S. consensus standard methods are specified in Annex D of this amendment for validating standard test sites and alternative test sites used for measurement of radiated radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range of 30 MHz to 1 GHz. In addition, various updates are made to equations in 4.5, Annex F, Annex G, and Annex N.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Amendment 1: Test Site Validation"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93663 …}
    #channels: Doctrine\ORM\PersistentCollection {#93656 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93661 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93658 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93673 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93643
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1685656800 {#93679
      date: 2023-06-02 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1507845600 {#93678
      date: 2017-10-13 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 62
    -documents: Doctrine\ORM\PersistentCollection {#93669 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93667 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#93672
    #id: 12119
    #code: "IEEE00007117"
    #attributes: Doctrine\ORM\PersistentCollection {#93654 …}
    #variants: Doctrine\ORM\PersistentCollection {#93651 …}
    #options: Doctrine\ORM\PersistentCollection {#93647 …}
    #associations: Doctrine\ORM\PersistentCollection {#93649 …}
    #createdAt: DateTime @1751040211 {#93680
      date: 2025-06-27 18:03:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93659
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93665 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93700
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93672}
        #id: 43485
        #name: "IEEE/ANSI C63.4a:2017"
        #slug: "ieee-ansi-c63-4a-2017-ieee00007117-243772"
        #description: """
          Amendment Standard - Active.<br />\n
          U.S. consensus standard methods are specified in Annex D of this amendment for validating standard test sites and alternative test sites used for measurement of radiated radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range of 30 MHz to 1 GHz. In addition, various updates are made to equations in 4.5, Annex F, Annex G, and Annex N.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Amendment 1: Test Site Validation"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93663 …}
    #channels: Doctrine\ORM\PersistentCollection {#93656 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93661 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93658 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93673 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93643
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1685656800 {#93679
      date: 2023-06-02 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1507845600 {#93678
      date: 2017-10-13 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 62
    -documents: Doctrine\ORM\PersistentCollection {#93669 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93667 …}
  }
]

App\Twig\Components\ProductMostRecent {#107147
  +product: App\Entity\Product\Product {#93672
    #id: 12119
    #code: "IEEE00007117"
    #attributes: Doctrine\ORM\PersistentCollection {#93654 …}
    #variants: Doctrine\ORM\PersistentCollection {#93651 …}
    #options: Doctrine\ORM\PersistentCollection {#93647 …}
    #associations: Doctrine\ORM\PersistentCollection {#93649 …}
    #createdAt: DateTime @1751040211 {#93680
      date: 2025-06-27 18:03:31.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754608621 {#93659
      date: 2025-08-08 01:17:01.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#93665 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#93700
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#93672}
        #id: 43485
        #name: "IEEE/ANSI C63.4a:2017"
        #slug: "ieee-ansi-c63-4a-2017-ieee00007117-243772"
        #description: """
          Amendment Standard - Active.<br />\n
          U.S. consensus standard methods are specified in Annex D of this amendment for validating standard test sites and alternative test sites used for measurement of radiated radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range of 30 MHz to 1 GHz. In addition, various updates are made to equations in 4.5, Annex F, Annex G, and Annex N.<br />\n
          \t\t\t\t
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Amendment 1: Test Site Validation"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#93663 …}
    #channels: Doctrine\ORM\PersistentCollection {#93656 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#93661 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#93658 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#93673 …}
    -apiLastModifiedAt: DateTime @1754517600 {#93643
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1685656800 {#93679
      date: 2023-06-02 00:00:00.0 Europe/Paris (+02:00)
    }
    -author: ""
    -publishedAt: DateTime @1507845600 {#93678
      date: 2017-10-13 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 62
    -documents: Doctrine\ORM\PersistentCollection {#93669 …}
    -favorites: Doctrine\ORM\PersistentCollection {#93667 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106800
    #id: 11278
    #code: "IEEE00005841"
    #attributes: Doctrine\ORM\PersistentCollection {#106783 …}
    #variants: Doctrine\ORM\PersistentCollection {#106780 …}
    #options: Doctrine\ORM\PersistentCollection {#106776 …}
    #associations: Doctrine\ORM\PersistentCollection {#106778 …}
    #createdAt: DateTime @1751039603 {#106768
      date: 2025-06-27 17:53:23.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970307 {#106781
      date: 2025-07-31 15:58:27.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106794 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107222
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106800}
        #id: 40121
        #name: "IEEE/ANSI C63.4:2014"
        #slug: "ieee-ansi-c63-4-2014-ieee00005841-242930"
        #description: """
          Revision Standard - Active.<br />\n
          ANSI C63.4, conducted emission testing, conducting ground plane, digital equipment, electric field measurement, line impedance stabilization network, low-voltage electrical equipment, low-voltage electronic equipment, magnetic field measurement, normalized site attenuation, radiated emission testing, radio-noise emissions, radio-noise power, site attenuation, unintentional radiators<br />\n
          \t\t\t\t<br />\n
          This standard specifies consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range of 9 kHz to 40 GHz, as usable, for example, for compliance testing to U.S. (47CFR15) and Canada (ICES-003) regulatory requirements.1 It does not include generic or product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          This document is intended to standardize methods, instrumentation, and facilities used to characterize device emissions with respect to voluntary or regulatory compliance requirements designed to protect authorized communication services. The specified procedures are intended to be applied primarily in controlled laboratory environments, but they may be used for emission measurement of in situ devices where indicated.<br />\n
          This standard may be applied to emission measurement of a variety of electrical and electronic devices, regardless of size and characteristics. The devices may be single, stand-alone units, or multiple, interconnected units.<br />\n
          Notwithstanding other possible uses, this standard is intended to be used for making emission measurements of unintentional radiators (including digital devices and receivers) and for making emission measurements of the digital device portions contained in or used in intentional radiators. See Annex I for guidance on the application of this standard for U.S. and Canadian requirements.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106791 …}
    #channels: Doctrine\ORM\PersistentCollection {#106785 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106789 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106787 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106801 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106808
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106812
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1403215200 {#106766
      date: 2014-06-20 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 170
    -documents: Doctrine\ORM\PersistentCollection {#106798 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106796 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107237
  +product: App\Entity\Product\Product {#106800
    #id: 11278
    #code: "IEEE00005841"
    #attributes: Doctrine\ORM\PersistentCollection {#106783 …}
    #variants: Doctrine\ORM\PersistentCollection {#106780 …}
