GET https://dev.normadoc.fr/_partial/product/ASME500082_2025PNI/features

Response
200 OK
IP
216.73.216.146
Profiled on
Token
04b694

Components

3 Twig Components
5 Render Count
2 ms Render Time
74.0 MiB Memory Usage

Components

Name Metadata Render Count Render Time
ProductState 
"App\Twig\Components\ProductState"
components/ProductState.html.twig 		2 0.44ms
ProductMostRecent 
"App\Twig\Components\ProductMostRecent"
components/ProductMostRecent.html.twig 		2 1.36ms
ProductType 
"App\Twig\Components\ProductType"
components/ProductType.html.twig 		1 0.19ms

Render calls

ProductState App\Twig\Components\ProductState 68.0 MiB 0.28 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 13449
    #code: "ASME500082_2025PNI"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1757800959 {#7274
      date: 2025-09-14 00:02:39.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1757887297 {#7322
      date: 2025-09-15 00:01:37.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 48802
        #name: "ASME BPVC.VIII.2-2025"
        #slug: "asme-bpvc-viii-2-2025-asme500082-2025pni-590321"
        #description: "This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. These rules provide an alternative to the minimum requirements for pressure vessels under Division 1 rules. In comparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensify values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the U2 and UV ASME Product Certification Marks are also included. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757800800 {#7317
      date: 2025-09-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @1735686000 {#7292
      date: 2025-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @1751320800 {#7318
      date: 2025-07-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "ASME500082_2025PNI"
    -bookCollection: ""
    -pageCount: 935
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#92494
  +product: App\Entity\Product\Product {#7310
    #id: 13449
    #code: "ASME500082_2025PNI"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1757800959 {#7274
      date: 2025-09-14 00:02:39.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1757887297 {#7322
      date: 2025-09-15 00:01:37.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 48802
        #name: "ASME BPVC.VIII.2-2025"
        #slug: "asme-bpvc-viii-2-2025-asme500082-2025pni-590321"
        #description: "This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. These rules provide an alternative to the minimum requirements for pressure vessels under Division 1 rules. In comparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensify values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the U2 and UV ASME Product Certification Marks are also included. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757800800 {#7317
      date: 2025-09-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @1735686000 {#7292
      date: 2025-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @1751320800 {#7318
      date: 2025-07-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "ASME500082_2025PNI"
    -bookCollection: ""
    -pageCount: 935
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductType App\Twig\Components\ProductType 68.0 MiB 0.19 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 13449
    #code: "ASME500082_2025PNI"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1757800959 {#7274
      date: 2025-09-14 00:02:39.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1757887297 {#7322
      date: 2025-09-15 00:01:37.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 48802
        #name: "ASME BPVC.VIII.2-2025"
        #slug: "asme-bpvc-viii-2-2025-asme500082-2025pni-590321"
        #description: "This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. These rules provide an alternative to the minimum requirements for pressure vessels under Division 1 rules. In comparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensify values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the U2 and UV ASME Product Certification Marks are also included. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757800800 {#7317
      date: 2025-09-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @1735686000 {#7292
      date: 2025-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @1751320800 {#7318
      date: 2025-07-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "ASME500082_2025PNI"
    -bookCollection: ""
    -pageCount: 935
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductType {#92679
  +product: App\Entity\Product\Product {#7310
    #id: 13449
    #code: "ASME500082_2025PNI"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1757800959 {#7274
      date: 2025-09-14 00:02:39.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1757887297 {#7322
      date: 2025-09-15 00:01:37.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 48802
        #name: "ASME BPVC.VIII.2-2025"
        #slug: "asme-bpvc-viii-2-2025-asme500082-2025pni-590321"
        #description: "This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. These rules provide an alternative to the minimum requirements for pressure vessels under Division 1 rules. In comparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensify values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the U2 and UV ASME Product Certification Marks are also included. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757800800 {#7317