    #options: Doctrine\ORM\PersistentCollection {#106776 …}
    #associations: Doctrine\ORM\PersistentCollection {#106778 …}
    #createdAt: DateTime @1751039603 {#106768
      date: 2025-06-27 17:53:23.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970307 {#106781
      date: 2025-07-31 15:58:27.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106794 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107222
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106800}
        #id: 40121
        #name: "IEEE/ANSI C63.4:2014"
        #slug: "ieee-ansi-c63-4-2014-ieee00005841-242930"
        #description: """
          Revision Standard - Active.<br />\n
          ANSI C63.4, conducted emission testing, conducting ground plane, digital equipment, electric field measurement, line impedance stabilization network, low-voltage electrical equipment, low-voltage electronic equipment, magnetic field measurement, normalized site attenuation, radiated emission testing, radio-noise emissions, radio-noise power, site attenuation, unintentional radiators<br />\n
          \t\t\t\t<br />\n
          This standard specifies consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range of 9 kHz to 40 GHz, as usable, for example, for compliance testing to U.S. (47CFR15) and Canada (ICES-003) regulatory requirements.1 It does not include generic or product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          This document is intended to standardize methods, instrumentation, and facilities used to characterize device emissions with respect to voluntary or regulatory compliance requirements designed to protect authorized communication services. The specified procedures are intended to be applied primarily in controlled laboratory environments, but they may be used for emission measurement of in situ devices where indicated.<br />\n
          This standard may be applied to emission measurement of a variety of electrical and electronic devices, regardless of size and characteristics. The devices may be single, stand-alone units, or multiple, interconnected units.<br />\n
          Notwithstanding other possible uses, this standard is intended to be used for making emission measurements of unintentional radiators (including digital devices and receivers) and for making emission measurements of the digital device portions contained in or used in intentional radiators. See Annex I for guidance on the application of this standard for U.S. and Canadian requirements.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106791 …}
    #channels: Doctrine\ORM\PersistentCollection {#106785 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106789 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106787 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106801 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106808
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106812
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1403215200 {#106766
      date: 2014-06-20 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 170
    -documents: Doctrine\ORM\PersistentCollection {#106798 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106796 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106800
    #id: 11278
    #code: "IEEE00005841"
    #attributes: Doctrine\ORM\PersistentCollection {#106783 …}
    #variants: Doctrine\ORM\PersistentCollection {#106780 …}
    #options: Doctrine\ORM\PersistentCollection {#106776 …}
    #associations: Doctrine\ORM\PersistentCollection {#106778 …}
    #createdAt: DateTime @1751039603 {#106768
      date: 2025-06-27 17:53:23.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970307 {#106781
      date: 2025-07-31 15:58:27.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106794 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107222
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106800}
        #id: 40121
        #name: "IEEE/ANSI C63.4:2014"
        #slug: "ieee-ansi-c63-4-2014-ieee00005841-242930"
        #description: """
          Revision Standard - Active.<br />\n
          ANSI C63.4, conducted emission testing, conducting ground plane, digital equipment, electric field measurement, line impedance stabilization network, low-voltage electrical equipment, low-voltage electronic equipment, magnetic field measurement, normalized site attenuation, radiated emission testing, radio-noise emissions, radio-noise power, site attenuation, unintentional radiators<br />\n
          \t\t\t\t<br />\n
          This standard specifies consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range of 9 kHz to 40 GHz, as usable, for example, for compliance testing to U.S. (47CFR15) and Canada (ICES-003) regulatory requirements.1 It does not include generic or product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          This document is intended to standardize methods, instrumentation, and facilities used to characterize device emissions with respect to voluntary or regulatory compliance requirements designed to protect authorized communication services. The specified procedures are intended to be applied primarily in controlled laboratory environments, but they may be used for emission measurement of in situ devices where indicated.<br />\n
          This standard may be applied to emission measurement of a variety of electrical and electronic devices, regardless of size and characteristics. The devices may be single, stand-alone units, or multiple, interconnected units.<br />\n
          Notwithstanding other possible uses, this standard is intended to be used for making emission measurements of unintentional radiators (including digital devices and receivers) and for making emission measurements of the digital device portions contained in or used in intentional radiators. See Annex I for guidance on the application of this standard for U.S. and Canadian requirements.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106791 …}
    #channels: Doctrine\ORM\PersistentCollection {#106785 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106789 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106787 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106801 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106808
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106812
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1403215200 {#106766
      date: 2014-06-20 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 170
    -documents: Doctrine\ORM\PersistentCollection {#106798 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106796 …}
  }
]

App\Twig\Components\ProductMostRecent {#107289
  +product: App\Entity\Product\Product {#106800
    #id: 11278
    #code: "IEEE00005841"
    #attributes: Doctrine\ORM\PersistentCollection {#106783 …}
    #variants: Doctrine\ORM\PersistentCollection {#106780 …}
    #options: Doctrine\ORM\PersistentCollection {#106776 …}
    #associations: Doctrine\ORM\PersistentCollection {#106778 …}
    #createdAt: DateTime @1751039603 {#106768
      date: 2025-06-27 17:53:23.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753970307 {#106781
      date: 2025-07-31 15:58:27.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106794 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107222
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106800}
        #id: 40121
        #name: "IEEE/ANSI C63.4:2014"
        #slug: "ieee-ansi-c63-4-2014-ieee00005841-242930"
        #description: """
          Revision Standard - Active.<br />\n
          ANSI C63.4, conducted emission testing, conducting ground plane, digital equipment, electric field measurement, line impedance stabilization network, low-voltage electrical equipment, low-voltage electronic equipment, magnetic field measurement, normalized site attenuation, radiated emission testing, radio-noise emissions, radio-noise power, site attenuation, unintentional radiators<br />\n
          \t\t\t\t<br />\n
          This standard specifies consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range of 9 kHz to 40 GHz, as usable, for example, for compliance testing to U.S. (47CFR15) and Canada (ICES-003) regulatory requirements.1 It does not include generic or product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          This document is intended to standardize methods, instrumentation, and facilities used to characterize device emissions with respect to voluntary or regulatory compliance requirements designed to protect authorized communication services. The specified procedures are intended to be applied primarily in controlled laboratory environments, but they may be used for emission measurement of in situ devices where indicated.<br />\n
          This standard may be applied to emission measurement of a variety of electrical and electronic devices, regardless of size and characteristics. The devices may be single, stand-alone units, or multiple, interconnected units.<br />\n
          Notwithstanding other possible uses, this standard is intended to be used for making emission measurements of unintentional radiators (including digital devices and receivers) and for making emission measurements of the digital device portions contained in or used in intentional radiators. See Annex I for guidance on the application of this standard for U.S. and Canadian requirements.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106791 …}
    #channels: Doctrine\ORM\PersistentCollection {#106785 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106789 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106787 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106801 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106808
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106812
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1403215200 {#106766
      date: 2014-06-20 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 170
    -documents: Doctrine\ORM\PersistentCollection {#106798 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106796 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106769
    #id: 10616
    #code: "IEEE00004712"
    #attributes: Doctrine\ORM\PersistentCollection {#106835 …}
    #variants: Doctrine\ORM\PersistentCollection {#106827 …}
    #options: Doctrine\ORM\PersistentCollection {#106832 …}
    #associations: Doctrine\ORM\PersistentCollection {#106833 …}
    #createdAt: DateTime @1751039176 {#106773
      date: 2025-06-27 17:46:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969918 {#106772
      date: 2025-07-31 15:51:58.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106850 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107355
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106769}
        #id: 37473
        #name: "ANSI C63.4:2009"
        #slug: "ansi-c63-4-2009-ieee00004712-242268"
        #description: """
          Revision Standard - Superseded.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of<br />\n
          radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the<br />\n
          frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor<br />\n
          product-specific emission limits. Where possible, the specifications herein are harmonized with<br />\n
          otherre national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          This document is intended to standardize methods, instrumentation, and facilities used to characterize device emissions with respect to voluntary or regulatory compliance requirements designed to protect authorized communication services. The specified procedures are intended to be applied primarily in controlled laboratory environments, but they may be used for emission measurement of in situ devices where indicated. This standard may be applied to emission measurement of a variety of electrical and electronic devices, regardless of size and characteristics. The devices may be single, stand-alone units, or multiple, interconnected units.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106845 …}
    #channels: Doctrine\ORM\PersistentCollection {#106841 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106836 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106842 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106843 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106771
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106770
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1252965600 {#106764
      date: 2009-09-15 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 155
    -documents: Doctrine\ORM\PersistentCollection {#106830 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106811 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107370
  +product: App\Entity\Product\Product {#106769
    #id: 10616
    #code: "IEEE00004712"
    #attributes: Doctrine\ORM\PersistentCollection {#106835 …}
    #variants: Doctrine\ORM\PersistentCollection {#106827 …}
    #options: Doctrine\ORM\PersistentCollection {#106832 …}
    #associations: Doctrine\ORM\PersistentCollection {#106833 …}
    #createdAt: DateTime @1751039176 {#106773
      date: 2025-06-27 17:46:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969918 {#106772
      date: 2025-07-31 15:51:58.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106850 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107355
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106769}
        #id: 37473
        #name: "ANSI C63.4:2009"
        #slug: "ansi-c63-4-2009-ieee00004712-242268"
        #description: """
          Revision Standard - Superseded.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of<br />\n
          radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the<br />\n
          frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor<br />\n
          product-specific emission limits. Where possible, the specifications herein are harmonized with<br />\n
          otherre national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          This document is intended to standardize methods, instrumentation, and facilities used to characterize device emissions with respect to voluntary or regulatory compliance requirements designed to protect authorized communication services. The specified procedures are intended to be applied primarily in controlled laboratory environments, but they may be used for emission measurement of in situ devices where indicated. This standard may be applied to emission measurement of a variety of electrical and electronic devices, regardless of size and characteristics. The devices may be single, stand-alone units, or multiple, interconnected units.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106845 …}
    #channels: Doctrine\ORM\PersistentCollection {#106841 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106836 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106842 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106843 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106771
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106770
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1252965600 {#106764
      date: 2009-09-15 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 155
    -documents: Doctrine\ORM\PersistentCollection {#106830 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106811 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106769
    #id: 10616
    #code: "IEEE00004712"
    #attributes: Doctrine\ORM\PersistentCollection {#106835 …}
    #variants: Doctrine\ORM\PersistentCollection {#106827 …}
    #options: Doctrine\ORM\PersistentCollection {#106832 …}
    #associations: Doctrine\ORM\PersistentCollection {#106833 …}
    #createdAt: DateTime @1751039176 {#106773
      date: 2025-06-27 17:46:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969918 {#106772
      date: 2025-07-31 15:51:58.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106850 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107355
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106769}
        #id: 37473
        #name: "ANSI C63.4:2009"
        #slug: "ansi-c63-4-2009-ieee00004712-242268"
        #description: """
          Revision Standard - Superseded.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of<br />\n
          radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the<br />\n
          frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor<br />\n
          product-specific emission limits. Where possible, the specifications herein are harmonized with<br />\n
          otherre national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          This document is intended to standardize methods, instrumentation, and facilities used to characterize device emissions with respect to voluntary or regulatory compliance requirements designed to protect authorized communication services. The specified procedures are intended to be applied primarily in controlled laboratory environments, but they may be used for emission measurement of in situ devices where indicated. This standard may be applied to emission measurement of a variety of electrical and electronic devices, regardless of size and characteristics. The devices may be single, stand-alone units, or multiple, interconnected units.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106845 …}
    #channels: Doctrine\ORM\PersistentCollection {#106841 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106836 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106842 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106843 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106771
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106770
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1252965600 {#106764
      date: 2009-09-15 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 155