      date: 2025-09-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @1735686000 {#7292
      date: 2025-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @1751320800 {#7318
      date: 2025-07-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "ASME500082_2025PNI"
    -bookCollection: ""
    -pageCount: 935
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Standard"
  -typeAttributeCode: "type"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 68.0 MiB 0.70 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 13449
    #code: "ASME500082_2025PNI"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1757800959 {#7274
      date: 2025-09-14 00:02:39.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1757887297 {#7322
      date: 2025-09-15 00:01:37.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 48802
        #name: "ASME BPVC.VIII.2-2025"
        #slug: "asme-bpvc-viii-2-2025-asme500082-2025pni-590321"
        #description: "This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. These rules provide an alternative to the minimum requirements for pressure vessels under Division 1 rules. In comparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensify values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the U2 and UV ASME Product Certification Marks are also included. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757800800 {#7317
      date: 2025-09-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @1735686000 {#7292
      date: 2025-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @1751320800 {#7318
      date: 2025-07-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "ASME500082_2025PNI"
    -bookCollection: ""
    -pageCount: 935
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#92754
  +product: App\Entity\Product\Product {#7310
    #id: 13449
    #code: "ASME500082_2025PNI"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1757800959 {#7274
      date: 2025-09-14 00:02:39.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1757887297 {#7322
      date: 2025-09-15 00:01:37.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 48802
        #name: "ASME BPVC.VIII.2-2025"
        #slug: "asme-bpvc-viii-2-2025-asme500082-2025pni-590321"
        #description: "This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. These rules provide an alternative to the minimum requirements for pressure vessels under Division 1 rules. In comparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensify values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the U2 and UV ASME Product Certification Marks are also included. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757800800 {#7317
      date: 2025-09-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @1735686000 {#7292
      date: 2025-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @1751320800 {#7318
      date: 2025-07-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "ASME500082_2025PNI"
    -bookCollection: ""
    -pageCount: 935
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductState App\Twig\Components\ProductState 74.0 MiB 0.16 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 13449
    #code: "ASME500082_2025PNI"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1757800959 {#7274
      date: 2025-09-14 00:02:39.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1757887297 {#7322
      date: 2025-09-15 00:01:37.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 48802
        #name: "ASME BPVC.VIII.2-2025"
        #slug: "asme-bpvc-viii-2-2025-asme500082-2025pni-590321"
        #description: "This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. These rules provide an alternative to the minimum requirements for pressure vessels under Division 1 rules. In comparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensify values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the U2 and UV ASME Product Certification Marks are also included. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757800800 {#7317
      date: 2025-09-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @1735686000 {#7292
      date: 2025-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @1751320800 {#7318
      date: 2025-07-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "ASME500082_2025PNI"
    -bookCollection: ""
    -pageCount: 935
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  "showFullLabel" => "true"
]
Attributes 
[
  "showFullLabel" => "true"
]
Component 
App\Twig\Components\ProductState {#99709
  +product: App\Entity\Product\Product {#7310
    #id: 13449
    #code: "ASME500082_2025PNI"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1757800959 {#7274
      date: 2025-09-14 00:02:39.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1757887297 {#7322
      date: 2025-09-15 00:01:37.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 48802
        #name: "ASME BPVC.VIII.2-2025"
        #slug: "asme-bpvc-viii-2-2025-asme500082-2025pni-590321"