    -documents: Doctrine\ORM\PersistentCollection {#106830 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106811 …}
  }
]

App\Twig\Components\ProductMostRecent {#107422
  +product: App\Entity\Product\Product {#106769
    #id: 10616
    #code: "IEEE00004712"
    #attributes: Doctrine\ORM\PersistentCollection {#106835 …}
    #variants: Doctrine\ORM\PersistentCollection {#106827 …}
    #options: Doctrine\ORM\PersistentCollection {#106832 …}
    #associations: Doctrine\ORM\PersistentCollection {#106833 …}
    #createdAt: DateTime @1751039176 {#106773
      date: 2025-06-27 17:46:16.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1753969918 {#106772
      date: 2025-07-31 15:51:58.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106850 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107355
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106769}
        #id: 37473
        #name: "ANSI C63.4:2009"
        #slug: "ansi-c63-4-2009-ieee00004712-242268"
        #description: """
          Revision Standard - Superseded.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of<br />\n
          radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the<br />\n
          frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor<br />\n
          product-specific emission limits. Where possible, the specifications herein are harmonized with<br />\n
          otherre national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          This document is intended to standardize methods, instrumentation, and facilities used to characterize device emissions with respect to voluntary or regulatory compliance requirements designed to protect authorized communication services. The specified procedures are intended to be applied primarily in controlled laboratory environments, but they may be used for emission measurement of in situ devices where indicated. This standard may be applied to emission measurement of a variety of electrical and electronic devices, regardless of size and characteristics. The devices may be single, stand-alone units, or multiple, interconnected units.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106845 …}
    #channels: Doctrine\ORM\PersistentCollection {#106841 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106836 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106842 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106843 …}
    -apiLastModifiedAt: DateTime @1743289200 {#106771
      date: 2025-03-30 00:00:00.0 Europe/Paris (+01:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106770
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1252965600 {#106764
      date: 2009-09-15 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 155
    -documents: Doctrine\ORM\PersistentCollection {#106830 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106811 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106822
    #id: 9779
    #code: "IEEE00002891"
    #attributes: Doctrine\ORM\PersistentCollection {#106861 …}
    #variants: Doctrine\ORM\PersistentCollection {#106863 …}
    #options: Doctrine\ORM\PersistentCollection {#106867 …}
    #associations: Doctrine\ORM\PersistentCollection {#106865 …}
    #createdAt: DateTime @1751038550 {#106826
      date: 2025-06-27 17:35:50.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106825
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106847 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107488
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106822}
        #id: 34125
        #name: "IEEE C63.4:2003"
        #slug: "ieee-c63-4-2003-ieee00002891-241431"
        #description: """
          Revision Standard - Superseded.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes. Measurement methods are included for radiated and line-conducted emissions that can be generated by a variety of devices, as described in . Definitions are provided for terms and phrases contained in the text, in which the words do not represent obvious or common usage. Measurement instrumentation, facilities, and test sites are specified and characterized, including Open Area Test Sites (OATS) and RF absorber-lined, metal chambers used for radiated emission measurement. Transverse electromagnetic (TEM) wave devices used for radiated emission measurement are treated in normative Annex . The requirements of Annex , when such tests are performed, shall take precedence in this standard. In most cases, measurement instrumentation and calibration requirements are only generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which also should be used in conjunction with this standard. The main text is augmented by a series of annexes, which provide details for certain measurement methods and facilities, as well as step-by-step procedures for measurement of emissions from specific types of devices. Annex provides an index of main text clauses by device type.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106853 …}
    #channels: Doctrine\ORM\PersistentCollection {#106859 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106855 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106857 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106823 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106818
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106819
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1075158000 {#106824
      date: 2004-01-27 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 143
    -documents: Doctrine\ORM\PersistentCollection {#106817 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106815 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107503
  +product: App\Entity\Product\Product {#106822
    #id: 9779
    #code: "IEEE00002891"
    #attributes: Doctrine\ORM\PersistentCollection {#106861 …}
    #variants: Doctrine\ORM\PersistentCollection {#106863 …}
    #options: Doctrine\ORM\PersistentCollection {#106867 …}
    #associations: Doctrine\ORM\PersistentCollection {#106865 …}
    #createdAt: DateTime @1751038550 {#106826
      date: 2025-06-27 17:35:50.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106825
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106847 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107488
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106822}
        #id: 34125
        #name: "IEEE C63.4:2003"
        #slug: "ieee-c63-4-2003-ieee00002891-241431"
        #description: """
          Revision Standard - Superseded.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes. Measurement methods are included for radiated and line-conducted emissions that can be generated by a variety of devices, as described in . Definitions are provided for terms and phrases contained in the text, in which the words do not represent obvious or common usage. Measurement instrumentation, facilities, and test sites are specified and characterized, including Open Area Test Sites (OATS) and RF absorber-lined, metal chambers used for radiated emission measurement. Transverse electromagnetic (TEM) wave devices used for radiated emission measurement are treated in normative Annex . The requirements of Annex , when such tests are performed, shall take precedence in this standard. In most cases, measurement instrumentation and calibration requirements are only generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which also should be used in conjunction with this standard. The main text is augmented by a series of annexes, which provide details for certain measurement methods and facilities, as well as step-by-step procedures for measurement of emissions from specific types of devices. Annex provides an index of main text clauses by device type.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106853 …}
    #channels: Doctrine\ORM\PersistentCollection {#106859 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106855 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106857 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106823 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106818
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106819
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1075158000 {#106824
      date: 2004-01-27 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 143
    -documents: Doctrine\ORM\PersistentCollection {#106817 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106815 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106822
    #id: 9779
    #code: "IEEE00002891"
    #attributes: Doctrine\ORM\PersistentCollection {#106861 …}
    #variants: Doctrine\ORM\PersistentCollection {#106863 …}
    #options: Doctrine\ORM\PersistentCollection {#106867 …}
    #associations: Doctrine\ORM\PersistentCollection {#106865 …}
    #createdAt: DateTime @1751038550 {#106826
      date: 2025-06-27 17:35:50.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106825
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106847 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107488
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106822}
        #id: 34125
        #name: "IEEE C63.4:2003"
        #slug: "ieee-c63-4-2003-ieee00002891-241431"
        #description: """
          Revision Standard - Superseded.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes. Measurement methods are included for radiated and line-conducted emissions that can be generated by a variety of devices, as described in . Definitions are provided for terms and phrases contained in the text, in which the words do not represent obvious or common usage. Measurement instrumentation, facilities, and test sites are specified and characterized, including Open Area Test Sites (OATS) and RF absorber-lined, metal chambers used for radiated emission measurement. Transverse electromagnetic (TEM) wave devices used for radiated emission measurement are treated in normative Annex . The requirements of Annex , when such tests are performed, shall take precedence in this standard. In most cases, measurement instrumentation and calibration requirements are only generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which also should be used in conjunction with this standard. The main text is augmented by a series of annexes, which provide details for certain measurement methods and facilities, as well as step-by-step procedures for measurement of emissions from specific types of devices. Annex provides an index of main text clauses by device type.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106853 …}
    #channels: Doctrine\ORM\PersistentCollection {#106859 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106855 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106857 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106823 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106818
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106819
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1075158000 {#106824
      date: 2004-01-27 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 143
    -documents: Doctrine\ORM\PersistentCollection {#106817 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106815 …}
  }
]

App\Twig\Components\ProductMostRecent {#107555
  +product: App\Entity\Product\Product {#106822
    #id: 9779
    #code: "IEEE00002891"
    #attributes: Doctrine\ORM\PersistentCollection {#106861 …}
    #variants: Doctrine\ORM\PersistentCollection {#106863 …}
    #options: Doctrine\ORM\PersistentCollection {#106867 …}
    #associations: Doctrine\ORM\PersistentCollection {#106865 …}
    #createdAt: DateTime @1751038550 {#106826
      date: 2025-06-27 17:35:50.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106825
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106847 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107488
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106822}
        #id: 34125
        #name: "IEEE C63.4:2003"
        #slug: "ieee-c63-4-2003-ieee00002891-241431"
        #description: """
          Revision Standard - Superseded.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes. Measurement methods are included for radiated and line-conducted emissions that can be generated by a variety of devices, as described in . Definitions are provided for terms and phrases contained in the text, in which the words do not represent obvious or common usage. Measurement instrumentation, facilities, and test sites are specified and characterized, including Open Area Test Sites (OATS) and RF absorber-lined, metal chambers used for radiated emission measurement. Transverse electromagnetic (TEM) wave devices used for radiated emission measurement are treated in normative Annex . The requirements of Annex , when such tests are performed, shall take precedence in this standard. In most cases, measurement instrumentation and calibration requirements are only generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which also should be used in conjunction with this standard. The main text is augmented by a series of annexes, which provide details for certain measurement methods and facilities, as well as step-by-step procedures for measurement of emissions from specific types of devices. Annex provides an index of main text clauses by device type.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "IEEE Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106853 …}
    #channels: Doctrine\ORM\PersistentCollection {#106859 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106855 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106857 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106823 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106818
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106819
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @1075158000 {#106824
      date: 2004-01-27 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 143
    -documents: Doctrine\ORM\PersistentCollection {#106817 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106815 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106874
    #id: 9887
    #code: "IEEE00003153"
    #attributes: Doctrine\ORM\PersistentCollection {#106891 …}
    #variants: Doctrine\ORM\PersistentCollection {#106893 …}
    #options: Doctrine\ORM\PersistentCollection {#106897 …}
    #associations: Doctrine\ORM\PersistentCollection {#106895 …}
    #createdAt: DateTime @1751038639 {#106869
      date: 2025-06-27 17:37:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106870
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106881 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107621
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106874}
        #id: 34557
        #name: "IEEE/ANSI C63.4:2001"
        #slug: "ieee-ansi-c63-4-2001-ieee00003153-241539"
        #description: """
          Revision Standard - Superseded.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes. Measurement methods are included for radiated and line-conducted emissions that can be generated by a variety of devices, as described in 1.2. Definitions are provided for terms and phrases contained in the text, in which the words do not represent obvious or common usage. Measurement instrumentation, facilities, and test sites are specified and characterized, including Open Area Test Sites (OATS) and RF absorber-lined, metal chambers used for radiated emission measurement. Transverse electromagnetic wave devices used for radiated emission measurement are treated in normative Annex M. The requirements of Annex M, when such tests are performed, shall take precedence in this standard. In most cases, measurement instrumentation and calibration requirements are only generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which also should be used in conjunction with this standard. The main text is augmented by a series of annexes, which provide details for certain measurement methods and facilities, as well as step-by-step procedures for measurement of emissions from specific types of devices. Annex J provides an index of main text clauses by<br />\n
          device type.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106883 …}
    #channels: Doctrine\ORM\PersistentCollection {#106889 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106885 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106887 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106875 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106871
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106872
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @993160800 {#106873
      date: 2001-06-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 132
    -documents: Doctrine\ORM\PersistentCollection {#106877 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106879 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107636
  +product: App\Entity\Product\Product {#106874
    #id: 9887
    #code: "IEEE00003153"
    #attributes: Doctrine\ORM\PersistentCollection {#106891 …}
    #variants: Doctrine\ORM\PersistentCollection {#106893 …}
    #options: Doctrine\ORM\PersistentCollection {#106897 …}
    #associations: Doctrine\ORM\PersistentCollection {#106895 …}
    #createdAt: DateTime @1751038639 {#106869
      date: 2025-06-27 17:37:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106870
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106881 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107621
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106874}
        #id: 34557
        #name: "IEEE/ANSI C63.4:2001"
        #slug: "ieee-ansi-c63-4-2001-ieee00003153-241539"
        #description: """