        #description: "This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. These rules provide an alternative to the minimum requirements for pressure vessels under Division 1 rules. In comparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensify values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the U2 and UV ASME Product Certification Marks are also included. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757800800 {#7317
      date: 2025-09-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @1735686000 {#7292
      date: 2025-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @1751320800 {#7318
      date: 2025-07-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "ASME500082_2025PNI"
    -bookCollection: ""
    -pageCount: 935
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +appearance: "state-active"
  +labels: [
    "Active"
  ]
  -stateAttributeCode: "state"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}
ProductMostRecent App\Twig\Components\ProductMostRecent 74.0 MiB 0.66 ms
Input props 
[
  "product" => App\Entity\Product\Product {#7310
    #id: 13449
    #code: "ASME500082_2025PNI"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1757800959 {#7274
      date: 2025-09-14 00:02:39.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1757887297 {#7322
      date: 2025-09-15 00:01:37.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 48802
        #name: "ASME BPVC.VIII.2-2025"
        #slug: "asme-bpvc-viii-2-2025-asme500082-2025pni-590321"
        #description: "This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. These rules provide an alternative to the minimum requirements for pressure vessels under Division 1 rules. In comparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensify values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the U2 and UV ASME Product Certification Marks are also included. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757800800 {#7317
      date: 2025-09-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @1735686000 {#7292
      date: 2025-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @1751320800 {#7318
      date: 2025-07-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "ASME500082_2025PNI"
    -bookCollection: ""
    -pageCount: 935
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
]
Attributes 
[]
Component 
App\Twig\Components\ProductMostRecent {#99789
  +product: App\Entity\Product\Product {#7310
    #id: 13449
    #code: "ASME500082_2025PNI"
    #attributes: Doctrine\ORM\PersistentCollection {#7700 …}
    #variants: Doctrine\ORM\PersistentCollection {#7743 …}
    #options: Doctrine\ORM\PersistentCollection {#7915 …}
    #associations: Doctrine\ORM\PersistentCollection {#7899 …}
    #createdAt: DateTime @1757800959 {#7274
      date: 2025-09-14 00:02:39.0 Europe/Paris (+02:00)
    }
    #updatedAt: DateTime @1757887297 {#7322
      date: 2025-09-15 00:01:37.0 Europe/Paris (+02:00)
    }
    #enabled: true
    #translations: Doctrine\ORM\PersistentCollection {#7921 …}
    #translationsCache: [
      "en_US" => App\Entity\Product\ProductTranslation {#7920
        #locale: "en_US"
        #translatable: App\Entity\Product\Product {#7310}
        #id: 48802
        #name: "ASME BPVC.VIII.2-2025"
        #slug: "asme-bpvc-viii-2-2025-asme500082-2025pni-590321"
        #description: "This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. These rules provide an alternative to the minimum requirements for pressure vessels under Division 1 rules. In comparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensify values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the U2 and UV ASME Product Certification Marks are also included. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities."
        #metaKeywords: null
        #metaDescription: null
        #shortDescription: "Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules"
        -notes: null
      }
    ]
    #currentLocale: "en_US"
    #currentTranslation: null
    #fallbackLocale: "en_US"
    #variantSelectionMethod: "match"
    #productTaxons: Doctrine\ORM\PersistentCollection {#7533 …}
    #channels: Doctrine\ORM\PersistentCollection {#7627 …}
    #mainTaxon: Proxies\__CG__\App\Entity\Taxonomy\Taxon {#7311 …}
    #reviews: Doctrine\ORM\PersistentCollection {#7612 …}
    #averageRating: 0.0
    #images: Doctrine\ORM\PersistentCollection {#7644 …}
    -supplier: Proxies\__CG__\App\Entity\Supplier\Supplier {#7325 …}
    -subscriptionCollections: Doctrine\ORM\PersistentCollection {#7389 …}
    -apiLastModifiedAt: DateTime @1757800800 {#7317
      date: 2025-09-14 00:00:00.0 Europe/Paris (+02:00)
    }
    -lastUpdatedAt: null
    -author: ""
    -publishedAt: DateTime @1735686000 {#7292
      date: 2025-01-01 00:00:00.0 Europe/Paris (+01:00)
    }
    -releasedAt: DateTime @1751320800 {#7318
      date: 2025-07-01 00:00:00.0 Europe/Paris (+02:00)
    }
    -confirmedAt: null
    -canceledAt: null
    -edition: null
    -coreDocument: "ASME500082_2025PNI"
    -bookCollection: ""
    -pageCount: 935
    -documents: Doctrine\ORM\PersistentCollection {#7464 …}
    -favorites: Doctrine\ORM\PersistentCollection {#7499 …}
  }
  +label: "Most Recent"
  +icon: "check-xs"
  -mostRecentAttributeCode: "most_recent"
  -localeContext: Sylius\Component\Locale\Context\CompositeLocaleContext {#1833 …}
}