          Revision Standard - Superseded.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes. Measurement methods are included for radiated and line-conducted emissions that can be generated by a variety of devices, as described in 1.2. Definitions are provided for terms and phrases contained in the text, in which the words do not represent obvious or common usage. Measurement instrumentation, facilities, and test sites are specified and characterized, including Open Area Test Sites (OATS) and RF absorber-lined, metal chambers used for radiated emission measurement. Transverse electromagnetic wave devices used for radiated emission measurement are treated in normative Annex M. The requirements of Annex M, when such tests are performed, shall take precedence in this standard. In most cases, measurement instrumentation and calibration requirements are only generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which also should be used in conjunction with this standard. The main text is augmented by a series of annexes, which provide details for certain measurement methods and facilities, as well as step-by-step procedures for measurement of emissions from specific types of devices. Annex J provides an index of main text clauses by<br />\n
          device type.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106883 …}
    #channels: Doctrine\ORM\PersistentCollection {#106889 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106885 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106887 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106875 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106871
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106872
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @993160800 {#106873
      date: 2001-06-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 132
    -documents: Doctrine\ORM\PersistentCollection {#106877 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106879 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106874
    #id: 9887
    #code: "IEEE00003153"
    #attributes: Doctrine\ORM\PersistentCollection {#106891 …}
    #variants: Doctrine\ORM\PersistentCollection {#106893 …}
    #options: Doctrine\ORM\PersistentCollection {#106897 …}
    #associations: Doctrine\ORM\PersistentCollection {#106895 …}
    #createdAt: DateTime @1751038639 {#106869
      date: 2025-06-27 17:37:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106870
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106881 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107621
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106874}
        #id: 34557
        #name: "IEEE/ANSI C63.4:2001"
        #slug: "ieee-ansi-c63-4-2001-ieee00003153-241539"
        #description: """
          Revision Standard - Superseded.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes. Measurement methods are included for radiated and line-conducted emissions that can be generated by a variety of devices, as described in 1.2. Definitions are provided for terms and phrases contained in the text, in which the words do not represent obvious or common usage. Measurement instrumentation, facilities, and test sites are specified and characterized, including Open Area Test Sites (OATS) and RF absorber-lined, metal chambers used for radiated emission measurement. Transverse electromagnetic wave devices used for radiated emission measurement are treated in normative Annex M. The requirements of Annex M, when such tests are performed, shall take precedence in this standard. In most cases, measurement instrumentation and calibration requirements are only generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which also should be used in conjunction with this standard. The main text is augmented by a series of annexes, which provide details for certain measurement methods and facilities, as well as step-by-step procedures for measurement of emissions from specific types of devices. Annex J provides an index of main text clauses by<br />\n
          device type.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106883 …}
    #channels: Doctrine\ORM\PersistentCollection {#106889 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106885 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106887 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106875 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106871
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106872
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @993160800 {#106873
      date: 2001-06-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 132
    -documents: Doctrine\ORM\PersistentCollection {#106877 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106879 …}
  }
]

App\Twig\Components\ProductMostRecent {#107688
  +product: App\Entity\Product\Product {#106874
    #id: 9887
    #code: "IEEE00003153"
    #attributes: Doctrine\ORM\PersistentCollection {#106891 …}
    #variants: Doctrine\ORM\PersistentCollection {#106893 …}
    #options: Doctrine\ORM\PersistentCollection {#106897 …}
    #associations: Doctrine\ORM\PersistentCollection {#106895 …}
    #createdAt: DateTime @1751038639 {#106869
      date: 2025-06-27 17:37:19.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106870
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106881 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107621
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106874}
        #id: 34557
        #name: "IEEE/ANSI C63.4:2001"
        #slug: "ieee-ansi-c63-4-2001-ieee00003153-241539"
        #description: """
          Revision Standard - Superseded.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard specifies U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz. It does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes. Measurement methods are included for radiated and line-conducted emissions that can be generated by a variety of devices, as described in 1.2. Definitions are provided for terms and phrases contained in the text, in which the words do not represent obvious or common usage. Measurement instrumentation, facilities, and test sites are specified and characterized, including Open Area Test Sites (OATS) and RF absorber-lined, metal chambers used for radiated emission measurement. Transverse electromagnetic wave devices used for radiated emission measurement are treated in normative Annex M. The requirements of Annex M, when such tests are performed, shall take precedence in this standard. In most cases, measurement instrumentation and calibration requirements are only generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which also should be used in conjunction with this standard. The main text is augmented by a series of annexes, which provide details for certain measurement methods and facilities, as well as step-by-step procedures for measurement of emissions from specific types of devices. Annex J provides an index of main text clauses by<br />\n
          device type.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106883 …}
    #channels: Doctrine\ORM\PersistentCollection {#106889 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106885 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106887 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106875 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106871
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106872
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @993160800 {#106873
      date: 2001-06-22 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 132
    -documents: Doctrine\ORM\PersistentCollection {#106877 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106879 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106904
    #id: 9778
    #code: "IEEE00002890"
    #attributes: Doctrine\ORM\PersistentCollection {#106921 …}
    #variants: Doctrine\ORM\PersistentCollection {#106923 …}
    #options: Doctrine\ORM\PersistentCollection {#106927 …}
    #associations: Doctrine\ORM\PersistentCollection {#106925 …}
    #createdAt: DateTime @1751038549 {#106899
      date: 2025-06-27 17:35:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106900
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106911 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107754
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106904}
        #id: 34121
        #name: "IEEE/ANSI C63.4:1992"
        #slug: "ieee-ansi-c63-4-1992-ieee00002890-241430"
        #description: """
          Revision Standard - Superseded.<br />\n
          Uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment, in the frequency range of 9 kHz to 40 GHz are set forth. Both unintentional and certain intentional radiators are included. Methods for the measurement of radiated and powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and ac powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain devices that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment. These methods apply to the measurement of individual units or systems comprised of multiple units. Additional methods may be added to this standard to fulfilll future requirements as needed. The methods used for validation of test sites, such as open area sites and absorber-lined rooms for frequencies in the range of 30 to 1000 MHz, are contained in this standard. Further work on absorber-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect internationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106913 …}
    #channels: Doctrine\ORM\PersistentCollection {#106919 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106915 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106917 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106905 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106901
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106902
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @711324000 {#106903
      date: 1992-07-17 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#106907 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106909 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107769
  +product: App\Entity\Product\Product {#106904
    #id: 9778
    #code: "IEEE00002890"
    #attributes: Doctrine\ORM\PersistentCollection {#106921 …}
    #variants: Doctrine\ORM\PersistentCollection {#106923 …}
    #options: Doctrine\ORM\PersistentCollection {#106927 …}
    #associations: Doctrine\ORM\PersistentCollection {#106925 …}
    #createdAt: DateTime @1751038549 {#106899
      date: 2025-06-27 17:35:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106900
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106911 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107754
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106904}
        #id: 34121
        #name: "IEEE/ANSI C63.4:1992"
        #slug: "ieee-ansi-c63-4-1992-ieee00002890-241430"
        #description: """
          Revision Standard - Superseded.<br />\n
          Uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment, in the frequency range of 9 kHz to 40 GHz are set forth. Both unintentional and certain intentional radiators are included. Methods for the measurement of radiated and powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and ac powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain devices that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment. These methods apply to the measurement of individual units or systems comprised of multiple units. Additional methods may be added to this standard to fulfilll future requirements as needed. The methods used for validation of test sites, such as open area sites and absorber-lined rooms for frequencies in the range of 30 to 1000 MHz, are contained in this standard. Further work on absorber-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect internationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106913 …}
    #channels: Doctrine\ORM\PersistentCollection {#106919 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106915 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106917 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106905 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106901
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106902
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @711324000 {#106903
      date: 1992-07-17 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#106907 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106909 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#106904
    #id: 9778
    #code: "IEEE00002890"
    #attributes: Doctrine\ORM\PersistentCollection {#106921 …}
    #variants: Doctrine\ORM\PersistentCollection {#106923 …}
    #options: Doctrine\ORM\PersistentCollection {#106927 …}
    #associations: Doctrine\ORM\PersistentCollection {#106925 …}
    #createdAt: DateTime @1751038549 {#106899
      date: 2025-06-27 17:35:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106900
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106911 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107754
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106904}
        #id: 34121
        #name: "IEEE/ANSI C63.4:1992"
        #slug: "ieee-ansi-c63-4-1992-ieee00002890-241430"
        #description: """
          Revision Standard - Superseded.<br />\n
          Uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment, in the frequency range of 9 kHz to 40 GHz are set forth. Both unintentional and certain intentional radiators are included. Methods for the measurement of radiated and powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and ac powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain devices that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment. These methods apply to the measurement of individual units or systems comprised of multiple units. Additional methods may be added to this standard to fulfilll future requirements as needed. The methods used for validation of test sites, such as open area sites and absorber-lined rooms for frequencies in the range of 30 to 1000 MHz, are contained in this standard. Further work on absorber-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect internationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106913 …}
    #channels: Doctrine\ORM\PersistentCollection {#106919 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106915 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106917 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106905 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106901
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106902
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @711324000 {#106903
      date: 1992-07-17 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#106907 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106909 …}
  }
]

App\Twig\Components\ProductMostRecent {#107821
  +product: App\Entity\Product\Product {#106904
    #id: 9778
    #code: "IEEE00002890"
    #attributes: Doctrine\ORM\PersistentCollection {#106921 …}
    #variants: Doctrine\ORM\PersistentCollection {#106923 …}
    #options: Doctrine\ORM\PersistentCollection {#106927 …}
    #associations: Doctrine\ORM\PersistentCollection {#106925 …}
    #createdAt: DateTime @1751038549 {#106899
      date: 2025-06-27 17:35:49.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#106900
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#106911 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#107754
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#106904}
        #id: 34121
        #name: "IEEE/ANSI C63.4:1992"
        #slug: "ieee-ansi-c63-4-1992-ieee00002890-241430"
        #description: """
          Revision Standard - Superseded.<br />\n
          Uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment, in the frequency range of 9 kHz to 40 GHz are set forth. Both unintentional and certain intentional radiators are included. Methods for the measurement of radiated and powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio-frequency (RF) signals and noise emitted from both unintentional and intentional emitters of RF energy in the frequency range 9 kHz to 40 GHz. Methods for the measurement of radiated and ac powerline conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements. These methods cover measurement of certain devices that deliberately radiate energy, such as intentional emitters, but does not cover licensed transmitters. This standard is not intended for certification/approval of avionic equipment or for industrial, scientific, and medical (ISM) equipment. These methods apply to the measurement of individual units or systems comprised of multiple units. Additional methods may be added to this standard to fulfilll future requirements as needed. The methods used for validation of test sites, such as open area sites and absorber-lined rooms for frequencies in the range of 30 to 1000 MHz, are contained in this standard. Further work on absorber-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect internationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Superseded"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#106913 …}
    #channels: Doctrine\ORM\PersistentCollection {#106919 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#106915 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#106917 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#106905 …}
    -apiLastModifiedAt: DateTime @1754517600 {#106901
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#106902
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @711324000 {#106903
      date: 1992-07-17 00:00:00.0 Europe/Paris (+02:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 112
    -documents: Doctrine\ORM\PersistentCollection {#106907 …}
    -favorites: Doctrine\ORM\PersistentCollection {#106909 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7311
    #id: 9777
    #code: "IEEE00002889"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038548 {#7274
      date: 2025-06-27 17:35:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34117
        #name: "IEEE/ANSI C63.4:2000"
        #slug: "ieee-ansi-c63-4-2000-ieee00002889-241429"
        #description: """
          New IEEE Standard - Active.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment UTE), in the frequency range of 9 kHz to 40 GHz. Methods for the measurement of radiated and power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          These methods are not currently intended for measurement of deliberately radiated energy, such as that from intentional emitters, nor is this standard intended for certification/approval of avionic equipment, except where specifically referenced. Methods of measurement of various types of intentional emitters are under consideration. These methods apply to the measurement of individual units or systems comprised of units. Additional methods may be added to this standard to fulfill future requirements as needed. The methods used for validation of test sites such as open area sites and absorbed-lined rooms for frequencies in the range of 30-1000 MHz are contained in this standard. Further work on absorbed-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect nternationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Interim Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @669510000 {#7318
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @669510000 {#7316
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 140
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  "showFullLabel" => "true"
]

[
  "showFullLabel" => "true"
]

App\Twig\Components\ProductState {#107885
  +product: App\Entity\Product\Product {#7311
    #id: 9777
    #code: "IEEE00002889"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038548 {#7274
      date: 2025-06-27 17:35:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34117
        #name: "IEEE/ANSI C63.4:2000"
        #slug: "ieee-ansi-c63-4-2000-ieee00002889-241429"
        #description: """
          New IEEE Standard - Active.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment UTE), in the frequency range of 9 kHz to 40 GHz. Methods for the measurement of radiated and power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          These methods are not currently intended for measurement of deliberately radiated energy, such as that from intentional emitters, nor is this standard intended for certification/approval of avionic equipment, except where specifically referenced. Methods of measurement of various types of intentional emitters are under consideration. These methods apply to the measurement of individual units or systems comprised of units. Additional methods may be added to this standard to fulfill future requirements as needed. The methods used for validation of test sites such as open area sites and absorbed-lined rooms for frequencies in the range of 30-1000 MHz are contained in this standard. Further work on absorbed-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect nternationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Interim Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @669510000 {#7318
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @669510000 {#7316
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 140
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +appearance: "state-suspended"
  +labels: [
    "Superseded"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}

[
  "product" => App\Entity\Product\Product {#7311
    #id: 9777
    #code: "IEEE00002889"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038548 {#7274
      date: 2025-06-27 17:35:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34117
        #name: "IEEE/ANSI C63.4:2000"
        #slug: "ieee-ansi-c63-4-2000-ieee00002889-241429"
        #description: """
          New IEEE Standard - Active.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment UTE), in the frequency range of 9 kHz to 40 GHz. Methods for the measurement of radiated and power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          These methods are not currently intended for measurement of deliberately radiated energy, such as that from intentional emitters, nor is this standard intended for certification/approval of avionic equipment, except where specifically referenced. Methods of measurement of various types of intentional emitters are under consideration. These methods apply to the measurement of individual units or systems comprised of units. Additional methods may be added to this standard to fulfill future requirements as needed. The methods used for validation of test sites such as open area sites and absorbed-lined rooms for frequencies in the range of 30-1000 MHz are contained in this standard. Further work on absorbed-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect nternationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Interim Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @669510000 {#7318
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @669510000 {#7316
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 140
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
]

App\Twig\Components\ProductMostRecent {#107912
  +product: App\Entity\Product\Product {#7311
    #id: 9777
    #code: "IEEE00002889"
    #attributes: Doctrine\ORM\PersistentCollection {#7701 …}
    #variants: Doctrine\ORM\PersistentCollection {#7744 …}
    #options: Doctrine\ORM\PersistentCollection {#7916 …}
    #associations: Doctrine\ORM\PersistentCollection {#7900 …}
    #createdAt: DateTime @1751038548 {#7274
      date: 2025-06-27 17:35:48.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1754607004 {#7322
      date: 2025-08-08 00:50:04.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7922 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7921
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7311}
        #id: 34117
        #name: "IEEE/ANSI C63.4:2000"
        #slug: "ieee-ansi-c63-4-2000-ieee00002889-241429"
        #description: """
          New IEEE Standard - Active.<br />\n
          U.S. consensus standard methods, instrumentation, and facilities for measurement of radio-frequency (RF) signals and noise emitted from electrical and electronic devices in the frequency range 9 kHz to 40 GHz are specified. This standard does not include generic nor product-specific emission limits. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.<br />\n
          \t\t\t\t<br />\n
          This standard sets forth uniform methods of measurement of radio noise emitted from low-voltage electrical and electronic equipment, including digital and other information technology equipment UTE), in the frequency range of 9 kHz to 40 GHz. Methods for the measurement of radiated and power-line conducted radio noise are covered and may be applied to any such equipment unless otherwise specified by individual equipment requirements.<br />\n
          These methods are not currently intended for measurement of deliberately radiated energy, such as that from intentional emitters, nor is this standard intended for certification/approval of avionic equipment, except where specifically referenced. Methods of measurement of various types of intentional emitters are under consideration. These methods apply to the measurement of individual units or systems comprised of units. Additional methods may be added to this standard to fulfill future requirements as needed. The methods used for validation of test sites such as open area sites and absorbed-lined rooms for frequencies in the range of 30-1000 MHz are contained in this standard. Further work on absorbed-lined room validation is under consideration. An effort has been made, wherever possible, to harmonize the measurement procedures contained herein with those in effect nternationally.
          """
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Interim Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz"
        -notes: "Active"
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7534 …}
    #channels: Doctrine\ORM\PersistentCollection {#7628 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7309 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7613 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7645 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7324 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7321 …}
    -apiLastModifiedAt: DateTime @1754517600 {#7317
      date: 2025-08-07 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: DateTime @1578006000 {#7292
      date: 2020-01-03 00:00:00.0 Europe/Paris (+01:00)
    }
    -author: ""
    -publishedAt: DateTime @669510000 {#7318
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: null
    -confirmedAt: null
    -canceledAt: DateTime @669510000 {#7316
      date: 1991-03-21 00:00:00.0 Europe/Paris (+01:00)
    }
    -edition: null
    -coreDocument: "C63.4"
    -bookCollection: ""
    -pageCount: 140
    -documents: Doctrine\ORM\PersistentCollection {#7465 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7500 …}
  }
  +label: "Historical"
  +icon: "historical"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}